iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 62271-109:2019

(Main)

High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches (IEC 62271-109:2019)

High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches (IEC 62271-109:2019)

This part of IEC 60794 presents the detailed requirements specific to this type of cable to
ensure compatibility with the series of International Standards ISO/IEC 11801, Information
technology – Generic cabling for customer premises (Parts 1 to 6).
The requirements of family specification IEC 60794-2-20 are applicable to cables covered by
this document.
Particular requirements detailed in Clause 4 define either a specific option in relation to the
requirements of IEC 60794-2-20 or additional requirements.

Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 109: Wechselstrom-Überbrückungsschalter für Reihenkondensatoren (IEC 62271-109:2019)

Appareillage à haute tension - Partie 109: Interrupteurs de contournement pour condensateurs série à courant alternatif (IEC 62271-109:2019)

IEC 62271-109:2019 est disponible sous forme de IEC 62271-109:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.
L’IEC 62271-109:2019 est applicable aux interrupteurs de contournement pour condensateurs série à courant alternatif conçus pour l'installation à l'extérieur et pour fonctionner à des fréquences de 50 Hz et 60 Hz, sur des réseaux de tensions supérieures à 52 kV. Elle s’applique uniquement aux interrupteurs de contournement destinés à être utilisés dans les systèmes triphasés. Le présent document est également applicable aux dispositifs de commande des interrupteurs de contournement et à leurs équipements auxiliaires. Cette troisième édition annule et remplace la deuxième édition parue en 2008 et son Amendement 1:2013. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le document a été remanié selon l’édition 2.0 de l’IEC 62271-1;
b) l'assignation de tensions assignées aux bornes de l’interrupteur de contournement a été alignée sur la règle définie dans l’IEC 60143-1;
c) des précisions ont été apportées au sujet du courant permanent assigné de la ligne compensée et de la ligne non compensée;
d) des clarifications ont été apportées suivant une perte des "précautions appropriées";
e) conformément à l’Amendement 2 de l’IEC 62271-100, la section "Durées assignées" a été déplacée à l’Article 6 sous "Durées";
f) conformément à l’Amendement 2 de l’IEC 62271-100, la section "Essai des charges mécaniques statiques" a été déplacée à l’Article 6 sous "Charges mécaniques statiques";
g) des règles supplémentaires ont été introduites pour les ampoules à vide pendant les essais de chocs;
h) des clarifications supplémentaires ont été apportées au sujet du nombre de chocs réduits pendant les essais de chocs;
i) une tolérance plus grande pour l'amortissement du courant pendant la séquence d’essai d’établissement du courant de contournement a été introduite.

Visokonapetostne stikalne in krmilne naprave - 109. del: Stikala z zaporednimi kondenzatorji na izmenični tok (IEC 62271-109:2019)

Ta del standarda IEC 60794 vsebuje podrobne zahteve za ta tip kablov
za zagotavljanje skladnosti z vrsto mednarodnih standardov ISO/IEC 11801, Informacijska
tehnologija – Splošni kabli v prostorih strank (deli od 1 do 6).
Za kable, ki jih zajema ta dokument, se uporabljajo zahteve skupinske specifikacije IEC 60794-2-20.
Posebne zahteve, podrobno opredeljene v točki 4, določajo bodisi posebno možnost v zvezi z zahtevami iz standarda IEC 60794-2-20 bodisi dodatne zahteve.

General Information

Status
Published
Publication Date
16-Jun-2019
ICS
29.130.10 - High voltage switchgear and controlgear
Technical Committee
SKA - Switchgear and control gear
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Jun-2019
Due Date
17-Aug-2019
Completion Date
17-Jun-2019
Ref Project
EN IEC 62271-109:2019 - High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches

Relations

Revised
SIST EN 62271-109:2009/A1:2013 - High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches (IEC 62271-109:2008/A1:2013)
Effective Date
13-Nov-2017
Replaces
SIST EN 62271-109:2009/A1:2013 - High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches (IEC 62271-109:2008/A1:2013)
Effective Date
04-Jun-2019
Replaces
SIST EN 62271-109:2009 - High-voltage switchgear and controlgear - Part 109: Alternating current series capacitor by-pass switches (IEC 62271-109:2008)
Effective Date
04-Jun-2019
Replaces
SIST EN 62271-109:2009/A1:2013 - High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor by-pass switches (IEC 62271-109:2008/A1:2013)
Effective Date
07-Jun-2022

Buy Standard

EN IEC 62271-109:2019EN IEC 62271-109:2019
PreviousNext
Standard
EN IEC 62271-109:2019
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62271-109:2019
01-september-2019
Nadomešča:
SIST EN 62271-109:2009
SIST EN 62271-109:2009/A1:2013
Visokonapetostne stikalne in krmilne naprave - 109. del: Stikala z zaporednimi
kondenzatorji na izmenični tok (IEC 62271-109:2019)
High-voltage switchgear and controlgear - Part 109: Alternating-current series capacitor
by-pass switches (IEC 62271-109:2019)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 109: Wechselstrom-
Überbrückungsschalter für Reihenkondensatoren (IEC 62271-109:2019)
Appareillage à haute tension - Partie 109: Interrupteurs de contournement pour
condensateurs série à courant alternatif (IEC 62271-109:2019)
Ta slovenski standard je istoveten z: EN IEC 62271-109:2019
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 62271-109:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN IEC 62271-109:2019

---------------------- Page: 2 ----------------------

SIST EN IEC 62271-109:2019


EUROPEAN STANDARD EN IEC 62271-109

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2019
ICS 29.130.10 Supersedes EN 62271-109:2009
English Version
High-voltage switchgear and controlgear - Part 109: Alternating-
current series capacitor by-pass switches
(IEC 62271-109:2019)
Appareillage à haute tension - Partie 109: Interrupteurs de Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil
contournement pour condensateurs série à courant 109: Wechselstrom-Überbrückungsschalter für
alternatif Reihenkondensatoren
(IEC 62271-109:2019) (IEC 62271-109:2019)
This European Standard was approved by CENELEC on 2019-05-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62271-109:2019 E

---------------------- Page: 3 ----------------------

SIST EN IEC 62271-109:2019
EN IEC 62271-109:2019 (E)
European foreword
The text of document 17A/1208/FDIS, future edition 3 of IEC 62271-109, prepared by SC 17A
"Switching devices" of IEC/TC 17 "High-voltage switchgear and controlgear" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 62271-109:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-02-13
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-05-13
document have to be withdrawn

This document supersedes EN 62271-109:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62271-109:2019 was approved by CENELEC as a
European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60060-1:2010 NOTE Harmonized as EN 60060-1:2010 (not modified)
IEC 60071-1 NOTE Harmonized as EN 60071-1
IEC 60071-2 NOTE Harmonized as EN IEC 60071-2
IEC 62271-200 NOTE Harmonized as EN 62271-200
IEC 62271-203 NOTE Harmonized as EN 62271-203
IEC 60296 NOTE Harmonized as EN 60296
IEC 60529 NOTE Harmonized as EN 60529

2

---------------------- Page: 4 ----------------------

SIST EN IEC 62271-109:2019
EN IEC 62271-109:2019 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050-151 2001 International Electrotechnical Vocabulary - Part 151: - -
Electrical and magnetic devices
IEC 60050-436 1990 International Electrotechnical Vocabulary. Chapter - -
436: Power capacitors
IEC 60050-441 1984 International Electrotechnical Vocabulary. - -
Switchgear, controlgear and fuses
IEC 60050-614 2016 International Electrotechnical Vocabulary - Part 614: - -
Generation, transmission and distribution of
electricity - Operation
IEC 60060 series High-voltage test techniques  EN 60060 series
IEC 60137 2017 Insulated bushings for alternating voltages above EN 60137 2017
1000 V
IEC 60143-1 2015 Series capacitors for power systems - Part 1: EN 60143-1 2015
General
IEC 60143-2 2012 Series capacitors for power systems - Part 2: EN 60143-2 2013
Protective equipment for series capacitor banks
IEC 60270 -  High-voltage test techniques - Partial discharge EN 60270 -
measurements
IEC 60376 -  Specification of technical grade sulphur EN IEC 60376 -
hexafluoride (SF ) and complementary gases to be
6
used in its mixtures for use in electrical equipment
IEC 60480 -  Specifications for the re-use of sulphur hexafluoride - -
(SF ) and its mixtures in electrical equipment
6
IEC 62271-1 2017 High-voltage switchgear and controlgear - Part 1: EN 62271-1 2017
Common specifications for alternating current
switchgear and controlgear
IEC 62271-4 -  High-voltage switchgear and controlgear - Part 4: EN 62271-4 -
Handling procedures for sulphur hexafluoride (SF )
6
and its mixtures
IEC 62271-100 2008 High-voltage switchgear and controlgear - Part 100: EN 62271-100 2009
Alternating current circuit-breakers
3

---------------------- Page: 5 ----------------------

SIST EN IEC 62271-109:2019
EN IEC 62271-109:2019 (E)
+ A1 2012  + A1 2012
+ A2 2017  + A2 2017
IEC 62271-101 -  High-voltage switchgear and controlgear - Part 101: EN 62271-101 -
Synthetic testing
IEC 62271-102 2018 High-voltage switchgear and controlgear - Part 102: EN IEC 62271-2018
Alternating current disconnectors and earthing 102
switches

4

---------------------- Page: 6 ----------------------

SIST EN IEC 62271-109:2019



IEC 60794-2-21

®


Edition 3.0 2019-04




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE











Optical fibre cables –

Part 2-21: Indoor cables – Detailed specification for multi-fibre optical

distribution cables for use in premises cabling




Câbles à fibres optiques –

Partie 2-21: Câbles intérieurs – Spécification particulière pour les câbles


optiques multifibres de distribution utilisés dans le câblage de locaux













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 33.180.10 ISBN 978-2-8322-6758-5




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN IEC 62271-109:2019
– 2 – IEC 60794-2-21:2019 © IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 6
5 Particular requirements . 6
5.1 Fibre selection for cable testing . 6
5.2 Environmental requirements – Temperature cycling . 6
5.3 Transmission requirements . 7
5.3.1 Attenuation of cabled fibre . 7
5.3.2 Fibre bandwidth requirements . 7
Bibliography . 8

Table 1 – Multimode cable maximum attenuation coefficient (dB/km) . 7
Table 2 – Single-mode cable maximum attenuation coefficient (dB/km) . 7
Table 3 – Minimum multimode fibre bandwidth (MHz·km) . 7

---------------------- Page: 8 ----------------------

SIST EN IEC 62271-109:2019
IEC 60794-2-21:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

OPTICAL FIBRE CABLES –

Part 2-21: Indoor cables –
Detailed specification for multi-fibre optical distribution cables
for use in premises cabling

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to tec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62271-110:2023(Main)
High-voltage switchgear and controlgear - Part 110: Inductive load switching (IEC 62271-110:2023)
EN IEC 62271-110:2023

This part of IEC 62271 is applicable to AC switching devices designed for indoor or outdoor
installation, for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above
1 000 V and applied for inductive current switching. It is applicable to switching devices
(including circuit-breakers in accordance with IEC 62271-100) that are used to switch
high-voltage motor currents and shunt reactor currents and also to high-voltage contactors used
to switch high-voltage motor currents as covered by IEC 62271-106.
Switching unloaded transformers, i.e. breaking transformer magnetizing current, is not
considered in this document. The reasons for this are as follows:
a) Owing to the non-linearity of the transformer core, it is not possible to correctly model the
switching of transformer magnetizing current using linear components in a test laboratory.
Tests conducted using an available transformer, such as a test transformer, will only be
valid for the transformer tested and cannot be representative for other transformers.
b) As detailed in IEC TR 62271-306, the characteristics of this duty are usually less severe
than any other inductive current switching duty. Such a duty can produce severe
overvoltages within the transformer winding(s) depending on the re-ignition behaviour of the
switching device and transformer winding resonance frequencies.
NOTE 1 The switching of tertiary reactors from the high-voltage side of the transformer is not covered by this
document.
NOTE 2 The switching of shunt reactors earthed through neutral reactors is not covered by this document. However,
the application of test results according to this document, on the switching of neutral reactor earthed reactors (4-leg
reactor scheme), is discussed in IEC TR 62271-306.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50089:2023(Main)
High-Voltage switchgear and controlgear - Insulating pressurised partitions for gas filled metal enclosures
EN 50089:2022

This document applies to pressurized partitions used in indoor and outdoor installations of high-voltage AC and DC switchgear and controlgear with rated voltages (Ur) above 1 kV AC / 1,5 kV DC and with design pressure higher than 300 kPa, where the gas is used principally for its dielectric and/or arc-quenching properties.
Gases with insulating properties are dry air, inert gases, for example sulphur hexafluoride or nitrogen or a mixture of such gases.
The partitions comprise pressurized barriers in electrical equipment not necessarily limited to the following examples:
—   circuit-breakers;
—   switch-disconnectors;
—   disconnectors;
—   earthing switches;
—   current transformers;
—   voltage transformers;
—   surge arrestors;
—   busbars and connections;
—   cable connections / terminations
—   cable bushings
—   etc.
Partitions which are only pressurized from one side are also covered.
1 kV AC / 1,5 kV DC means it is valid for the apparatus applied and where the partitions are installed, however, the application of voltages below 1 kV AC / 1,5 kV DC as in e.g. current and voltage transformer are not excluded.
This document does not apply to high voltage bushings (see EN 60137, EN 61462 and EN 62155).

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-4:2022(Main)
High-voltage switchgear and controlgear - Part 4: Handling procedures for gases for insulation and/or switching (IEC 62271-4:2022)
EN IEC 62271-4:2022

This part of IEC 62271 applies to the procedures for handling of gases and gas mixtures for insulation and/or switching during installation, commissioning, repair, overhaul, normal and abnormal operations and disposal at the end-of-life of high-voltage switchgear and controlgear.
These procedures are regarded as minimum requirements to ensure the reliability of electric power equipment, the safety of personal working with these gases and gas mixtures and to minimize the impact on the environment. Additional requirements could be given or specified in the operating instruction manual of the manufacturer.
For each gas or gas mixture, which is known to be used in electric power equipment at the date of the publication of this document, a separate annex describes specifications, handling procedures, safety measures, etc. For gases or gas mixtures not covered by these annexes the electric power equipment manufacturer should provide the information needed, following the structure of these annexes. Such gases or gas mixtures should also be described in a next edition or in amendments to this edition.
NOTE 1 For the use of this document, high-voltage (HV) is defined as the rated voltage above 1 000 V. However, the term medium-voltage (MV) is commonly used for distribution systems with voltages above 1 kV and generally applied up to and including 52 kV.
NOTE 2 Throughout this standard, the term "pressure" stands for "absolute pressure".
NOTE 3 Reference is also made to (Cigré Brochure 802, 2020).
NOTE 4 For further details on gases, e.g. ecotoxicology, also refer to the chemical database ECHA (www.echa.europa.eu), which takes the actual volume band into consideration.
NOTE 5 When reference to circuit-breakers is made, only gas circuit-breakers are of interest. When vacuum circuit breakers are of interest, they are explicitly mentioned.

  • Standard
    241 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    241 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-100:2021/AC:2022(Corrigendum)
High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers (IEC 62271-100:2021/COR2:2022)
EN IEC 62271-100:2021/AC:2022-09

IEC Corrected Version

  • Corrigendum
    6 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
  • Corrigendum
    6 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-203:2022(Main)
High-voltage switchgear and controlgear - Part 203: AC gas-insulated metal-enclosed switchgear for rated voltages above 52 kV (IEC 62271-203:2022)
EN IEC 62271-203:2022

This part of IEC 62271 specifies requirements for gas-insulated metal-enclosed switchgear in which the insulation is obtained, at least partly, by an insulating gas or gas mixture other than air at atmospheric pressure, for alternating current of rated voltages above 52 kV, for indoor and outdoor installation, and for service frequencies up to and including 60 Hz.
For the purpose of this standard, the terms "GIS" and "switchgear" are used for "gas-insulated metal-enclosed switchgear".
The gas-insulated metal-enclosed switchgear covered by this standard consists of individual components intended to be directly connected together and able to operate only in this manner.
This standard completes and amends, if necessary, the various relevant standards applying to the individual components constituting GIS.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-204:2022(Main)
High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV (IEC 62271-204:2022)
EN IEC 62271-204:2022

This part of IEC 62271 applies to rigid HV gas-insulated transmission lines (GIL) in which the insulation is obtained, at least partly, by a non-corrosive insulating gas, other than air at atmospheric pressure, for alternating current of rated voltages above 52 kV, and for service frequencies up to and including 60 Hz. It is intended that this international standard shall be used where the provisions of IEC 62271-203 do not cover the application of GIL (see Note 3).
At each end of the HV gas-insulated transmission line, a specific element may be used for the connection between the HV gas-insulated transmission line and other equipment like bushings, power transformers or reactors, cable boxes, metal-enclosed surge arresters, voltage transformers or GIS, covered by their own specification.
Unless otherwise specified, the HV gas-insulated transmission line is designed to be used under normal service conditions.
Note 1 to entry: In this international standard, the term "HV gas-insulated transmission line" is abbreviated to "GIL".
Note 2 to entry: In this international standard, the word "gas" means gas or gas mixture, as defined by the manufacturer.
Note 3 to entry: Examples of GIL applications are given:
- where all or part of the HV gas-insulated transmission line is directly buried; or
- where the HV gas-insulated transmission line is located, wholly or partly, in an area accessible to public; or
- where the HV gas-insulated transmission line is long (typically longer than to 500 m) and the typical gas compartment length exceeds the common practice of GIS technology.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-202:2022(Main)
High-voltage switchgear and controlgear - Part 202: AC prefabricated substations for rated voltages above 1 kV and up to and including 52 kV (IEC 62271-202:2022)
EN IEC 62271-202:2022

This part of IEC 62271 specifies the service conditions, rated characteristics, general structural requirements and test methods of enclosed high-voltage prefabricated substations. These prefabricated substations are cable-connected to AC high-voltage networks with highest operating voltage up to and including 52 kV and power frequencies up to and including 60 Hz. They can be manually operated from inside (walk-in type) or from outside (non-walk-in type).They are designed for outdoor installation at locations with public accessibility and where protection of personnel is provided.
These prefabricated substations can be situated at ground level or partially or completely below ground level. The last are also called underground prefabricated substations.
In general, two types of prefabricated substations are considered in this standard:
- high-voltage switching prefabricated substations;
- high-voltage/low-voltage transformer prefabricated substations (step-up and step-down).
A high-voltage switching prefabricated substation comprises an enclosure containing in general the following electrical components:
- high-voltage switchgear and controlgear;
- auxiliary equipment and circuits.
A high-voltage/low-voltage transformer prefabricated substation comprises an enclosure containing in general the following electrical components:
- power transformers;
- high-voltage and low-voltage switchgear and controlgear;
- high-voltage and low-voltage interconnections;
- auxiliary equipment and circuits.
However, relevant provisions of this standard are applicable to designs where not all these electrical components exist (for example, a prefabricated substation consisting of power transformer and low-voltage switchgear and controlgear).
The listed electrical components of a high-voltage/low-voltage transformer prefabricated substation can be incorporated in the prefabricated substation either as separate components or as an assembly type CEADS according to IEC 62271-212.
This standard covers only designs using natural ventilation. However, relevant provisions of this standard are applicable to designs using other means of ventilation except the rated power of the prefabricated substation and associated class of enclosure (see 5.101), the continuous current tests (see 7.5) and all temperature rise related requirements, which would require an agreement between manufacturer and user.
NOTE IEC 61936-1 [1] provides general rules for the design and erection of high-voltage power installations. As well, it specifies additional requirements for the external connections, erection and operation at the place of installation of high-voltage prefabricated substations compliant with IEC 62271-202, which are regarded as a component of such installation. Non-prefabricated high-voltage substations, 483 are generally covered by IEC 61936-1 [1].

  • Standard
    124 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-212:2022(Main)
High-voltage switchgear and controlgear - Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV (IEC 62271-212:2022)
EN IEC 62271-212:2022

This part of IEC 62271 specifies the service conditions, rated characteristics, general structural
requirements and test methods of the assemblies of the main electrical functional units of a
high-voltage transformer substation, duly interconnected, for AC voltages up to and including
52 kV on the high-voltage side and service frequency 50 Hz or 60 Hz. The CEADS is
cable-connected to the high-voltage network for indoor and outdoor applications of restricted
access.
A CEADS as defined in this document is designed and tested to be a single product with a
single serial number and one set of documentation.
The functions of a CEADS are:
– high-voltage/high-voltage or high-voltage/low-voltage transformation;
and some or all the following:
– switching and control for the operation of the high-voltage circuit(s);
– switching and control for the operation of the low-voltage circuit(s);
– protection of the power transformer functional unit.
The main functions are integrated in the following functional units:
– high-voltage functional unit;
– power transformer functional unit;
– low-voltage functional unit.
NOTE For the purpose of this document a self-protected transformer is not considered as a CEADS, but as a
functional unit, designed and type tested to its own product standard IEC 60076-13:2006.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-102:2018/A1:2022(Amendment)
High-voltage switchgear and controlgear - Part 102: Alternating current disconnectors and earthing switches (IEC 62271-102:2018/AMD1:2022)
EN IEC 62271-102:2018/A1:2022
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62271-209:2019/A1:2022(Amendment)
High-voltage switchgear and controlgear - Part 209: Cable connections for gasinsulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations (IEC 62271-209:2019/AMD1:2022)
EN IEC 62271-209:2019/A1:2022
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day