SIST EN 13022-1:2006/kFprA1:2009
(Amendment)Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing
This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems.
Only soda lime silicate glasses are taken into consideration in this European Standard.
Plastic glazing is excluded from the scope of this European Standard.
Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) "Structural sealant glazing system".
All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006.
When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.
Glas im Bauwesen - Geklebte Verglasung - Teil 1: Glasprodukte für SSG-Systeme - Einfach- und Mehrfachverglasungen mit und ohne Abtragung des Eigengewichtes
Verre dans la construction - Vitrage extérieur collé (VEC) - Partie 1: Produits verriers pour les sytèmes de vitrages extérieurs collés pour produits monolithiques et produits multiples calés et non calés
Steklo v gradbeništvu - Strukturna zasteklitev - 1. del: Stekleni proizvodi za strukturne zasteklitve za podprte in nepodprte monolitne in sestavljene zasteklitve
General Information
- Status
- Not Published
- Public Enquiry End Date
- 29-Dec-2009
- Technical Committee
- STV - Steklo, svetloba in razsvetljava v gradbeništvu
- Current Stage
- 98 - Abandoned project (Adopted Project)
- Start Date
- 14-Apr-2011
- Due Date
- 19-Apr-2011
- Completion Date
- 15-Apr-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 18-Jan-2023
Overview
EN 13022-1:2006/FprA1 - "Glass in building - Structural sealant glazing - Part 1" is a CEN standard that specifies requirements to verify the suitability for use of supported and unsupported glass products in Structural Sealant Glazing (SSG) systems. It is a supplement to the corresponding glass product standards and applies only to soda‑lime silicate glass. Plastic glazing is excluded. Where relevant, this part must be used alongside the system and installation requirements in EN 13022-2 and ETAG 002.
Key topics and requirements
- Scope and applicability
- Covers monolithic and multiple (insulating/laminated) glass products for SSG systems (supported and unsupported).
- Any glass meeting the requirements is considered suitable for use in SSG systems as defined in ETAG 002.
- Glass types and exclusions
- Only soda‑lime silicate glass is taken into account.
- Plastic glazing is explicitly excluded.
- Installation environment
- Glass products must be installed and bonded under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006.
- Sealant compatibility and UV exposure
- If the outer seal of an insulating glass unit has a structural function and/or is exposed to UV radiation without protection, only silicone‑based sealants are permitted for that construction.
- Amendment highlights (FprA1)
- Adds notes on national regulations (for example, retaining devices may be required; certain SSGS types may be restricted for laminated glass).
- Updates to calculation/verification clauses (flush edge unit calculation revised; reference to prEN 13474-3 for a more accurate β factor).
- Change in dimensional criterion for stepped insulating glass units (R limit adjusted).
Practical applications
- Use EN 13022-1 for:
- Design and verification of bonded façade systems, curtain walls, point‑fixed glazing and other SSG applications that rely on sealant structural performance.
- Material qualification by glass manufacturers and suppliers to demonstrate fitness for SSG use.
- Specification by architects, façade engineers and façade contractors to ensure compliant glass selection.
- Conformity assessment by testing laboratories and certification bodies.
Who uses this standard
- Glass manufacturers and processors
- Façade designers and structural engineers
- Glazing installers and contractors
- Building certifiers, product assessors and regulatory authorities
Related standards
- EN 13022-2:2006 - Structural sealant glazing - Installation and system requirements (installation conditions referenced)
- ETAG 002 - Definition and technical guidance for SSG systems
- prEN 13474-3 - Referenced for the β factor used in glass edge calculations
This standard is critical for safe, durable bonded glazing design and for ensuring that glass products are compatible with structural sealant glazing systems.
Frequently Asked Questions
SIST EN 13022-1:2006/kFprA1:2009 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing". This standard covers: This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems. Only soda lime silicate glasses are taken into consideration in this European Standard. Plastic glazing is excluded from the scope of this European Standard. Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) "Structural sealant glazing system". All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006. When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.
This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems. Only soda lime silicate glasses are taken into consideration in this European Standard. Plastic glazing is excluded from the scope of this European Standard. Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) "Structural sealant glazing system". All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006. When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.
SIST EN 13022-1:2006/kFprA1:2009 is classified under the following ICS (International Classification for Standards) categories: 81.040.20 - Glass in building. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13022-1:2006/kFprA1:2009 has the following relationships with other standards: It is inter standard links to SIST EN 13022-1:2006+A1:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13022-1:2006/kFprA1:2009 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/135. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13022-1:2006/kFprA1:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2009
Steklo v gradbeništvu - Strukturna zasteklitev - 1. del: Stekleni proizvodi za
strukturne zasteklitve za podprte in nepodprte monolitne in sestavljene zasteklitve
Glass in building - Structural sealant glazing - Part 1: Glass products for structural
sealant glazing systems for supported and unsupported monolithic and multiple glazing
Glas im Bauwesen - Geklebte Verglasung - Teil 1: Glasprodukte für SSG-Systeme -
Einfach- und Mehrfachverglasungen mit und ohne Abtragung des Eigengewichtes
Verre dans la construction - Vitrage extérieur collé (VEC) - Partie 1: Produits verriers
pour les sytèmes de vitrages extérieurs collés pour produits monolithiques et produits
multiples calés et non calés
Ta slovenski standard je istoveten z: EN 13022-1:2006/FprA1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 13022-1:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
October 2009
ICS 01.040.81; 81.040.20
English Version
Glass in building - Structural sealant glazing - Part 1: Glass
products for structural sealant glazing systems for supported
and unsupported monolithic and multiple glazing
Verre dans la construction - Vitrage extérieur collé (VEC) - Glas im Bauwesen - Geklebte Verglasung - Teil 1:
Partie 1: Produits verriers pour les sytèmes de vitrages Glasprodukte für SSG-Systeme - Einfach- und
extérieurs collés pour produits monolithiques et produits Mehrfachverglasungen mit und ohne Abtragung des
multiples calés et non calés Eigengewichtes
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 129.
This draft amendment A1, if approved, will modify the European Standard EN 13022-1:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...