oSIST prEN ISO 8233:2020

Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2020)

Armaturen aus Thermoplasten - Drehmoment - Prüfverfahren (ISO/DIS 8233:2020)

Diese Internationale Norm legt ein Prüfverfahren zur Bestimmung des Drehmoments zum Öffnen und Schließen von Armaturen aus Thermoplasten fest.
Diese Internationale Norm ist auf alle Typen von Armaturen aus Thermoplasten anwendbar, die für den Transport von Flüssigkeiten nach ISO 16135, ISO 16136, ISO 16138, ISO 16139, ISO 21787 vorgesehen sind.
Die Beziehung zwischen dem Drehmoment und dessen möglicher Erhöhung nach längerem Gebrauch der Armatur bei bestimmten Arbeitsbedingungen oder Materialverschleiß/chemischer Aggression ist nicht festgelegt.
ANMERKUNG Bezüglich der chemischen Aggression der Materialien ist in ISO/TR 10358 [1] eine Sammlung von Daten über die Dauerprüfung angegeben, die erforderlich ist, um die Fähigkeit handbetätigter Armaturen aus Thermoplasten zu bestätigen, einem längeren Gebrauch bei wiederholtem Öffnen und Schließen standzuhalten; Informationen sind in ISO 8659 [2] angegeben.

Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d’essai (ISO/DIS 8233:2020)

Plastomerni ventili - Vrtilni moment - Preskusna metoda (ISO/DIS 8233:2020)

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Oct-2020
• ICS: 23.060.01 - Valves in general
• ICS: 83.140.30 - Plastics pipes and fittings for non fluid use
• Technical Committee: IHPV - Hydraulics and pneumatics
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 14-May-2024
• Due Date: 19-May-2024
• Completion Date: 14-May-2024
• Ref Project: FprEN ISO 8233 - Thermoplastics valves - Torque - Test method (ISO/FDIS 8233:2021)

Relations

• Revised: SIST EN 28233:1997 - Thermoplastics valves - Torque - Test method (ISO 8233:1988)
• Effective Date: 19-Jan-2023
• Revised: SIST EN 28233:1997 - Thermoplastics valves - Torque - Test method (ISO 8233:1988)
• Effective Date: 18-Jan-2023
• Revised: SIST EN ISO 18233:2006 - Acoustics - Application of new measurement methods in building and room acoustics (ISO 18233:2006)
• Effective Date: 01-Oct-2020
• Revised: SIST EN 28233:1997 - Thermoplastics valves - Torque - Test method (ISO 8233:1988)
• Effective Date: 01-Oct-2020

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 8233:2020
01-oktober-2020
Plastomerni ventili - Vrtilni moment - Preskusna metoda (ISO/DIS 8233:2020)
Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2020)
Armaturen aus Thermoplasten - Drehmoment - Prüfverfahren (ISO/DIS 8233:2020)
Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d’essai
(ISO/DIS 8233:2020)
Ta slovenski standard je istoveten z: prEN ISO 8233
ICS:
23.060.01 Ventili na splošno Valves in general
83.140.30 Polimerne cevi in fitingi za Plastics pipes and fittings for
snovi, ki niso tekočine non fluid use
oSIST prEN ISO 8233:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 8233:2020

---------------------- Page: 2 ----------------------
oSIST prEN ISO 8233:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 8233
ISO/TC 138/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:
2020-08-17 2020-11-09
Thermoplastics valves — Torque — Test method
Robinets en matériaux thermoplastiques — Couple de manoeuvre — Méthode d'essai
ICS: 83.140.30; 23.060.01
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 8233:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

---------------------- Page: 3 ----------------------
oSIST prEN ISO 8233:2020
ISO/DIS 8233:2020(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 8233:2020
ISO/DIS 8233:2020(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test specimen . 2
5 Test condition . 2
6 Apparatus . 3
7 Procedure for torque test . 3
8 Test report .
...