SIST EN IEC 61784-2-19:2023
(Main)Industrial networks - Profiles - Part 2-19: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
Industrial networks - Profiles - Part 2-19: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
This document defines extensions of Communication Profile Family 19 (CPF 19) for Real-Time Ethernet (RTE). CPF 19 specifies a Real-Time Ethernet (RTE) communication profile (CP) and related network components based on the IEC 61158 series (Type 27), ISO/IEC/IEEE 8802-3 and other standards.
For each RTE communication profile, this document also specifies the relevant RTE performance indicators and the dependencies between these RTE performance indicators.
NOTE 1 All CPs are based on standards or draft standards or International Standards published by the IEC or from standards or International Standards established by other standards bodies or open standards processes.
NOTE 2 The RTE communication profile uses ISO/IEC/IEEE 8802-3 communication networks and its related network components and may in some cases amend those standards to obtain RTE features.
NOTE 3 Some CPs of CPF 19 are specified in IEC 61784-1-19.
Industrielle Kommunikationsnetze - Profile - Teil 2-19: Zusätzliche Echtzeit-Feldbusprofile basierend auf ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
Réseaux industriels - Profils - Partie 2-19: Profils de bus de terrain supplémentaires pour les réseaux en temps réel fondés sur l'ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
L’IEC 61784-2-19:2023 définit les extensions de la famille de profils de communication 19 (CPF 19) pour Ethernet en temps réel (RTE). La CPF 19 spécifie un profil de communication (CP) Ethernet en temps réel (RTE, Real-Time Ethernet) et des composants de réseau associés basés sur la série IEC 61158 (Type 27), l’ISO/IEC/IEEE 8802-3 et d’autres normes.
Industrijska omrežja - Profili - 2-19. del: Dodatni profili procesnih vodil v realnem času po ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
Ta dokument določa razširitve družine komunikacijskih profilov 19 (CPF 19) za Real-Time Ethernet (RTE). Družina komunikacijskih profilov 19 določa komunikacijski profil (CP) Real-Time Ethernet (RTE) in povezane omrežne komponente na osnovi skupine standardov IEC 61158 (tip 27), standarda ISO/IEC/IEEE 8802-3 in drugih standardov.
Za vsak komunikacijski profil RTE ta dokument določa tudi povezane kazalnike uspešnosti RTE in odvisnosti med temi kazalniki uspešnosti RTE.
OPOMBA 1: Vsi komunikacijski profili temeljijo na standardih ali osnutkih standardov ali mednarodnih standardih, ki jih je objavila komisija IEC, oziroma na standardih ali mednarodnih standardih, ki so jih določili drugi organi za standarde ali procesi odprtih standardov.
OPOMBA 2: Komunikacijski profil RTE uporablja komunikacijska omrežja v skladu s standardom ISO/IEC 8802-3 maj in z njimi povezane omrežne komponente ter lahko v nekaterih primerih za pridobitev funkcij RTE te standarde spremeni.
OPOMBA 3: Nekateri komunikacijski profili iz družine komunikacijskih profilov 19 so določeni v standardu IEC 61784-1-19.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 61784-2-19:2023
01-november-2023
Industrijska omrežja - Profili - 2-19. del: Dodatni profili procesnih vodil v realnem
času po ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
Industrial networks - Profiles - Part 2-19: Additional real-time fieldbus profiles based on
ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
Industrielle Kommunikationsnetze - Profile - Teil 2-19: Zusätzliche Echtzeit-
Feldbusprofile basierend auf ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-19:2023)
Réseaux industriels - Profils - Partie 2-19: Profils de bus de terrain supplémentaires pour
les réseaux en temps réel fondés sur l'ISO/IEC/IEEE 8802-3 - CPF 19 (IEC 61784-2-
19:2023)
Ta slovenski standard je istoveten z: EN IEC 61784-2-19:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.05 Večslojne uporabniške Multilayer applications
rešitve
SIST EN IEC 61784-2-19:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 61784-2-19:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 61784-2-19:2023
EUROPEAN STANDARD EN IEC 61784-2-19
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2023
ICS 33.020 Supersedes EN IEC 61784-2:2019 (partially)
English Version
Industrial networks - Profiles - Part 2-19: Additional real-time
fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 19
(IEC 61784-2-19:2023)
Réseaux industriels - Profils - Partie 2-19: Profils de bus de Industrielle Kommunikationsnetze - Profile - Teil 2-19:
terrain supplémentaires pour les réseaux en temps réel Zusätzliche Echtzeit-Feldbusprofile basierend auf
fondés sur l'ISO/IEC/IEEE 8802-3 - CPF 19 ISO/IEC/IEEE 8802-3 - CPF 19
(IEC 61784-2-19:2023) (IEC 61784-2-19:2023)
This European Standard was approved by CENELEC on 2023-04-11. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61784-2-19:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61784-2-19:2023
EN IEC 61784-2-19:2023 (E)
European foreword
The text of document 65C/1210/FDIS, future edition 1 of IEC 61784-2-19, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61784-2-
19:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-01-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-04-11
document have to be withdrawn
This document, together with other parts of the same series, partially supersedes EN IEC 61784-
2:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61784-2-19:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 61158-1 NO
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.