SIST EN 16657:2016
(Main)Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks
This European Standard specifies the minimum performance and construction requirements for overfill prevention controllers located on the tank vehicle.
This European Standard applies to overfill prevention controllers for liquid fuels, having a flash point up to but not exceeding 100 °C.
The requirements apply to overfill prevention controllers suitable for use at ambient temperatures in the range from 25 °C to +60 °C, and subject to normal operational pressure variations.
Tanks für die Beförderung gefährlicher Güter - Transporttankausrüstung für Überfüllsicherungen für ortsfeste Tanks
Diese Europäische Norm legt die Mindestanforderungen an Leistung und Bauweise von an Tankfahrzeugen angebrachten Steuereinrichtungen für Überfüllsicherungen fest.
Diese Europäische Norm gilt für Steuereinrichtungen von Überfüllsicherungen für flüssige Brenn- und Kraftstoffe mit einem Flammpunkt bis einschließlich 100 °C.
Die Anforderungen gelten für Steuereinrichtungen von Überfüllsicherungen, die für die Verwendung innerhalb eines Umgebungstemperaturbereichs von 25 °C bis 60 °C sowie die Einwirkung normaler Schwankungen des Betriebsdrucks geeignet sind.
Citernes destinées au transport de matières dangereuses - Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhicules-citernes
La présente norme spécifie les prescriptions minimales de performance et de construction applicables aux contrôleurs limiteurs de remplissage installés sur le véhicule-citerne.
La présente norme s'applique aux contrôleurs limiteurs de remplissage pour carburants pétroliers liquides ayant un point d'éclair inférieur ou égal à 100 °C.
Les prescriptions s'appliquent aux contrôleurs limiteurs de remplissage fonctionnant à des températures ambiantes comprises entre – 25 °C et + 60 °C et soumis à des variations de pression normales de fonctionnement.
Cisterne za prevoz nevarnega blaga - Oprema cistern za preprečitev prepolnitve za nepremične rezervoarje
Ta evropski standard določa minimalne zahteve glede zmogljivosti in konstrukcije za nadzorne naprave za preprečitev prepolnitve na cestni cisterni.
Ta evropski standard se uporablja za nadzorne naprave za preprečitev prepolnitve za tekoča goriva s plameniščem do največ 100 °C.
Zahteve veljajo za nadzorne naprave za preprečitev prepolnitve, ki so primerne za uporabo pri temperaturah okolja v razponu od 25 °C do +60 °C in so izpostavljene običajnim spremembam delovnega tlaka.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Transporttankausrüstung für Überfüllsicherungen für ortsfeste TanksCiternes destinées au transport de matières dangereuses - Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhicules-citernesTanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 16657:2016SIST EN 16657:2016en,fr,de01-oktober-2016SIST EN 16657:2016SLOVENSKI
STANDARDSIST EN 13616:2004/AC:2006SIST EN 13616:20041DGRPHãþD
SIST EN 16657:2016
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16657
June
t r s x ICS
s uä u r râ
t uä r t rä t r Supersedes EN
s u x s xã t r r vEnglish Version
Tanks for the transport of dangerous goods æ Transport tank equipment for overfill prevention devices for static tanks Citernes destinées au transport de matières dangereuses æ Dispositifs limiteurs de remplissage pour réservoirs statiques à bord de véhiculesæciternes Tanks für die Beförderung gefährlicher Güter æ Transporttankausrüstung für Überfüllsicherungen für ortsfeste Tanks This European Standard was approved by CEN on
x June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x x w yã t r s x ESIST EN 16657:2016
EN 16657:2016 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Normative references . 5 3 Terms, definitions and abbreviated terms . 5 3.1 Terms and definitions . 5 3.2 Abbreviated terms . 6 4 Requirements . 6 4.1 Effectiveness . 6 4.2 Construction . 6 5 Overfill prevention device . 6 5.1 Equipment on the tank . 6 5.2 Equipment on the tank vehicle. 6 5.3 EMC requirements . 6 5.4 Working characteristics . 7 5.4.1 General . 7 5.4.2 Response time . 7 5.4.3 Current interface . 7 5.4.4 Operating conditions . 9 5.4.5 Current interface – Auxiliary contact . 10 5.4.6 Binary/Digital Interface . 11 6 Test . 11 6.1 Type test . 11 6.1.1 General . 11 6.1.2 Performance tests – controller . 12 6.1.3 Fail-safe test . 13 6.1.4 EMC test . 13 6.2 Manufacturers production test . 13 6.2.1 General . 13 6.2.2 Controller response. 14 6.2.3 Current interface . 14 6.3 Binary/Digital interface. 15 6.3.1 General . 15 6.3.2 Sensor and digital interface . 15 6.3.3 PRD . 15 7 Marking . 15
SIST EN 16657:2016
EN 16657:2016 (E) 3 European foreword This document (EN 16657:2016) has been prepared by Technical Committee CEN/TC 296 “Tanks for the transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2016 and conflicting national standards shall be withdrawn at the latest by 2017-07-11. This document, together with EN 13616-1 and EN 13616-2, supersedes EN 13616:2004. With reference to EN 13616:2004, the following significant changes have been made: — splitting of EN 13616:2004; the new EN 13616, under the general title Overfill prevention devices for static tanks for liquid fuels — Requirements and test/assessment methods, will consist of the following parts: — Part 1: Overfill prevention devices with closure device; — Part 2: Overfill prevention devices without closure device. — reference to EN 14116; — explosion-technical parameters updated; — the requirements for the equipment of the overfill prevention devices without closure device on the static tank are fixed in EN 13616-2; — the requirements for the equipment of the overfill prevention devices without closure device on the tank vehicle are fixed in EN 16657. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16657:2016
EN 16657:2016 (E) 4 Introduction The European Committee for Standardization (CEN) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning hose communication methods given in 5.4.6. CEN takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured CEN that he/she is willing to negotiate licences either free of charge or under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with CEN. Information may be obtained from: FMC Technologies/F.A. Sening GmbH Regentstrasse 1 D-25474 Ellerbek Germany Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. CEN shall not be held responsible for identifying any or all such patent rights. CEN and CENELEC (http://www.cencenelec.eu/ipr/Pages/default.aspx) maintain online lists of patents relevant to their standards. Users are encouraged to consult the lists for the most up to date information concerning patents. SIST EN 16657:2016
EN 16657:2016 (E) 5 1 Scope This European Standard specifies the minimum performance and construction requirements for overfill prevention controllers located on the tank vehicle. This European Standard applies to overfill prevention controllers for liquid fuels, having a flash point up to but not exceeding 100 °C. The requirements apply to overfill prevention controllers suitable for use at ambient temperatures in the range from -25 °C to +60 °C, and subject to normal operational pressure variations. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13616-2:2016, Overfill prevention devices for static tanks for liquid fuels — Part 2: Overfill prevention devices without a closure device EN 14116, Tanks for transport of dangerous goods — Digital interface for the product recognition devices for liquid fuels EN 60079-0, Explosive atmospheres — Part 0: Equipment — General requirements (IEC 60079-0, modified) EN 60079-11, Explosive atmospheres — Part 11: Equipment protection by intrinsic safety "i" (IEC 60079-11) EN 61000-6-1, Electromagnetic compatibility (EMC) — Part 6-1: Generic standards — Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1)
EN 61000-6-3, Electromagnetic compatibility (EMC) — Part 6-3: Generic standards — Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3) EN ISO 13849-1, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1) ISO 7637-2, Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only 3 Terms, definitions and abbreviated terms For the purposes of this document, the terms, definitions and abbreviated terms given in EN 13616-2 and the following apply. 3.1 Terms and definitions 3.1.1 overfill prevention controller controller installed on the tank vehicle, connects to sensors mounted in or on the tank, and provides an output SIST EN 16657:2016
EN 16657:2016 (E) 6 3.2 Abbreviated terms PRD Product Recognition Device 4 Requirements 4.1 Effectiveness The filling process shall not start or shall automatically stop in the event of failure of the power supply. Detection of a sensor´s signal "non-permissive" shall result in a shut-down of the product flow by the controller. Stopping the product flow shall not generate pressure in excess of the designed criteria for the whole system. 4.2 Construction The design shall be compatible with the ambient temperature range of -25 °C to +60 °C. The manufacturer shall co
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.