SIST EN 13282-3:2024
(Main)Hydraulic road binders - Part 3: Assessment and verification of constancy of performance
Hydraulic road binders - Part 3: Assessment and verification of constancy of performance
This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of hydraulic road binders, including certification of conformity of the factory production control.
This document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing), assessment of the performance of the hydraulic road binder, initial inspection of the manufacturing plant and of factory production control and continuing surveillance, assessment and evaluation of factory production control.
This document is intended to be linked with the Annexes ZA of the European Standards covering hydraulic road binders, i.e. EN 13282-1 and EN 13282-2.
NOTE The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.
Hydraulische Tragschichtbinder - Teil 3: Bewertung und Überprüfung der Leistungsbeständigkeit
Dieses Dokument legt das Verfahren zur Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP) von hydraulischen Tragschichtbindern einschließlich der Zertifizierung der Konformität der werkseigenen Produktionskontrolle fest.
Dieses Dokument enthält technische Regeln für die werkseigene Produktionskontrolle, die zusätzliche Prüfung von im Herstellungsbetrieb entnommenen Proben (interne Überwachungsprüfung), die Bewertung der Leistung des hydraulischen Tragschichtbinders, die Erstinspektion des Herstellungsbetriebs und der werkseigenen Produktionskontrolle sowie die kontinuierliche Überwachung, Bewertung und Evaluierung der werkseigenen Produktionskontrolle.
Dieses Dokument ist dafür vorgesehen, in Verbindung mit Anhang ZA der Europäischen Normen zu hydraulischen Tragschichtbindern, d. h. EN 13282 1 und EN 13282 2, gelesen zu werden.
ANMERKUNG Dieses gesonderte Dokument wurde aus dem Grund erarbeitet, dass die darin enthaltenen Bestimmungen auf unterschiedliche Produkte, die von unterschiedlichen Europäischen Normen abgedeckt werden, anwendbar sind.
Liants hydrauliques routiers - Partie 3: Évaluation et vérification de la constance des performances
Le présent document spécifie le système d’évaluation et de vérification de la constance des performances (EVCP) des liants hydrauliques routiers, qui inclut une certification de conformité du contrôle de la production en usine.
Le présent document fournit les règles techniques pour le contrôle de la production en usine, les essais complémentaires sur des échantillons prélevés dans l’établissement de fabrication (essais d’autocontrôle), l’évaluation des performances du liant hydraulique routier, l’inspection initiale de l’établissement de fabrication et du contrôle de la production en usine, et la surveillance, l’évaluation et l’appréciation permanentes du contrôle de la production en usine.
Le présent document est destiné à être mis en relation avec les Annexes ZA des Normes européennes traitant des liants hydrauliques routiers, à savoir l’EN 13282 1 et l’EN 13282 2.
NOTE La raison pour laquelle ce document séparé a été rédigé est que les dispositions qu’il contient sont applicables à différents produits couverts par des Normes européennes différentes.
Hidravlična veziva za ceste - 3. del: Ocenjevanje in preverjanje nespremenljivosti lastnosti
Ta dokument določa shemo za ocenjevanje in preverjanje nespremenljivosti lastnosti (AVCP) hidravličnih veziv za ceste, vključno s certificiranjem skladnosti kontrole proizvodnje v obratu.
Ta dokument podaja tehnična pravila za kontrolo proizvodnje v obratu, nadaljnje preskušanje vzorcev v proizvodnem obratu (notranje kontrolno preskušanje), ocenjevanje lastnosti hidravličnih veziv za ceste, začetni pregled proizvodnega obrata in kontrole proizvodnje v obratu ter stalni nadzor, ocenjevanje in vrednotenje kontrole proizvodnje v obratu.
Ta dokument je namenjen za povezavo z dodatkoma ZA evropskih standardov, ki obravnavata hidravlična veziva za ceste, tj. EN 13282-1 in EN 13282-2.
OPOMBA: Razlog za pripravo tega ločenega dokumenta je v tem, da se določbe, ki jih vsebuje, uporabljajo za različne izdelke, zajete v različnih evropskih standardih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2024
Nadomešča:
SIST EN 13282-3:2015
Hidravlična veziva za ceste - 3. del: Ocenjevanje in preverjanje nespremenljivosti
lastnosti
Hydraulic road binders - Part 3: Assessment and verification of constancy of
performance
Hydraulische Tragschichtbinder - Teil 3: Bewertung und Überprüfung der
Leistungsbeständigkeit
Liants hydrauliques routiers - Partie 3: Évaluation et vérification de la constance des
performances
Ta slovenski standard je istoveten z: EN 13282-3:2024
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13282-3
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13282-3:2015
English Version
Hydraulic road binders - Part 3: Assessment and
verification of constancy of performance
Liants hydrauliques routiers - Partie 3: Évaluation et Hydraulische boden und Tragschichtbinder - Teil 3:
vérification de la constance de la performances Bewertung und Überprüfung der
Leistungsbeständigkeit
This European Standard was approved by CEN on 15 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13282-3:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Factory production control . 7
4.1 General requirements . 7
4.1.1 Concept . 7
4.1.2 Works' quality documentation. 7
4.1.3 Quality management system . 8
4.1.4 System of documentation . 8
4.2 Internal quality control. 8
4.2.1 Process control. 8
4.2.2 Measuring and testing . 9
4.2.3 Handling, storage, packaging and delivery . 9
5 Assessment of the performance of the hydraulic road binder . 9
6 Autocontrol testing of samples .10
6.1 Sampling and testing .10
6.2 Corrective action .10
6.3 Measuring and test equipment for autocontrol testing .10
6.4 Quality records .10
7 Tasks for the purpose of certification .10
7.1 Initial inspection of the manufacturing plant and the factory production control .10
7.1.1 Inspection of a new factory .10
7.1.2 Inspection of an existing factory .11
7.1.3 Criteria for the assessment of the production equipment .11
7.1.4 Criteria for the assessment of laboratories .11
7.2 Continuing surveillance, assessment and evaluation of factory production control .12
7.2.1 Inspection of the factory production control .12
7.3 Reports .12
7.4 Actions to be taken in the event of non-conformity .12
8 Procedure for certification of conformity of the factory production control .12
Bibliography .13
European foreword
This document (EN 13282-3:2024) has been prepared by Technical Committee CEN/TC 51 “Cement and
building limes”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards shall
be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13282-3:2015.
This European Standard series, EN 13282, Hydraulic road binders, consists of the following parts:
— Part 1: Rapid hardening hydraulic road binders — Composition, specifications and conformity criteria;
— Part 2: Normal hardening hydraulic road binders — Composition, specifications and conformity
criteria;
— Part 3: Assessment and verification of constancy of performance.
This document should be linked with Annexes ZA of European Standards covering hydraulic road
binders, i.e. EN 13282-1 and EN 13282-2 [1, 2].
NOTE The reason for having drafted this separate document is that the provisions it includes are applicable to
different products covered by different European Standards.
Compared to the previous edition, EN 13282-3:2015, the following significant technical changes have
been included in this document:
a) use of the terminology given by the Delegated Regulation (EU) No 568/2014 amending Annex V to
Regulation (EU) No 305/2011 (Construction Products Regulation) [3, 4], in particular adoption of
the tasks defined in the Delegated Regulation for AVCP system 2+ for a re-arrangement of the clauses
of this document;
b) numbering of the clauses according to the order of the tasks specified in this Delegated Regulation;
c) removal of the rules for dispatching centres;
d) clarification/specification of the rules for depots;
e) replacement of the term “works’ quality manual” by “works’ quality documentation”;
f) replacement of the term “management representative” by “quality manager”.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies the scheme for the assessment and verification of constancy of performance
(AVCP) of hydraulic road binders, including certification of conformity of the factory production control.
This document provides technical rules for factory production control, testing of samples taken at the
manufacturing plant (autocontrol testing), assessment of the performance of the hydraulic road binder,
initial inspection of the manufacturing plant and of factory production control and continuing
surveillance, assessment and evaluation of factory production control.
The guidelines given in the Technical Report CEN/TR 14245 [5] contain information for the application
of this document.
NOTE In the context of this document the term, “construction product” refers to hydraulic road binder.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 196-7, Methods of testing cement — Part 7: Methods of taking and preparing samples of cement
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org
NOTE In the context of this document the term, “construction product” refers to hydraulic road binder.
3.1
AVCP
abbreviation for assessment and verification of constancy of performance
3.2
certificate of conformity of the factory production control
document issued under the rules of this scheme for the AVCP indicating that adequate confidence is
provided that factory production control is in conformity with the relevant product specification
standard
3.3
factory production control certification body
body notified in accordance with Chapter VII of Regulation (EU) No 305/2011 to carry out factory
production control certification
3.4
factory production control
documented, permanent and internal control of production in a factory, in accordance with the relevant
harmonised technical specifications
[SOURCE: Regulation (EU) No 305/2011, Article 2, 26 (Construction Product Regulation)]
3.5
factory
facility used by a manufacturer for the production of hydraulic road binders using equipment which is
suitable for continuous mass production of hydraulic road binder including, in particular, equipment for
adequate grinding and homogenisation and the necessary silo capacity for the storage and dispatch of
each hydraulic road binder produced
Note 1 to entry: This equipment and the production control applied allow the control of production with
sufficient accuracy.
3.6
new factory
factory for which the conformity of the factory production control has not been certified using this
European Standard
3.7
existing factory
factory for which the conformity of the factory production control has already been certified using this
European Standard
3.8
depot
bulk hydraulic road binder handling facility (not located at the factory) used for the dispatch of hydraulic
road binder, whether in bulk or bagged, after transfer or storage where the manufacturer has full
responsibility for all aspects of the quality of the hydraulic road binder
3.9
distributor
natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a
construction product available on the market
[SOURCE: Regulation (EU) No 305/2011, Article 2, 26 (Construction Product Regulation)]
Note 1 to entry: In the context of this document the term, “construction product” refers to hydraulic road binder.
3.10
importer
natural or legal person established within the European Union, who places a construction product from
a third country on the European Union market
[SOURCE: Regulation (EU) No 305/2011, Article 2, 26 (Construction Product Regulation)]
3.11
assessmen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.