SIST EN 14845-2:2006
(Main)Test methods for fibres in concrete - Part 2: Effect on concrete
Test methods for fibres in concrete - Part 2: Effect on concrete
This European Standard specifies a method for determining the effect of fibres, steel or polymer, on the residual flexural strength of a reference concrete.
Prüfverfahren für Fasern in Beton - Teil 2: Einfluss auf den Beton
Diese Europäische Norm legt ein Verfahren zur Bestimmung des Volumens an Fasern fest, welches einem Referenzbeton beigemengt werden muss, um eine bestimmte Restzugfestigkeit zu erzielen.
Méthodes d'essai des fibres du béton - Partie 2: Effets sur le béton
Metode za preskušanje vlaken v betonu - 2. del: Vpliv na beton
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Test methods for fibres in concrete - Part 2: Effect on concreteMetode za preskušanje vlaken v betonu - 2. del: Vpliv na betonMéthodes d'essai des fibres du béton - Partie 2: Effets sur le bétonPrüfverfahren für Fasern in Beton - Teil 2: Einfluss auf den BetonTa slovenski standard je istoveten z:EN 14845-2:2006SIST EN 14845-2:2006en91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:SLOVENSKI
STANDARDSIST EN 14845-2:200601-december-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14845-2August 2006ICS 91.100.30 English VersionTest methods for fibres in concrete - Part 2: Effect on concreteMéthodes d'essai des fibres du béton - Partie 2: Influencesur la résistancePrüfverfahren für Fasern in Beton - Teil 2: Einfluss auf denBetonThis European Standard was approved by CEN on 26 June 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14845-2:2006: E
EN 14845-2:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Test method.4 5 Procedure.4 6 Report.5
EN 14845-2:2006 (E) 3 Foreword This document (EN 14845-2:2006) has been prepared by Technical Committee CEN/TC 104 “Concrete and related products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2007, and conflicting national standards shall be withdrawn at the latest by May 2008. This document has been drafted by working group 11 “Fibres for concrete”, the Secretariat of which is held by BSI. This European Standard is one of a series dealing with test methods for assessing the performance of Fibres, either steel or polymer, in concrete.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to im
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.