SIST EN ISO 81714-1:2003
(Main)Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999)
Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules (ISO 81714-1:1999)
Migrated from Progress Sheet (TC Comment) (2000-07-10): Transferred from WI CSI03037 (P. Pieters 97-03)
Gestaltung von graphischen Symbolen für die Anwendung in der technischen Produktdokumentation - Teil 1: Grundregeln (ISO 81714-1:1999)
Dieser Teil der ISO 81714 legt unter Berücksichtigung von generellen Anwendungsanforderungen die Grundlagen für das Entwickeln und Gestalten von graphischen Symbolen fest, die in der technischen Dokumentation von Produkten angewendet werden.
Création de symboles graphiques a utiliser dans la documentation technique de produits - Partie 1: Regles fondamentales (ISO 81714-1:1999)
Načrtovanje grafičnih simbolov za uporabo v tehnični dokumentaciji izdelkov – 1. del: Osnovna pravila (ISO 81714-1:1999)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 81714-1:2003
01-november-2003
1DþUWRYDQMHJUDILþQLKVLPERORY]DXSRUDERYWHKQLþQLGRNXPHQWDFLMLL]GHONRY±
GHO 2VQRYQDSUDYLOD ,62
Design of graphical symbols for use in the technical documentation of products - Part 1:
Basic rules (ISO 81714-1:1999)
Gestaltung von graphischen Symbolen für die Anwendung in der technischen
Produktdokumentation - Teil 1: Grundregeln (ISO 81714-1:1999)
Création de symboles graphiques a utiliser dans la documentation technique de produits
- Partie 1: Regles fondamentales (ISO 81714-1:1999)
Ta slovenski standard je istoveten z: EN ISO 81714-1:1999
ICS:
01.080.01 *UDILþQLVLPEROLQDVSORãQR Graphical symbols in general
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
SIST EN ISO 81714-1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 81714-1:2003
---------------------- Page: 2 ----------------------
SIST EN ISO 81714-1:2003
---------------------- Page: 3 ----------------------
SIST EN ISO 81714-1:2003
---------------------- Page: 4 ----------------------
SIST EN ISO 81714-1:2003
---------------------- Page: 5 ----------------------
SIST EN ISO 81714-1:2003
---------------------- Page: 6 ----------------------
SIST EN ISO 81714-1:2003
INTERNATIONAL ISO
STANDARD 81714-1
First edition
1999-12-15
Design of graphical symbols for use in
the technical documentation of products —
Part 1:
Basic rules
Création de symboles graphiques à utiliser dans la documentation
technique de produits —
Partie 1: Règles fondamentales
Reference number
ISO 81714-1:1999(E)
©
ISO 1999
---------------------- Page: 7 ----------------------
SIST EN ISO 81714-1:2003
ISO 81714-1:1999(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading
this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in
this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 734 10 79
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 1999 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 81714-1:2003
ISO 81714-1:1999(E)
Contents Page
Foreword . v
1 Scope . 1
2 Normative references . 1
3 Definitions . 1
4 Markers . 2
5 Design of graphical symbols. 2
5.1 Graphic representation . 2
5.2 Design procedure . 2
6 Design principles. 3
6.1 Shape . 3
6.2 Operational state . 3
6.3 Classes of graphical symbols . 3
6.4 Combination of graphical symbols. 4
6.4.1 General . 4
6.4.2 Graphical symbols for complex assemblies. 4
6.4.3 Graphical symbols including flow direction. 5
6.5 Grid; module . 5
6.6 Line width. 6
6.7 Arcs and lines . 6
6.8 Minimum space between parallel lines. 7
6.9 Hatched and filled areas . 7
6.10 Connect node. 7
6.11 Position of a connect node. 7
6.12 Terminal line. 7
6.13 Reference point. 7
6.14 Text assigned to graphical symbols. 8
6.14.1 Typeface of characters. 8
© ISO 1999 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 81714-1:2003
ISO 81714-1:1999(E)
6.14.2 Set of characters.8
6.14.3 Text orientation.8
6.14.4 Location of text inside an outline.8
6.14.5 Minimum distances.8
6.15 Size of graphical symbols.9
7 Modification of proportions.9
8 Variants of graphical symbols.9
Annex A (informative) Bibliography .12
iv © ISO 1999 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 81714-1:2003
ISO 81714-1:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 81714-1 was prepared jointly by Technical Committees ISO/TC 10,
Technical drawings,
product definition and related documentation, ISO/TC 145, Graphical symbols, and IEC/TC 3, Documentation and
. Formal voting has taken place within both ISO and IEC.
graphical symbols
This first edition of ISO 81714-1 cancels and replaces ISO/IEC 11714-1:1996, which has been updated. It serves as
the basis for the design of graphical symbols in all fields of the technical documentation of products. Applications of
this part of ISO 81714 are, for example, future editions of IEC 60617 and ISO 14617.
In order to collect all requirements concerning relevant graphical symbols within one single numerical series,
ISO/TC 10 and IEC/TC 3, in conjunction with ISO/TC 145, agreed to publish all parts of this International Standard
within the 81714 series.
The Technical Management Board of ISO and the Committee of Action of IEC have decided that for each part of
this series, one organization shall be chosen responsible. The Technical Committees involved have agreed not to
change any part of International Standard 81714 without mutual agreement.
International Standard 81714 consists of the following parts, under the general title Design of graphical symbols for
use in the technical documentation of products:
ISO 81714-1 — Part 1: Basic rules
IEC 81714-2 —
Part 2: Specification for graphical symbols in a computer sensible form including graphical symbols
for a reference library, and requirements for their interchange
IEC 81714-3 —
Part 3: Classification of connect nodes, networks and their encoding
Further parts specific to individual subject field requirements are under consideration.
© ISO 1999 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 81714-1:2003
---------------------- Page: 12 ----------------------
SIST EN ISO 81714-1:2003
INTERNATIONAL STANDARD © ISO ISO 81714-1:1999(E)
Design of graphical symbols for use in the technical
documentation of products —
Part 1:
Basic rules
1 Scope
This part of ISO 81714 specifies basic rules for the design of graphical symbols for use in the technical
documentation of products taking into account basic application needs.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part of
ISO 81714. At the time of publication, the editions indicated were valid. All normative documents are subject to
revision, and parties to agreements based on this part of ISO 81714 are encouraged to investigate the possibility of
applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of
currently valid International Standards.
ISO 31–11:1992, Quantities and units - Part 11: Mathematical signs and symbols for use in the physical sciences
and technology.
ISO 129: 1985, Technical drawings - Dimensioning - General principles, definitions, methods of execution and
special indications.
ISO 6428 :1982, Technical drawings - Requirements for microcopying.
ISO/IEC 8859 (all parts), Information processing - 8-bit single-byte coded graphic character sets.
ISO/IEC 10367:1991, Information technology - Standardized coded graphic character sets for use in 8-bit codes.
ISO/IEC 10646–1:1993, Information technology - Universal Multiple-Octet Coded Character Set (UCS) - Part 1:
Architecture and Basic Multilingual Plane.
IEC 61286: 1995, Information technology - Coded graphic character set for use in the preparation of documents
used in electrotechnology and for information interchange.
3 Definitions
For the purposes of this part of ISO 81714, the following definitions apply.
3.1 graphical symbol
visually perceptible figure used to transmit information independently of language
NOTES —
1 The graphical symbol may represent objects of interest, such as products, functions or requirements for manufacturing, quality
control etc.
2 This is not to be confused with the simplified representation of products which is always drawn to scale and may look like a
graphical symbol.
© ISO 1999 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST EN ISO 81714-1:2003
ISO 81714-1:1999(E)
3.2 reference point
origin of the coordinate system used in the description of all the graphical elements of the graphical symbol
NOTE - The reference point may be used for positioning and transformation, e. g. mirroring, turning, moving.
3.3 symbol family
set of graphical symbols with a common conception using graphical characteristics with specific meanings
3.4 connect node
location on a graphical symbol intended for connection
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.