SIST EN ISO 22041:2019
(Main)Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO 22041:2019)
Refrigerated storage cabinets and counters for professional use - Performance and energy consumption (ISO 22041:2019)
This Standard specifies requirements for the verification of performance including energy consumption of refrigerated storage cabinets and counters for professional use in commercial kitchens, hospitals, canteens, preparation areas of bars, bakeries, gelateria, institutional catering and similar professional areas.
The products covered in this Standard are intended to store foodstuffs. It specifies test conditions and methods for checking that the requirements have been satisfied, as well as classification of the cabinets and counters, their marking and the list of their characteristics to be declared by the manufacturer.
Servicekühltheken- und -tische für den gewerblichen Gebrauch - Leistung und Energieaufnahme (ISO 22041:2019)
Dieses Dokument legt Anforderungen an die Überprüfung der Leistung und des Energieverbrauchs von professionellen Lagerkühlmöbeln und -theken für die Verwendung in gewerblichen Küchen, Kranken-häusern, Kantinen, Zubereitungsbereichen von Bars, Bäckereien, Eisdielen, Großküchen und ähnlichen gewerblichen Bereichen fest.
Die durch dieses Dokument abgedeckten Produkte sind für die Lagerung von Lebensmittelerzeugnissen vorgesehen. In diesem Dokument werden Prüfbedingungen und Verfahren zur Überprüfung der Erfüllung der Anforderungen festgelegt sowie eine Klassifizierung der Möbel und Theken vorgenommen; darüber hinaus werden deren Markierungen sowie eine Auflistung der durch den Hersteller anzugebenden Eigenschaften aufgeführt.
Es gilt nicht für:
- Kühlmöbel für den Direktverkauf von Lebensmittelerzeugnissen;
- Möbel, die neben ihrer Lagerfunktion auch eine Verarbeitungsfunktion ausführen (z. B. kühlende, erhitzende und befeuchtende Vorrichtungen in Bäckereien);
- Möbel mit einem wassergekühlten Verflüssiger;
- Geräte mit getrennt aufgestelltem Verflüssigungssatz;
- Geräte mit Tischen mit offenem Aufsatz und Saladetten für die Zubereitung und Lagerung von Lebensmittelerzeugnissen;
- Möbel, die eigens zur Lagerung besonderer Lebensmittelerzeugnisse vorgesehen sind (d. h. frisches Fleisch, frischer Fisch usw.) und die unter anderen Temperaturen, als den in Tabelle 1 angegebenen, arbeiten;
- Tiefkühltruhen;
- Geräte, die den Tag über für einen kurzzeitigen/diskontinuierlichen Normalbetrieb vorgesehen sind;
- Einbaumöbel;
- Containerregale;
- Durchreichemöbel;
- Speiseeis-Gefrierschränke.
Armoires et comptoirs frigorifiques de stockage destinés à un usage professionnel - Performances et consommation d'énergie (ISO 22041:2019)
La présente norme spécifie les exigences relatives à la vérification des performances et de la consommation d'énergie des armoires et comptoirs frigorifiques de stockage destinés à un usage professionnel dans les cuisines professionnelles, les hôpitaux, les cafétérias, les zones de préparation des bars, les boulangeries, les magasins de vente de glaces, la restauration collective et d'autres secteurs professionnels similaires.
La présente norme s'applique aux produits conçus pour stocker des denrées alimentaires. Elle spécifie les conditions et les méthodes d'essai permettant de vérifier que les exigences ont été respectées, ainsi que la classification des armoires et des comptoirs, leur marquage et la liste des caractéristiques à déclarer par le fabricant.
Elle ne s'applique pas:
— aux armoires frigorifiques utilisées pour la vente directe de denrées alimentaires;
— aux armoires utilisées pour la transformation alimentaire et pas uniquement pour la fonction de stockage (par exemple armoires de boulangerie assurant la réfrigération, le chauffage et l'humidification);
— aux armoires à condenseur refroidi à l'eau;
— aux appareils avec groupe de condensation séparé;
— aux appareils à plateau supérieur ouvert et saladettes pour la préparation ou le stockage de denrées alimentaires;
— aux armoires spécifiquement destinées au stockage de denrées alimentaires particulières (c'est-à-dire viande fraîche, poisson frais, etc.) fonctionnant à une température différente de celles spécifiées dans le Tableau 1;
— aux congélateurs bahuts;
— aux appareils conçus pour un fonctionnement normal de courte durée/intermittent pendant toute la journée;
— aux armoires encastrables;
— aux armoires à chariots;
— aux armoires traversantes;
— aux congélateurs pour crèmes glacées.
Hladilne omare in pulti za profesionalno uporabo - Zmogljivost in poraba energije (ISO 22041:2019)
Ta standard določa zahteve za preverjanje zmogljivosti, vključno s porabo energije, hladilnih omar in pultov za profesionalno rabo v komercialnih kuhinjah, bolnišnicah, menzah, pripravljalnih površinah v barih, pekarnah, prodajalnah sladoleda in gostinskih obratih ter podobne profesionalne površine.
Izdelki, ki jih ta standard zajema, so namenjeni shranjevanju živil. Določa preskusne pogoje in metode, na podlagi katerih se preverja skladnost s temi zahtevami, ter razvrščanje teh vitrin in pultov, njihovo označevanje in seznam njihovih lastnosti, ki jih mora navesti proizvajalec.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22041:2019
01-september-2019
Nadomešča:
SIST EN 16825:2016
SIST EN 16825:2016/A1:2019
Hladilne omare in pulti za profesionalno uporabo - Zmogljivost in poraba energije
(ISO 22041:2019)
Refrigerated storage cabinets and counters for professional use - Performance and
energy consumption (ISO 22041:2019)
Servicekühltheken- und -tische für den gewerblichen Gebrauch - Leistung und
Energieaufnahme (ISO 22041:2019)
Armoires et comptoirs frigorifiques de stockage destinés à un usage professionnel -
Performances et consommation d'énergie (ISO 22041:2019)
Ta slovenski standard je istoveten z: EN ISO 22041:2019
ICS:
27.015 Energijska učinkovitost. Energy efficiency. Energy
Ohranjanje energije na conservation in general
splošno
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
SIST EN ISO 22041:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22041:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 22041:2019
EN ISO 22041
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2019
EUROPÄISCHE NORM
ICS 97.130.20 Supersedes EN 16825:2016
English Version
Refrigerated storage cabinets and counters for
professional use - Performance and energy consumption
(ISO 22041:2019)
Armoires et comptoirs frigorifiques de stockage Servicekühltheken- und -tische für den gewerblichen
destinés à un usage professionnel - Performances et Gebrauch - Leistung und Energieaufnahme (ISO
consommation d'énergie (ISO 22041:2019) 22041:2019)
This European Standard was approved by CEN on 24 May 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22041:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22041:2019
EN ISO 22041:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22041:2019
EN ISO 22041:2019 (E)
European foreword
This document (EN ISO 22041:2019) has been prepared by Technical Committee ISO/TC 86
"Refrigeration and air-conditioning" in collaboration with Technical Committee CEN/TC 44
“Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy
Consumption” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2019, and conflicting national standards
shall be withdrawn at the latest by December 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 16825:2016.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22041:2019 has been approved by CEN as EN ISO 22041:2019 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22041:2019
---------------------- Page: 6 ----------------------
SIST EN ISO 22041:2019
INTERNATIONAL ISO
STANDARD 22041
First edition
2019-05
Refrigerated storage cabinets and
counters for professional use —
Performance and energy consumption
Armoires et comptoirs frigorifiques de stockage destinés à un usage
professionnel — Performances et consommation d'énergie
Reference number
ISO 22041:2019(E)
©
ISO 2019
---------------------- Page: 7 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Requirements . 5
4.1 Condensate drainage . 5
4.2 Operating characteristics . 5
4.2.1 Classification according to temperature . 5
4.2.2 Defrosting . 6
4.2.3 Electrical energy consumption . 6
5 Test conditions . 6
5.1 General . 6
5.2 Tests outside test room . 6
5.3 Tests inside test room . 6
5.3.1 General. 6
5.3.2 Test conditions. 7
5.3.3 Preparation of test cabinet .13
5.3.4 Temperature test .26
5.3.5 Electrical energy consumption test .27
6 Test procedures .28
6.1 Calculation of net volume .28
6.2 Load line and cabinet label marking durability .28
6.3 Tests outside test room — Linear dimensions, areas and volumes .29
6.4 Tests inside test room .29
6.4.1 Test conditions.29
6.4.2 Cabinet preparation .29
6.4.3 Temperature test .29
6.4.4 Electrical energy consumption test .30
7 Template for information to be declared .30
8 Load limit marking .30
Annex A (informative) Information and accessories to be provided by the manufacturer for
the performance and reproducibility of tests .32
Bibliography .33
© ISO 2019 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 86, Refrigeration and air-conditioning,
Subcommittee SC 7, Testing and rating of commercial refrigerated display cabinets.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 22041:2019
INTERNATIONAL STANDARD ISO 22041:2019(E)
Refrigerated storage cabinets and counters for
professional use — Performance and energy consumption
1 Scope
This document specifies requirements for the verification of performance and energy consumption
of refrigerated storage cabinets and counters for professional use in commercial kitchens,
hospitals, canteens, preparation areas of bars, bakeries, gelateria, institutional catering and similar
professional areas.
The products covered in this document are intended to store foodstuffs. It specifies test conditions and
methods for checking that the requirements have been satisfied, as well as classification of the cabinets
and counters, their marking and the list of their characteristics to be declared by the manufacturer.
It is not applicable to:
— refrigerated cabinets used in the direct sale of foodstuffs;
— cabinets that carry out food processing and not just storage function (e.g. bakery cabinets that chill,
heat and humidify);
— cabinets with water cooled condenser;
— appliances with remote condensing unit;
— appliances with open top tables and saladettes for preparation or storage of foodstuffs;
— cabinets specifically intended for storage of specific foodstuffs (i.e. fresh meat, fresh fish, etc.)
operating at a temperature different from those specified in Table 1;
— chest freezers;
— appliances intended for short time /intermittent normal operation during the full day;
— built-in cabinets;
— roll-in cabinets;
— pass-through cabinets;
— ice cream freezers.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at https: //www .electropedia .org/
— ISO Online browsing platform: available at https: //www .iso .org/obp
© ISO 2019 – All rights reserved 1
---------------------- Page: 11 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
3.1
refrigerated storage cabinet
cabinet cooled by an incorporated refrigerating system which enables chilled and frozen foodstuffs
placed therein to be maintained within prescribed temperature limits
Note 1 to entry: Refrigerated storage cabinets are supplied with:
— transparent door: door where the transparent part is more than 20 % of the surface of the door;
— solid door: door where the transparent part is less than 20 % of the surface of the door.
3.1.1
vertical cabinet
refrigerated storage cabinet (3.1), having overall height equal or higher than 1 050 mm with one or more
front doors or drawers accessing the same compartment
3.1.2
counter cabinet
refrigerated storage cabinet (3.1), having overall height lower than 1 050 mm, with one or more front
doors or drawers accessing the same compartment
3.1.3
roll-in cabinet
refrigerated cabinet intended to be loaded with trolleys with shelves and designed to be introduced as
such in the compartment
3.1.4
pass-through cabinet
refrigerated cabinet accessible from both sides
3.1.5
semi-professional or light duty cabinet
refrigerated cabinet for which the measurement of energy consumption and the capability of
maintaining temperature in the compartment are verified when tested at test room climate class 3
3.1.6
normal duty cabinet
refrigerated cabinet for which the measurement of energy consumption and the capability of
maintaining temperature in the compartment are verified when tested at test room climate class 4
3.1.7
heavy duty cabinet
refrigerated cabinet for which the verification of the capability of maintaining the temperature in the
compartment is performed when tested at test room climate class 5 and the measurement of energy
consumption is verified when tested at test room climate class 4
3.1.8
static air cabinet
cooling system without fan inside the cabinet, or system in which the fan can be switched off by the user
3.1.9
built-in cabinet
refrigerated storage cabinet (3.1) intended to be installed into a prepared recess in a wall or similar
location and requiring furniture finishing
3.1.10
refrigerator
appliance where the chilled foodstuff is stored at temperature corresponding to that of class M1
3.1.11
freezer
appliance where the frozen foodstuff is stored at temperature corresponding to that of class L1
2 © ISO 2019 – All rights reserved
---------------------- Page: 12 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
3.1.12
combined refrigerated cabinet
refrigerated cabinet with different temperatures for chilled and/or frozen foodstuffs in separate
compartments of the same cabinet
3.1.13
multi use refrigerated cabinet
refrigerated cabinet or separate compartment of the same cabinet that may be set at different
temperatures for chilled or frozen foodstuffs
3.1.14
ice cream freezer
horizontal closed refrigerated cabinet intended to store and/or display and sell pre-packed ice
cream where access by the consumer to the pre-packed ice cream is gained by opening a lid (solid or
transparent)
3.2
commercial kitchen
area in commercial premises where foodstuffs are processed and stored
Note 1 to entry: This area also includes counter area in a bar.
3.3
overall external dimensions
dimensions of the right parallelepiped bounded by the length, depth and height of the cabinet, including
its projecting accessories
3.4
net volume
volume containing foodstuffs within the load limit
3.5
shelf
surface, excluding the base deck, on which the goods are stored
3.6
shelf sham
device intended to limit the loading of a shelf surface
3.7
shelf area
area defined by the external dimensions of the shelf (3.5) or internal dimensions of the base of the drawer
Note 1 to entry: The shelf area used for the calculation of volume is different from the area loaded with packages
as given in 5.3.3.3.
Note 2 to entry: In case of shelves that are recessed into the cabinet walls the recess part is not considered for the
calculation of the surface area.
3.8
load limit
each part of the cabinet boundary surface consisting of a plane or several planes within which foodstuffs
can be loaded
3.9
load limit line
permanently marked boundary line denoting the limit of the loading surface
© ISO 2019 – All rights reserved 3
---------------------- Page: 13 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
3.10
operating conditions
conditions which exist when the cabinet, including all permanently located accessories, has been set up
with the recommendations of the manufacturer and is in service
Note 1 to entry: Specific operating conditions are defined in Clause 5.
3.11
defrosting
removal of frost, snow and ice from a refrigerated cabinet
3.11.1
automatic defrosting
defrosting (3.11) where no action is necessary by the user to initiate the removal of frost accumulation
and to restore normal operation
Note 1 to entry: It includes automatic removal of defrost water.
3.11.2
semi-automatic defrosting
defrosting (3.11) where an action is necessary by the user to initiate the removal of frost accumulation
and operating condition is restored automatically
Note 1 to entry: It either includes automatic removal of defrost water or entails manual removal of defrost water.
3.11.3
manual defrosting
defrosting (3.11) where an action is necessary by the user to initiate the removal of frost accumulation
and restoration to normal operation requires a further action by the user
Note 1 to entry: It either includes automatic removal of defrost water or entails manual removal of defrost water.
3.12
defrost water removal
process through which defrost water is removed from a refrigerated cabinet
3.12.1
automatic removal of defrost water
removal and/or evaporation of defrost water that does not require any action by the user
3.12.2
manual removal of defrost water
removal of defrost water that requires an action by the user
3.13
condensing unit
combination of one or more compressors, condensers and liquid receivers (when required) and common
accessories
3.14
compression-type refrigerating system
system in which refrigeration is effected by the vaporization at low pressure in a heat
exchanger(evaporator) of a liquid refrigerant, the vapour thus formed being restored to the liquid state
by mechanical compression to a higher pressure and subsequent cooling in another heat exchanger
(condenser)
3.15
indirect-type refrigerating system
system in which a secondary refrigerant circulating system is installed between a central refrigerating
system and a refrigerated cabinet
4 © ISO 2019 – All rights reserved
---------------------- Page: 14 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
3.16
frame heating
system to avoid condensation on the frame surface and freezing of the gasket of the refrigerated cabinet
3.17
energy consumption
E24h
energy consumption of the refrigerated cabinet in kWh
3.18
M-package
test package fitted with a temperature measuring sensor at its geometric centre
3.19
M-package temperature class
classification of M-package (3.18) temperature according to temperatures of M-packages during the
temperature test
3.20
climate class
classification of the test room climate according to the dry bulb temperature and relative humidity
3.21
drawer
retractable device for food storage, not located behind a door and accessible directly from the front of
the cabinet
3.22
cabinet section
vertical part of a cabinet compartment containing one or more doors or drawers (3.21) placed above
each other
4 Requirements
4.1 Condensate drainage
Where drains, drip trays or evaporation receptacles are fitted, they shall have a capacity such to avoid
overflow immediately during the testing period of 5.3.3.6.1 and whenever relevant (e.g. in case of
manual cleaning), specific instructions shall be given on how to access and clean them.
4.2 Operating characteristics
4.2.1 Classification according to temperature
The temperatures measured in the compartment(s) shall comply with the values specified in Table 1
and the tests shall be carried out as specified in 5.3.4.
Table 1 — M-package temperature classes
Highest temperature, θ , of Lowest temperature, θ , of Lowest temperature, θ , of
ah b al
warmest M-package less than coldest M-package greater warmest M-package less than
or equal to than or equal to or equal to
Class
(see Figure 11) (see Figure 11) (see Figure 11)
°C
L1 −15 — −18
M1 +5 −1 —
© ISO 2019 – All rights reserved 5
---------------------- Page: 15 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
4.2.2 Defrosting
The proposed defrosting procedures (automatic or manual) shall not affect the temperature
requirements (see 5.3.4).
4.2.3 Electrical energy consumption
The electrical energy consumption (E24h) shall be measured over a 24 h period according to the
conditions and the test methods specified in 5.3.5.
The energy consumption shall be expressed in kWh/24 h rounded to two decimal places.
5 Test conditions
5.1 General
When the characteristics of a cabinet are to be verified, all the tests and inspections shall be applied to
one and the same cabinet. These tests and inspections may also be made individually for the study of a
particular characteristic.
Compartment(s) of a combined refrigerated cabinet that are not foreseen for storage of foodstuffs are
not subjected to tests and verifications of this document.
Table 2 lists the tests and verifications.
Table 2 — Test summary
Tests and inspections Test method Test room
Temperature 5.3.4
Inside test room
Defrosting 4.2.2
(see 5.3)
Electrical energy consumption 5.3.5
Outside test room
Calculation of net volume 6.1
(see 5.2)
5.2 Tests outside test room
The tests which may be carried out outside the test room deal with the verification of physical
dimensions, linear dimensions, areas and volumes.
Measurements shall be made with the cabinet not in operation but situated in a place where the
temperature is maintained between 16 °C and 30 °C.
If the cabinet includes permanent jacks, rollers, feet or other components for adjustment of height, they
are considered in the measurement of the height of the cabinet. The height for the counter shall not
include the work top.
5.3 Tests inside test room
5.3.1 General
The tests which are carried out inside the test room deal with the measurement of the following
characteristics:
— temperature and defrosting;
— electrical energy consumption.
6 © ISO 2019 – All rights reserved
---------------------- Page: 16 ----------------------
SIST EN ISO 22041:2019
ISO 22041:2019(E)
5.3.2 Test conditions
5.3.2.1 General
In the following, general testing conditions which are common for all tests specified in Clause 6 carried
out inside the test room are defined. These conditions concern the test room, the test and M-packages,
and the measuring instruments.
5.3.2.2 Test room — General design, walls, floor and radiant heat
The test room shall be a parallelepiped space. The walls of the room shall be thermally insulated.
The minimum dimensions of the test room shall be such as to allow at least 0,5 m above the top of the
cabinet, 1 m on the side of the climate measuring point, 0,5 m on the opposite side and 1,5 m on the
front of the cabinet with doors in closed position (see Figure 4).
A minimum insulation level equivalent to 60 mm of rigid polyurethane foam (λ = 0,03 W/m °C) should
be used for the building of the test room.
The floor shall be made of concrete or of thermally equivalent material and/or shall be sufficiently
insulated to ensure that external climatic conditions do not affect the floor temperature.
Lighting shall be installed to maintain (600 ± 100) lx measured at a height of 1 m above the floor level
and shall be lit continuously during the test period.
The walls, ceilings and any partitions of rooms intended for the testing of refrigerated cabinets shall
have an emissivity between 0,9 and 1 at 25 °C.
5.3.2.3 Test room climate definition
5.3.2.3.1 Test room climate classes
Tests shall be carried out in one of the climate classes according to Table 3.
During the test, the test room shall be capable of maintaining values of temperature and humidity
within ±1 °C of the temperature and ±5 units of the relative humidity percentage figures at the specified
climate measuring point(s).
Table 3 — Climate classes
Test room Dry bulb Relative Dew point Water vapour
climate class temperature humidity mass in dry air
°C % °C g/kg
3 25 60 16,7 12,0
4 30 55 20,0 14,8
5 40 40 23,9 18,8
NOTE The water vapour mass in dry air is one of the main points influencing the performance and the energy consumption
of the cabinets.
5.3.2.3.2 Climate measuring point
The climate measuring point shall be located in the test room air flow, 500 mm upstr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.