SIST EN 1014-2:2011

Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis

This European Standard specifies a procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis.

Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 2: Verfahren zur Probenahme von Kreosot aus imprägniertem Holz für die nachfolgende Analyse

Dieser Teil der EN 1014 legt ein Verfahren fest, eine Probe Kreosot (Teerimprägnieröl) aus imprägniertem Holz zur nachfolgenden Analyse zu erhalten.

Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 2 : Procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieure

La présente norme européenne spécifie une procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieure.

Zaščitna sredstva za les - Kreozotno olje in s kreozotnim oljem zaščiten les - Metode vzorčenja in analize - 2. del: Postopek vzorčenja kreozotnega olja iz lesa, zaščitenega s kreozotnim oljem, za nadaljnjo analizo

Ta evropski standard določa postopek vzorčenja kreozotnega olja iz lesa za nadaljnjo analizo.

General Information

• Status: Published
• Public Enquiry End Date: 30-Jan-2009
• Publication Date: 02-Feb-2011
• ICS: 71.100.50 - Wood-protecting chemicals
• Technical Committee: LLZ - Les, lesni izdelki in zaščita lesa
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 29-Jun-2010
• Due Date: 03-Sep-2010
• Completion Date: 03-Feb-2011
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 1014-2:2010 - Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis

Relations

• Replaces: SIST EN 1014-2:2004 - Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
• Effective Date: 01-Oct-2010

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 2: Verfahren zur Probenahme von Kreosot aus imprägniertem Holz für die nachfolgende AnalyseProduits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse - Partie 2 : Procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieureWood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis71.100.50Wood-protecting chemicalsICS:Ta slovenski standard je istoveten z:EN 1014-2:2010SIST EN 1014-2:2011en,fr,de01-marec-2011SIST EN 1014-2:2011SLOVENSKI
STANDARDSIST EN 1014-2:20041DGRPHãþD



SIST EN 1014-2:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1014-2
June 2010 ICS 71.100.50 Supersedes EN 1014-2:1995English Version
Wood preservatives - Creosote and creosoted timber - Methods of sampling and analysis - Part 2: Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
Produits de préservation du bois - Créosote et bois créosoté - Méthodes d'échantillonnage et d'analyse -Partie 2: Procédure pour obtenir un échantillon de créosote du bois créosoté à soumettre à une analyse ultérieure
Holzschutzmittel - Kreosot (Teerimprägnieröl) und damit imprägniertes Holz - Probenahme und Analyse - Teil 2: Verfahren zur Probenahme von Kreosot aus imprägniertem Holz für die nachfolgende Analyse This European Standard was approved by CEN on 12 May 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1014-2:2010: ESIST EN 1014-2:2011



EN 1014-2:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Sampling .44.1General .44.2Sampling procedure .44.3Amount of sample.45Reagent .56Apparatus .57Procedure for the extraction of creosote from the sample of the creosoted timber .78Sampling report .7Bibliography .8 SIST EN 1014-2:2011



EN 1014-2:2010 (E) 3 Foreword This document (EN 1014-2:2010) has been prepared by Technical Committee CEN/TC 38 “Durability of wood and wood-based products”, the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national standards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1014-2:1995. This standard forms part of a series of standards relating to the sampling and analysis of creosote and creosoted timber. The other standards of the series are: EN 1014-1, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 1: Procedure for sampling creosote EN 1014-3, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 3: Determination of the benzo(a)pyrene content of creosote EN 1014-4, Wood preservatives
Creosote and creosoted timber
Methods of sampling and analysis
Part 4: Determination of the water-extractable phenols content of creosote According to the CEN/CENELEC Internal Regulations, the
...