Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing

This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems.
Only soda lime silicate glasses are taken into consideration in this European Standard.
Plastic glazing is excluded from the scope of this European Standard.
Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 ) "Structural sealant glazing system".
All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2006.
When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.

Glas im Bauwesen - Geklebte Verglasung - Teil 1: Glasprodukte für SSG-Systeme - Einfach- und Mehrfachverglasungen mit und ohne Abtragung des Eigengewichtes

Verre dans la construction - Vitrage extérieur collé (VEC) - Partie 1: Produits verriers pour les sytèmes de vitrages extérieurs collés pour produits monolithiques et produits multiples calés et non calés

Steklo v gradbeništvu - Strukturna zasteklitev - 1. del: Stekleni proizvodi za strukturne zasteklitve za podprte in nepodprte monolitne in sestavljene zasteklitve

General Information

Status
Not Published
Current Stage
5060 - Closure of Vote - Formal Approval
Due Date
22-Jan-2010
Completion Date
22-Jan-2010

RELATIONS

Buy Standard

Amendment
EN 13022-1:2006/kFprA1:2009
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13022-1:2006/kFprA1:2009
01-december-2009
Steklo v gradbeništvu - Strukturna zasteklitev - 1. del: Stekleni proizvodi za

strukturne zasteklitve za podprte in nepodprte monolitne in sestavljene zasteklitve

Glass in building - Structural sealant glazing - Part 1: Glass products for structural

sealant glazing systems for supported and unsupported monolithic and multiple glazing

Glas im Bauwesen - Geklebte Verglasung - Teil 1: Glasprodukte für SSG-Systeme -
Einfach- und Mehrfachverglasungen mit und ohne Abtragung des Eigengewichtes

Verre dans la construction - Vitrage extérieur collé (VEC) - Partie 1: Produits verriers

pour les sytèmes de vitrages extérieurs collés pour produits monolithiques et produits

multiples calés et non calés
Ta slovenski standard je istoveten z: EN 13022-1:2006/FprA1
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 13022-1:2006/kFprA1:2009 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13022-1:2006/kFprA1:2009
---------------------- Page: 2 ----------------------
SIST EN 13022-1:2006/kFprA1:2009
EUROPEAN STANDARD
FINAL DRAFT
EN 13022-1:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
October 2009
ICS 01.040.81; 81.040.20
English Version
Glass in building - Structural sealant glazing - Part 1: Glass
products for structural sealant glazing systems for supported
and unsupported monolithic and multiple glazing

Verre dans la construction - Vitrage extérieur collé (VEC) - Glas im Bauwesen - Geklebte Verglasung - Teil 1:

Partie 1: Produits verriers pour les sytèmes de vitrages Glasprodukte für SSG-Systeme - Einfach- und

extérieurs collés pour produits monolithiques et produits Mehrfachverglasungen mit und ohne Abtragung des

multiples calés et non calés Eigengewichtes

This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee

CEN/TC 129.

This draft amendment A1, if approved, will modify the European Standard EN 13022-1:2006. If this draft becomes an amendment, CEN

members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment

into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made

by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and

shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.