oSIST prEN ISO 6369:2022
(Main)Ice makers for commercial use - Classification, requirements and test conditions (ISO/DIS 6369:2022)
Ice makers for commercial use - Classification, requirements and test conditions (ISO/DIS 6369:2022)
This Standard specifies methods for the measurement of energy consumption, water consumption and ice production capacity of ice makers and harvested ice characteristics for commercial use.
This Standard does not apply to:
- ice makers intended to be incorporated in appliances for household use;
- ice makers with remote condensing units.
Eisbereiter für die gewerbliche Anwendung – Klassifizierung, Anforderungen und Testbedingungen (ISO/DIS 6369:2022)
Machines à glaçons à usage commercial - Classification, exigences et conditions d'essai (ISO/DIS 6369:2022)
Izdelovalci ledu za komercialno uporabo - Razvrstitev, zahteve in preskusni pogoji (ISO/DIS 6369:2022)
General Information
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN ISO 6369:2022
01-junij-2022
Izdelovalci ledu za komercialno uporabo - Razvrstitev, zahteve in preskusni pogoji
(ISO/DIS 6369:2022)Ice makers for commercial use - Classification, requirements and test conditions
(ISO/DIS 6369:2022)
Eisbereiter für die gewerbliche Anwendung – Klassifizierung, Anforderungen und
Testbedingungen (ISO/DIS 6369:2022)
Machines à glaçons à usage commercial - Classification, exigences et conditions d'essai
(ISO/DIS 6369:2022)Ta slovenski standard je istoveten z: prEN ISO 6369
ICS:
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
oSIST prEN ISO 6369:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN ISO 6369:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 6369:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 6369
ISO/TC 86/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:
2022-04-18 2022-07-11
Ice makers for commercial use — Classification,
requirements and test conditions
ICS: 97.130.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 6369:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 6369:2022
ISO/DIS 6369:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 6369:2022
ISO/DIS 6369:2022(E)
Contents Page
Foreword ........................................................................................................................................................................................................................................iv
1 Scope ................................................................................................................................................................................................................................. 1
2 Normative references ..................................................................................................................................................................................... 1
3 Terms and definitions .................................................................................................................................................................................... 1
3.1 Types of appliances ............................................................................................................................................................................. 1
3.2 Type of ice ................................................................................................................................................................................................... 2
3.3 Type of production .............................................................................................................................................................................. 2
4 Measurement of energy consumption, water consumption and ice productioncapacity .......................................................................................................................................................................................................................... 3
4.1 General ........................................................................................................................................................................................................... 3
4.2 Test room ..................................................................................................................................................................................................... 3
4.2.1 Ambient temperature..................................................................................................................................................... 4
4.2.2 Water supply .......................................................................................................................................................................... 4
4.3 Location of unit in test room ...................................................................................................................................................... 5
4.4 Power supply ............................................................................................................................................................................................ 5
4.5 Set-up and operation of the ice maker ............................................................................................................................... 5
4.5.1 Ice maker set-up .................................................................................................................................................................. 5
4.5.2 Ice maker operation ......................................................................................................................................................... 5
4.6 Accuracy of measurement and instrumentation ..................................................................................................... 5
4.7 Test procedure ........................................................................................................................................................................................ 6
4.7.1 Simultaneous tests ........................................................................................................................................................... 6
4.7.2 Stabilization ............................................................................................................................................................................ 6
4.7.3 Ice sampling ............................................................................................................................................................................ 6
4.8 Recording .................................................................................................................................................................................................... 6
4.8.1 General ........................................................................................................................................................................................ 6
4.8.2 Ice production capacity test ..................................................................................................................................... 7
4.8.3 Water consumption test............................................................................................................................................... 7
4.8.4 Energy consumption test ............................................................................................................................................ 7
4.9 Calculations ............................................................................................................................................................................................... 7
4.9.1 Ice production capacity ................................................................................................................................................ 7
4.9.2 Cooling water used in condenser ......................................................................................................................... 7
4.9.3 Potable water used in ice-making ....................................................................................................................... 7
4.9.4 Energy consumption ....................................................................................................................................................... 8
5 Ice quality measurement by method of calorimetry ..................................................................................................... 8
5.1 Instrumentation .................................................................................................................................................................................... 8
5.2 Procedure for calorimeter constant determination ............................................................................................. 8
5.3 Procedure for determining net cooling effect of harvested ice .................................................................. 9
6 Information to be declared ....................................................................................................................................................................11
iii© ISO 2022 – All rights reserved
---------------------- Page: 5 ----------------------
oSIST prEN ISO 6369:2022
ISO/DIS 6369:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.This document was prepared by Technical Committee ISO/TC 86, Subcommittee SC 7 Testing and
rating of commercial refrigerated display cabinets and Technical Committee CEN/TC 44, Commercial
refrigerated cabinets, catering refrigerating appliances and industrial refrigeration in collaboration.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.© ISO 2022 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 6369:2022
DRAFT INTERNATIONAL STANDARD ISO/DIS 6369:2022(E)
Ice makers for commercial use — Classification,
requirements and test conditions
1 Scope
This Standard specifies methods for the measurement of energy consumption, water consumption, ice
production capacity and of harvested ice characteristics of ice makers for commercial use.
This Standard does not apply to:— ice makers intended to be incorporated in appliances for household use;
— ice makers with remote condensing units.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp— IEC Electropedia: available at https:// www .electropedia .org/
3.1 Types of appliances
3.1.1
ice maker
factory-made appliance consisting of a condensing unit and ice-making section operating as an
integrated unit, with means for making and harvesting ice, also including means for storing or
dispensing ice, or bothNote 1 to entry: Ice makers are intended to produce ice in irregular shapes or flakes or ribbons or wafers as well
as uniformly shaped ice cubes.3.1.1.1
ice maker with built-in condensing unit
appliance in which the refrigeration unit is an integral part of the cabinet
3.1.1.2
ice maker with remote condensing unit
appliance in which the compressors, condensers and liquid receivers (when required) are not supplied
with the cabinet3.1.1.3
split ice maker
appliance in which the condenser is not integrated in the main ice making unit and the condenser and
piping are made in accordance with manufacturers indications using dedicated condensers
© ISO 2022 – All rights reserved---------------------- Page: 7 ----------------------
oSIST prEN ISO 6369:2022
ISO/DIS 6369:2022(E)
3.1.1.4
water cooled ice maker
appliance in which the condenser is cooled by use of water
3.1.1.5
air cooled ice maker
appliance in which the condenser is cooled by use of air
3.2 Type of ice
3.2.1
ice cube
single piece of ice that can have different shapes (e.g. dice, cylinder, ball, etc.) and is produced by a batch
type ice maker3.2.2
ice flakes
ice which contains at least 70 % flaked ice (and no more than 30 % water) which is produced by a
continuous type ice maker3.3 Type of production
3.3.1
batch-type ice maker
ice maker that has alternate freezing and harvesting periods
3.3.1.1
batch-type single cubes ice maker
ice maker that produces single ice cubes
3.3.1.2
batch-type multiple cubes ice maker
ice maker that produces multiple ice cubes
3.3.2
continuous-type ice maker
ice maker that continually freezes and harvests ice flakes at the same time
3.3.3
modular-type ice maker
ice maker without storage means
3.3.4
self-contained ice maker
ice-maker in which the ice-making mechanism, storage compartment and condensing unit are
integrated within a cabinet3.4
ice storage bin
factory-made container (not necessarily shipped in one package with the ice-maker) that forms or is
intended to form a non-refrigerated compartment for the storage of iceNote 1 to entry: the container is equipped with additional devices (e.g. container support, carts, etc.).
3.5separate storage compartment
non-refrigerated compartment for the storage of ice that is separate from the ice-making mechanism
© ISO 2022 – All rights reserved---------------------- Page: 8 ----------------------
oSIST prEN ISO 6369:2022
ISO/DIS 6369:2022(E)
3.6
purge (also blow-down)
dissipation of a certain percentage of water to control the clarity of ice or to prevent scaling
3.7ice production
amount of ice harvested, stated in kg/24 h in multiples of 1 kg
3.8
energy consumption rate
total energy input stated in kWh/10 kg of ice in multiples of 0,1 kWh
3.9
potable water use rate
amount of potable water used in making ice, including purging and harvesting, stated in l/10 kg of ice
in multiples of 0,1 l3.10
cooling water use rate
amount of cooling water used in making ice, stated in l/10 kg of ice in multiples of 0,1 l
3.11standard rating
ratings based on tests performed at standard rating conditions
3.12
standard rating conditions
standard set of conditions under which the performance characteristics of ice makers are rated for
comparative purposes4 Measurement of energy consumption, water consumption and ice production
capacity
4.1 General
Unless otherwise specified, measurements shall be made under test conditions and with equipment
set-up as specified in 4.2 to 4.5 and Clause 5.4.2 Test room
The test room walls and ceilings shall be insulated to ensure that the temperature of both the inside
walls and the ceiling surface is within 2 °C of the ambient temperature.Fluorescent or LED lighting shall be used owing to its high light output, low surface temperature and
low heat load on the test room.The air flow shall be horizontal with a speed ≤0,25
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.