oSIST prEN 1991-3:2024

Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machines

(1) EN 1991-3 defines actions imposed by cranes and other machines including dynamic effects, if
relevant, for the structural design of crane or machine supporting structures.
(2) EN 1991-3 provides guidance on crane classification in terms of dynamic factors and fatigue actions.
(3) EN 1991-3 applies to supporting structures of
− bridge, gantry and wall cranes travelling on fixed runways;
− fixed machines that cause a harmonic dynamic loading on fixed supporting structures.
(4) The principles provided in EN 1991-3 can be applied also to determine actions on supporting
structures of cranes other than those referred to in (3).
(5) EN 1991-3 does not provide partial factors for actions.
NOTE For partial factors for actions, see Annex A.5 to EN 1990:2023+prA1:2024.
(6) EN 1991-3 does not provide actions or provisions for the design of cranes and machines.

Eurocode 1 - Einwirkungen auf Tragwerke - Teil 3: Einwirkungen infolge von Kranen und Maschinen

Eurocode 1 - Actions sur les structures - Partie 3: Actions induites par les appareils de levage et les machines

Evrokod 1 - Vplivi na konstrukcije – 3. del: Vpliv žerjavov in drugih strojev

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Jun-2024
• ICS: 53.020.20 - Cranes
• ICS: 91.010.30 - Technical aspects
• Technical Committee: KON - Structures
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 04-Apr-2024
• Due Date: 22-Aug-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/515 - Mandate for amending existing Eurocodes and extending the scope of structural Eurocodes
• Ref Project: prEN 1991-3 - Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machines

Relations

• Revises: SIST EN 1991-3:2006 - Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machinery
• Effective Date: 14-Oct-2020

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 1991-3:2024
01-junij-2024
Evrokod 1 - Vplivi na konstrukcije – 3. del: Vpliv žerjavov in drugih strojev
Eurocode 1 - Actions on structures - Part 3: Actions induced by cranes and machines
Eurocode 1 - Einwirkungen auf Tragwerke - Teil 3: Einwirkungen infolge von Kranen und
Maschinen
Eurocode 1 - Actions sur les structures - Partie 3: Actions induites par les appareils de
levage et les machines
Ta slovenski standard je istoveten z: prEN 1991-3
ICS:
53.020.20 Dvigala Cranes
91.010.30 Tehnični vidiki Technical aspects
oSIST prEN 1991-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1991-3:2024

---------------------- Page: 2 ----------------------
oSIST prEN 1991-3:2024


DRAFT
EUROPEAN STANDARD
prEN 1991-3
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2024
ICS 91.010.30 Will supersede EN 1991-3:2006
English Version

Eurocode 1 - Actions on structures - Part 3: Actions
induced by cranes and machines
Eurocode 1 - Actions sur les structures - Partie 3: Eurocode 1 - Einwirkungen auf Tragwerke - Teil 3:
Actions induites par les appareils de levage et les Einwirkungen infolge von Kranen und Maschinen
machines
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 250.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1991-3:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1991-3:2024
prEN 1991-3:2024 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 8
1.1 Scope of EN 1991-3 . 8
1.2 Assumptions . 8
2 Normative references . 8
3 Terms, definitions and symbols . 8
3.1 Terms and definitions . 8
3.1.1 General terms and definitions . 8
3.1.2 Terms and definitions commonly used in crane design . 10
3.1.3 Terms and definitions specific for travelling cranes . 12
3.1.4 Terms specific for supporting structures of travelling crane . 16
3.
...