SIST EN IEC 61347-2-14:2018/A11:2022
(Amendment)Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps
2021-04-13: This A11 is created to allow citation in OJEU of EN IEC 61347-2-14:2018
Geräte für Lampen - Teil 2-14: Besondere Anforderungen an gleich- und/oder wechselstromversorgte elektronische Betriebsgeräte für Induktions-Leuchtstofflampen
Appareillages de lampes - Partie 2-14: Exigences particulières pour les appareillages électroniques alimentés en courant continu et/ou alternatif pour les lampes fluorescentes à induction
Krmilne stikalne naprave za sijalke - 2-14. del: Posebne zahteve za enosmerno in/ali izmenično napajane elektronske krmilne stikalne naprave za fluorescenčne indukcijske sijalke - Dopolnilo A11
General Information
Relations
Overview
EN IEC 61347-2-14:2018/A11:2021 is an amendment (A11) to the European standard for lamp controlgear - Part 2-14 - that covers particular requirements for DC and/or AC supplied electronic controlgear used with fluorescent induction lamps. Approved by CENELEC on 15 September 2021 and prepared by CLC/TC 34 "Lighting", this amendment enables the standard to be cited in the Official Journal of the European Union and supports conformity with the EU Low Voltage Directive (2014/35/EU).
Key dates recorded in the amendment include national implementation deadlines (dop: 2022-09-15) and withdrawal of conflicting national standards by 2024-09-15. The document exists in English, French and German, and national translations notified to the CEN-CENELEC Management Centre have equal status.
Key Topics
- Scope and purpose: Clarifies and updates safety and performance requirements for electronic controlgear for fluorescent induction lamps supplied from DC and/or AC sources.
- Regulatory alignment: Supports the essential requirements of the EU Low Voltage Directive; Annex ZZ in the amendment documents the relationship with Directive 2014/35/EU.
- Standards integration: References and aligns with related international standards and normative publications listed in Annex ZA.
- CENELEC process: Notes on approval, national adoption, and the obligation of CENELEC members to implement the amendment as a national standard without alteration.
Applications
This amendment is relevant to manufacturers, test laboratories, certification bodies, and compliance officers involved with lighting equipment, specifically:
- Product developers of electronic controlgear for fluorescent induction lamps who need to ensure safety and performance compliance.
- Compliance teams seeking presumption of conformity with the EU Low Voltage Directive when the standard is cited in the Official Journal of the EU.
- Test laboratories and accreditation bodies verifying controlgear against updated normative clauses.
- National committees and standards bodies implementing the amendment into national regulations and guidance.
Benefits: clearer requirements for DC/AC controlgear, improved regulatory alignment across EU member states, and streamlined market access when conformity is demonstrated.
Related Standards
Normative references included in the amendment (Annex ZA) include, among others:
- IEC 60929 - AC and/or DC-supplied electronic controlgear for tubular fluorescent lamps
- IEC 61347-1 - Lamp controlgear - General and safety requirements
- IEC 61347-2-7 - Particular requirements for battery supplied electronic controlgear for emergency lighting
- IEC 61547 - EMC immunity requirements for general lighting equipment
- IEC 62532 - Fluorescent induction lamps - Safety specifications
- IEC 62639 - Fluorescent induction lamps - Performance specification
For implementation details, annex relationships to EU directives, and national adoption status, consult the full EN IEC 61347-2-14:2018/A11:2021 text and your national CENELEC member committee.
Frequently Asked Questions
SIST EN IEC 61347-2-14:2018/A11:2022 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic controlgear for fluorescent induction lamps". This standard covers: 2021-04-13: This A11 is created to allow citation in OJEU of EN IEC 61347-2-14:2018
2021-04-13: This A11 is created to allow citation in OJEU of EN IEC 61347-2-14:2018
SIST EN IEC 61347-2-14:2018/A11:2022 is classified under the following ICS (International Classification for Standards) categories: 29.130.01 - Switchgear and controlgear in general; 29.140.99 - Other standards related to lamps. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN IEC 61347-2-14:2018/A11:2022 has the following relationships with other standards: It is inter standard links to SIST EN IEC 61347-2-14:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN IEC 61347-2-14:2018/A11:2022 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU; Standardization Mandates: M/511. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN IEC 61347-2-14:2018/A11:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2022
Krmilne stikalne naprave za sijalke - 2-14. del: Posebne zahteve za enosmerno
in/ali izmenično napajane elektronske krmilne stikalne naprave za fluorescenčne
indukcijske sijalke - Dopolnilo A11
Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied
electronic controlgear for fluorescent induction lamps
Geräte für Lampen - Teil 2-14: Besondere Anforderungen an gleich- und/oder
wechselstromversorgte elektronische Betriebsgeräte für Induktions-Leuchtstofflampen
Appareillages de lampes - Partie 2-14: Exigences particulières pour les appareillages
électroniques alimentés en courant continu et/ou alternatif pour les lampes fluorescentes
à induction
Ta slovenski standard je istoveten z: EN IEC 61347-2-14:2018/A11:2021
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61347-2-14:2018/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 29.140.99
English Version
Lamp controlgear - Part 2-14: Particular requirements for DC
and/or AC supplied electronic controlgear for fluorescent
induction lamps
Appareillages de lampes - Partie 2-14: Exigences Geräte für Lampen - Teil 2-14: Besondere Anforderungen
particulières pour les appareillages électroniques alimentés an gleich- und/oder wechselstromversorgte elektronische
en courant continu et/ou alternatif pour les lampes Betriebsgeräte für Induktions-Leuchtstofflampen
fluorescentes à induction
This amendment A11 modifies the European Standard EN IEC 61347-2-14:2018; it was approved by CENELEC on 2021-09-15. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61347-2-14:2018/A11:2021 E
European foreword
This document (EN IEC 61347-2-14:2018/A11:2021) has been prepared by CLC/TC 34 "Lighting".
The following dates are fixed:
• latest date by which this document has to be (dop) 2022-09-15
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2024-09-15
conflicting with this document have to be
withdrawn
This document amends EN IEC 61347-2-14:2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...