oSIST prEN ISO 10734:2008

Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO/DIS 10734:2008)

This method is intended to assess the burst strength of a closed slide fastener for footwear. The method is applicable to all types of slide fastener.

Schuhe - Prüfverfahren für Reißverschlüsse - Festigkeit von Reißverschlussgriffen (ISO/DIS 10734:2008)

Die vorliegende Norm legt ein Prüfverfahren zur Beurteilung der Berstfestigkeit eines geschlossenen Reißverschlusses für Schuhe fest. Das Verfahren gilt für sämtliche Arten von Reißverschlüssen.

Chaussures - Méthode d'essai pour les fermetures éclair - Résistance des entraînements auxiliaires des fermetures éclair (ISO/DIS 10734:2008)

Obutev - Preskusna metoda za zadrge - Trdnost drsnega dela (ISO/DIS 10734:2008)

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Aug-2008
• ICS: 61.040 - Headgear. Clothing accessories. Fastening of clothing
• ICS: 61.060 - Footwear
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 15-Jan-2020
• Due Date: 20-Jan-2020
• Completion Date: 15-Jan-2020
• Ref Project: prEN ISO 10734 - Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO/DIS 10734:2008)

Overview

oSIST prEN ISO 10734:2008 is a European standard developed by the Slovenian Institute for Standardization (SIST) that specifies a quantitative test method for evaluating the strength of slide fastener pullers in footwear. Applicable to all types of slide fasteners (such as zippers) used in shoes, boots, and related products, this standardized method is essential for assessing the burst strength of closed slide fasteners to ensure product durability and quality.

The standard supports the footwear industry by providing a uniform approach for testing, fostering comparability between products, and helping manufacturers meet quality and safety expectations in both local and global footwear markets.

Key Topics

• Test Methods for Slide Fastener Pullers: The standard describes two key methods for assessing puller strength:
  • Tension Method: Measures the maximum force required to pull the puller from the slider along its longitudinal axis.
  • Torsion Method: Measures the torque required to twist the puller from the slider.
• Applicability: Covers all types of slide fasteners used in footwear, ensuring broad relevance.
• Repeatability and Accuracy: Details minimum numbers of test specimens and specifies requirements for testing equipment, such as tension and torsion devices with appropriate accuracy standards.
• Failure Analysis: Requires detailed reporting on modes of failure (e.g., puller or slider breaking at various points).
• Reporting Requirements: Outlines the necessary information to be included in any test report, ensuring traceability and consistency across different laboratories and manufacturers.
• Reference Norms: This standard references other key footwear testing standards for sample preparation, conditioning, and terminology.

Applications

Implementing oSIST prEN ISO 10734:2008 benefits several stakeholders within the footwear supply chain:

• Quality Control in Footwear Manufacturing: Enables manufacturers to evaluate the strength and reliability of slide fasteners before products reach consumers, reducing the risk of premature failures and returns.
• Product Development: Facilitates the selection of materials and designs for slide fastener pullers, ensuring compliance with international performance benchmarks.
• Supplier Evaluation: Allows brands and buyers to compare the durability of slide fasteners from different suppliers using a recognized, standardized method.
• Regulatory Compliance: Assists companies in meeting consumer safety and product durability requirements in regulated markets.
• Third-Party Testing: Provides test laboratories and certification bodies a clear protocol for assessing compliance in footwear products.

By ensuring robust, repeatable testing procedures, this standard helps uphold product quality and consumer confidence in footwear products featuring slide fasteners.

Related Standards

oSIST prEN ISO 10734:2008 references and aligns with several other international standards relevant to footwear testing:

• ISO 7500-1: Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines, concerning calibration and verification of equipment.
• ISO 17709: Footwear - Sampling location, preparation, and duration of conditioning of samples and test pieces.
• ISO 18454: Footwear - Standard atmospheres for conditioning and testing.
• ISO 19952: Footwear - Vocabulary.

These associated standards provide further guidance on testing environment, preparation, and terminology, ensuring holistic and consistent quality assurance practices for footwear using slide fasteners.

---

By adhering to oSIST prEN ISO 10734:2008, organizations can standardize their slide fastener puller testing processes, enhance product reliability, and meet international expectations for footwear quality.

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2008
Obutev - Preskusna metoda za zadrge - Trdnost drsnega dela (ISO/DIS 10734:2008)
Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO/DIS
10734:2008)
Schuhe - Prüfverfahren für Reißverschlüsse - Festigkeit von Reißverschlussgriffen
(ISO/DIS 10734:2008)
Chaussures - Méthode d'essai pour les fermetures éclair - Résistance des
entraînements auxiliaires des fermetures éclair (ISO/DIS 10734:2008)
Ta slovenski standard je istoveten z: prEN ISO 10734
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
61.060 Obuvala Footwear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2008
ICS 61.040
English Version
Footwear - Test method for slide fasteners - Strength of slide
fastener pullers (ISO/DIS 10734:2008)
Chaussures - Méthode d'essai pour les fermetures éclair - Schuhe - Prüfverfahren für Reißverschlüsse - Festigkeit
Résistance des entraînements auxiliaires des fermetures von Reißverschlussgriffen (ISO/DIS 10734:2008)
éclair (ISO/DIS 10734:2008)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 309.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 10734:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This document (prEN ISO 10734:2008) has been prepared by Technical Committee CEN/TC 309 “Footwear”
the secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This document is currently submitted to the parallel Enquiry.

DRAFT INTERNATIONAL STANDARD ISO/DIS 10734
ISO/TC 216 Secretariat: AENOR
Voting begins on: Voting terminates on:
2008-04-24 2008-09-24
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Footwear — Test method for slide fasteners — Strength of slide
fastener pullers
Chaussures — Méthode d'essai pour les fermetures éclair — Résistance des entraînements auxiliaires des
fermetures éclair
ICS 61.060
ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2008

ISO/DIS 10734
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2008 – All rights reserved

ISO/DIS 10734
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .1
4 Principle.1
5 Apparatus and materials.2
5.1 Method 1 Tension .2
5.2 Method 2 Torsion.2
6 Procedure.2
6.1
...