SIST EN ISO 13982-1:2005
(Main)Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
Protective clothing for use against solid particulates - Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)
This European Standard specifies the minimum requirements for chemical protective clothing resistant to penetration by airborne solid particles (Type 5). These garments are full-body protective clothing, i.e. covering trunk, arms and legs, such as one-piece coveralls or two piece suits, with or without hood or visors, with or without foot protection. Requirements for component parts, such as hoods, gloves, boots, visors or respiratory protective equipment may be specified in other European Standards.
NOTE 1 The suitability of type 5 clothing should be determined for each specific chemical substance and its acceptable exposure limits in relation to the inward leakage of the type 5 garment. Hence, it is possible, that this type of clothing does not offer adequate protection from aerosols of highly hazardous substances, where a type 1 garment may be necessary to obtain the level of protection needed.
NOTE 2 The scope of this standard is restricted to airborne solid particles. Other forms of challenge by solid chemicals, e.g. penetration of chemical dust through materials by rubbing or flexing are not covered and may form the object of separate standards.
Schutzkleidung gegen feste Partikeln - Teil 1: Leistungsanforderungen an Chemikalienschutzkleidung, die für den gesamten Körper einen Schutz gegen luftgetragene feste Partikeln gewährt (Kleidung Typ 5) (ISO 13982-1:2004)
Diese Europäische Norm legt die Mindestanforderungen an teilchendichte Chemikalienschutzkleidung fest, die widerstandsfähig gegen die Penetration schwebender fester Teilchen (Schwebstaub) ist (Typ 5). Bei diesen Kleidungsstücken handelt es sich um Ganzkörperschutzkleidung, d. h. eine solche, die den Rumpf, die Arme und die Beine bedeckt, z. B. einteilige Overalls oder zweiteilige Anzüge mit oder ohne Haube oder Sichtscheiben, mit oder ohne Fußschutz. Anforderungen an Bestandteile, wie Hauben, Handschuhe, Stiefel, Sichtscheiben oder Atemschutzgeräte, können in weiteren Europäischen Normen festgelegt sein.
Dieser Teil der EN ISO 13982 gilt nur für schwebende feste Teilchen. Er gilt nicht für weitere Arten der Beanspruchung durch feste Chemikalien, z. B. die durch Reiben oder Biegen stattfindende Penetration von Chemikalienstaub durch Materialien hindurch, die Gegenstand weiterer Normen sein können.
Vetements de protection a utiliser contre les particules solides - Partie 1: Exigences de performance des vetements de protection contre les produits chimiques offrant une protection au corps entier contre les particules solides transportées par l'air (vetements de type 5) (ISO 13982-1:2004)
La présente Norme Européenne spécifie les exigences minimales pour les vetements de protection chimique résistant a la pénétration de particules solides présentes dans l'air (Type 5). Ces vetements protegent tout le corps, par exemple le torse, les bras et les jambes, tels que des combinaisons une piece ou deux pieces, avec ou sans cagoule ou oculaire, avec ou sans protection du pied. Les exigences en ce qui concerne les parties composantes, comme les cagoules, les gants, les bottes, les oculaires ou les équipements de protection respiratoire peuvent etre spécifiés dans d'autres Normes Européennes.
NOTE 1 Il convient que la bonne adaptation d'un vetement de type 5 soit déterminée pour chaque substance chimique spécifique et ses limites d'expositions acceptables en relation avec la fuite vers l'intérieur d'un article d'habillement de type 5. De la il est possible que ce type de vetement n'offre pas une protection adéquate contre les aérosols de substances hautement dangereuses, lorsqu'un article d'habillement de type 1 peut etre nécessaire pour obtenir le niveau de protection nécessaire.
NOTE 2 Le domaine d'application de cette norme est restreint au particules solides présentes dans l'air. D'autres formes de challenges par des chimiques solides, par exemple la pénétration de poussieres chimiques dans des matériaux par frottement ou flexion n'est pas couverte et peut faire l'objet de normes séparées.
Varovalna obleka za varovanje pred trdnimi delci – 1. del: Zahteve za varovalno obleko, ki varuje pred kemikalijami in zagotavlja zaščito celega telesa pred trdnimi delci v zraku (oblačilo tipa 5) (ISO 13982-1:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13982-1:2005
01-april-2005
9DURYDOQDREOHND]DYDURYDQMHSUHGWUGQLPLGHOFL±GHO =DKWHYH]DYDURYDOQR
REOHNRNLYDUXMHSUHGNHPLNDOLMDPLLQ]DJRWDYOMD]DãþLWRFHOHJDWHOHVDSUHGWUGQLPL
GHOFLY]UDNX REODþLORWLSD ,62
Protective clothing for use against solid particulates - Part 1: Performance requirements
for chemical protective clothing providing protection to the full body against airborne solid
particulates (type 5 clothing) (ISO 13982-1:2004)
Schutzkleidung gegen feste Partikeln - Teil 1: Leistungsanforderungen an
Chemikalienschutzkleidung, die für den gesamten Körper einen Schutz gegen
luftgetragene feste Partikeln gewährt (Kleidung Typ 5) (ISO 13982-1:2004)
Vetements de protection a utiliser contre les particules solides - Partie 1: Exigences de
performance des vetements de protection contre les produits chimiques offrant une
protection au corps entier contre les particules solides transportées par l'air (vetements
de type 5) (ISO 13982-1:2004)
Ta slovenski standard je istoveten z: EN ISO 13982-1:2004
ICS:
13.340.10 Varovalna obleka Protective clothing
SIST EN ISO 13982-1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 13982-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2004
ICS 13.340.10
English version
Protective clothing for use against solid particulates - Part 1:
Performance requirements for chemical protective clothing
providing protection to the full body against airborne solid
particulates (type 5 clothing) (ISO 13982-1:2004)
Vêtements de protection à utiliser contre les particules Schutzkleidung gegen Teilchen fester Chemikalien - Teil 1:
solides - Partie 1: Exigences de performance des Leistungsanforderungen an Chemikalienschutzkleidung, die
vêtements de protection contre les produits chimiques für den gesamten Körper einen Schutz gegen schwebende
offrant une protection au corps entier contre les particules Teilchen fester Chemikalien gewähren (Kleidung Typ 5)
solides transportées par l'air (vêtements de type 5) (ISO (ISO 13982-1:2004)
13982-1:2004)
This European Standard was approved by CEN on 12 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13982-1:2004: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 13982-1:2004 (E)
Foreword
This document (EN ISO 13982-1:2004) has been prepared by Technical Committee CEN/TC 162 "Protective
clothing including hand and arm protection and lifejackets", the secretariat of which is held by DIN, in
collaboration with Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2005, and conflicting national standards shall be withdrawn at
the latest by May 2005.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
---------------------- Page: 3 ----------------------
EN ISO 13982-1:2004 (E)
Annex ZA
(Informative)
Clauses of this European Standard addressing essential requirements
or other provisions of EU Directives
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide a means of conforming to Essential Requirements of
the New Approach Directive 89/686/EEC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the clauses of this
standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant
Essential Requirements of that Directive and associated EFTA regulations.
Table 1 – Correspondence between this European standard and Directive 89/686/EEC
Clause/
sub-clauses Essential Requirements of Directive 89/686/EEC, Annex II
of the
Standard
4.1 1.2.1.1 Suitable constituent materials
4.1 1.3.2 Lightness and design strength
4.2 1.3.2 Lightness and design strength
4.2.1 3.10.2 Protection against cutaneous and ocular contact
4.3 1.3.1 Adaptation of PPE to user morphology
4.3 1.3.3 Compatibility of different classes or types of PPE designed for
simultaneous use
4.3.1 1.1.2.1 Highest level of protection possible
4.3.1 1.2.1.2 Satisfactory surface condition of all PPE parts in contact with the
user
4.3.2 1.1.1 Ergonomics
4.3.2 1.1.2.1 Highest level of protection possible
4.3.2 1.2.1.3 Maximum permissible use impediment
4.3.2 3.10.2 Protection against cutaneous and ocular contact
5 1.4 Information supplied by the manufacturer
5 2.12 PPE bearing one or more identification or recognition marks
directly or indirectly relating to health and safety
6 1.3.3 Compatibility of different classes or types of PPE designed for
simultaneous use
6 1.4 Information supplied by the manufacturer
6 2.12 PPE bearing one or more identification or recognition marks
directly or indirectly relating to health and safety
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within
the scope of this standard.
3
---------------------- Page: 4 ----------------------
INTERNATIONAL ISO
STANDARD 13982-1
First edition
2004-11-15
Protective clothing for use against solid
particulates —
Part 1:
Performance requirements for chemical
protective clothing providing protection
to the full body against airborne solid
particulates (type 5 clothing)
Vêtements de protection à utiliser contre les particules solide —
Partie 1: Exigences de performance des vêtements de protection contre
les produits chimiques offrant une protection au corps entier contre les
particules solides transportées par l'air (vêtements de type 5)
Reference number
ISO 13982-1:2004(E)
©
ISO 2004
---------------------- Page: 5 ----------------------
ISO 13982-1:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 13982-1:2004(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Performance requirements . 2
5 Marking. 4
6 Information supplied by the manufacturer. 5
Bibliography . 7
© ISO 2004 – All rights reserved iii
---------------------- Page: 7 ----------------------
ISO 13982-1:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13982-1 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 162, Protective clothing including hand and arm protection and lifejackets, in collaboration with
Technical Committee ISO/TC 94, Personal safety — Protective clothing and equipment, Subcommittee SC 13,
Protective clothing, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
ISO 13982 consists of the following parts, under the general title Protective clothing for use against solid
particulates:
Part 1: Performance requirements for chemical protective clothing providing protection to the full body
against airborne solid particulates (type 5 clothing)
Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits
iv © ISO 2004 – All rights reserved
---------------------- Page: 8 ----------------------
ISO 13982-1:2004(E)
Introduction
It is necessary to determine the suitability of type 5 clothing for each specific chemical substance and its
acceptable exposure limits in relation to the inward leakage of the type 5 garment. Hence, it is possible, that
this type of clothing does not offer adequate protection from aerosols of highly hazardous substances, where
a type 1 garment might be necessary to obtain the level of protection needed.
© ISO 2004 – All rights reserved v
---------------------- Page: 9 ----------------------
INTERNATIONAL STANDARD ISO 13982-1:2004(E)
Protective clothing for use against solid particulates —
Part 1:
Performance requirements for chemical protective clothing
providing protection to the full body against airborne solid
particulates (type 5 clothing)
1 Scope
This part of ISO 13982 specifies the minimum requirements for chemical protective clothing resistant to
penetration by airborne solid particles (type 5). These garments are full-body protective clothing, i.e. covering
trunk, arms and legs, such as one-piece coveralls or two piece suits, with or without hood or visors, with or
without foot protection. Requirements for component parts, such as hoods, gloves, boots, visors or respiratory
protective equipment might be specified in other International and European Standards.
This part of ISO 13982 is applicable only to airborne solid particulates. It is n
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.