kSIST FprEN 13501-2:2023
(Main)Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance and/or smoke control tests, excluding ventilation services
This document specifies the procedure for classification of construction products and building elements using data from fire resistance and smoke leakage tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this document.
This document deals with:
a) loadbearing elements without a fire separating function:
— walls;
— floors;
— roofs;
— beams;
— columns;
— balconies;
— walkways;
— stairs.
b) loadbearing elements with a fire separating function, with or without glazing, services and fixtures:
— walls;
— floors;
— roofs;
— raised floors.
c) products and systems for protecting elements or parts of the works:
— ceilings with no independent fire resistance;
— fire protective coatings, claddings and screens;
d) non-loadbearing elements or parts of works, with or without glazing, services and fixtures:
— partitions;
— facades (curtain walls) and external walls;
— ceilings with independent fire resistance;
— raised floors;
— fire doors and shutters and their closing devices;
— smoke control doors;
— conveyor systems and their closures;
— penetration seals;
— linear joint seals;
— service ducts and shafts;
— air transfer grilles.
— chimneys.
e) wall and ceiling coverings with fire protection ability.
f) lift landing doors which are tested according to EN 81 58 are excluded from this document. Lift landing doors which are tested in accordance with EN 1634 1 are classified in accordance with 7.5.5.
Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7.
Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 2: Klassifizierung mit Ergebnissen aus Feuerwiderstandsprüfungen und/oder Rauchschutzprüfungen, mit Ausnahme von Lüftungsanlagen
Dieses Dokument spezifiziert das Verfahren zur Klassifizierung von Bauprodukten und Bauteilen anhand der Ergebnisse von Feuerwiderstandsprüfungen und Prüfungen zur Rauchdichtheit entsprechend dem direkten Anwendungsbereich der zugehörigen Prüfverfahren. Die Klassifizierung auf der Basis des erweiterten Anwendungsbereichs von Versuchsergebnissen wird ebenfalls in diesem Dokument behandelt.
Dieses Dokument behandelt:
a) tragende Bauteile ohne raumabschließende Funktion:
— Wände;
— Decken;
— Dächer;
— Balken;
— Stützen;
— Balkone;
— Laubengänge;
— Treppen;
b) tragende Bauteile mit raumabschließender Funktion, mit oder ohne Verglasung, haustechnischer Anlagen und Befestigungen:
— Wände;
— Decken;
— Dächer;
— Doppelböden;
c) Produkte und Systeme zum Schutz von Bauteilen oder Teilen von Bauwerken:
— Unterdecken ohne eigene Feuerwiderstandsfähigkeit;
— Brandschutzbeschichtungen, Bekleidungen und Abschirmungen;
d) nichttragende Bauteile oder Teile von Bauwerken, mit oder ohne Verglasung, haustechnischer Anlagen und Befestigungen:
— Trennwände;
— Vorhangfassaden und Außenwände;
— Unterdecken mit eigener Feuerwiderstandsfähigkeit;
— Doppelböden;
— Feuerschutztüren und Abschlüsse und ihre Schließmittel;
— Rauchschutztüren;
— Förderanlagen und ihre Abschlüsse;
— Abschottungen von Durchführungen;
— Abdichtungssysteme für Bauteilfugen;
— Installationskanäle und -schächte;
— Lüftungsbausteine;
— Abgasanlagen;
e) brandschutztechnisch wirksame Bekleidungen von Wänden und Decken;
f) Fahrschachttüren, die nach EN 81 58 geprüft wurden, sind nicht Gegenstand dieses Dokuments. Fahrschachttüren, die nach EN 1634 1 geprüft wurden, werden nach 7.5.5 klassifiziert.
Die jeweils geltenden Prüfverfahren, die für diese Produkte entwickelt worden sind, sind in den Abschnitten 2 und 7 aufgelistet.
Classement au feu des produits et éléments de construction - Partie 2 : Classement à partir des données d’essais de résistance au feu et/ou de contrôle des fumées à l’exclusion des produits utilisés dans les systèmes de ventilation
Le présent document spécifie le mode opératoire de classement des produits et éléments de construction à partir des données des essais de résistance au feu et d’étanchéité aux fumées qui font partie du domaine d’application directe de la méthode d’essai correspondante. Le domaine d’application du présent document inclut également le classement basé sur l’application étendue des résultats d’essai.
Le présent document couvre les produits et éléments suivants :
a) éléments porteurs sans fonction de compartimentage :
— murs ;
— planchers ;
— toitures ;
— poutres ;
— poteaux ;
— balcons ;
— passerelles ;
— escaliers ;
b) éléments porteurs ayant une fonction de compartimentage, avec ou sans vitrage, services et accessoires :
— murs ;
— planchers ;
— toitures ;
— planchers surélevés ;
c) produits et systèmes destinés à protéger des éléments ou des parties des ouvrages :
— plafonds n’ayant pas de résistance au feu propre ;
— revêtements, enduits, bardages et écrans de protection incendie ;
d) éléments non porteurs ou parties d’ouvrages, avec ou sans vitrage, services et accessoires :
— cloisons ;
— façades (murs rideaux) et murs extérieurs ;
— plafonds ayant une résistance au feu propre ;
— planchers surélevés ;
— portes et fermetures résistantes au feu ainsi que leurs systèmes de fermeture ;
— portes étanches aux fumées ;
— fermetures de passages pour convoyeurs et bandes transporteuses ;
— calfeutrements ;
— calfeutrements de joints linéaires ;
— gaines pour installation technique ;
— grilles de transfert ;
— conduits de fumée (cheminées) ;
e) revêtements de murs et de plafonds avec capacité de protection contre l’incendie ;
f) les portes palières d’ascenseurs qui sont soumises à essai conformément à l’EN 81 58 sont exclues du présent document. Les portes palières d’ascenseurs qui sont soumises à essai conformément à l’EN 1634 1 sont classées conformément à 7.5.5.
Les Articles 2 et 7 donnent la liste des méthodes d’essais pertinentes qui ont été élaborées pour ces éléments.
Požarna klasifikacija gradbenih proizvodov in elementov stavb - 2. del: Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti in/ali dimotesnosti, izvzete so prezračevalne naprave
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13501-2:2021
01-oktober-2021
Požarna klasifikacija gradbenih proizvodov in elementov stavb - 2. del:
Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti, izvzete so
prezračevalne naprave
Fire classification of construction products and building elements - Part 2: Classification
using data from fire resistance tests, excluding ventilation servicesKlassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 2:
Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen, mit Ausnahme
von LüftungsanlagenClassement au feu des produits et éléments de construction — Partie 2 : Classement à
partir des données d’essais de résistance au feu à l’exclusion des produits utilisés dans
les systèmes de ventilationTa slovenski standard je istoveten z: prEN 13501-2
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
oSIST prEN 13501-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 13501-2:2021
---------------------- Page: 2 ----------------------
oSIST prEN 13501-2:2021
DRAFT
EUROPEAN STANDARD
prEN 13501-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2021
ICS 13.220.50 Will supersede EN 13501-2:2016
English Version
Fire classification of construction products and building
elements - Part 2: Classification using data from fire
resistance tests, excluding ventilation services
Classement au feu des produits et éléments de Klassifizierung von Bauprodukten und Bauarten zu
construction - Partie 2 : Classement à partir des ihrem Brandverhalten - Teil 2: Klassifizierung mit den
données d'essais de résistance au feu à l'exclusion des Ergebnissen aus den Feuerwiderstandsprüfungen, mit
produits utilisés dans les systèmes de ventilation Ausnahme von LüftungsanlagenThis draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 127.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13501-2:2021 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
Contents Page
European foreword ....................................................................................................................................................... 4
Introduction..................................................................................................................................................................... 6
1 Scope .................................................................................................................................................................... 7
2 Normative references .................................................................................................................................... 8
3 Terms and definitions................................................................................................................................. 11
4 Fire scenarios ................................................................................................................................................. 16
4.1 General ............................................................................................................................................................. 16
4.2 The standard temperature/time curve (post flash-over fire) ..................................................... 16
4.3 The slow heating curve (smouldering fire) ........................................................................................ 16
4.4 The ‘semi-natural’ fire ................................................................................................................................ 17
4.5 The external fire exposure curve ........................................................................................................... 17
4.6 Constant temperature attack ................................................................................................................... 17
5 Resistance to fire performance characteristics................................................................................. 18
5.1 General ............................................................................................................................................................. 18
5.2 Performance characteristics .................................................................................................................... 18
5.2.1 R - Loadbearing capacity ............................................................................................................................ 18
5.2.2 E - Integrity ..................................................................................................................................................... 18
5.2.3 I - Thermal insulation ................................................................................................................................. 19
5.2.4 W - Radiation .................................................................................................................................................. 21
5.2.5 M - Mechanical action .................................................................................................................................. 21
5.2.6 C - Self-closing ................................................................................................................................................ 21
5.2.7 S - Smoke leakage ......................................................................................................................................... 22
5.2.8 O - Normal operating conditions ............................................................................................................. 22
5.2.9 G - ‘Soot fire’ resistance .............................................................................................................................. 22
5.2.10 K - Fire protection ability .......................................................................................................................... 23
6 Declaration of fire resistance performance ........................................................................................ 23
6.1 Classification periods .................................................................................................................................. 23
6.2 Designatory letters ...................................................................................................................................... 23
6.3 Declaration of performance ..................................................................................................................... 24
6.4 Combinations of classes ............................................................................................................................. 24
6.5 Particular classifications ........................................................................................................................... 24
6.5.1 Doors and shutters ....................................................................................................................................... 24
6.5.2 Conveyor systems and their closures.................................................................................................... 25
6.6 Additional performance parameters .................................................................................................... 25
6.6.1 Optional performance parameters ........................................................................................................ 25
6.6.2 Expansion of performance parameters ................................................................................................ 25
6.6.3 Particular performance parameters ..................................................................................................... 26
6.7 Presentation of classification ................................................................................................................... 26
6.8 Declaration of fire resistance classes in product specifications ................................................. 26
7 Classification procedure for fire resistance ....................................................................................... 27
7.1 General ............................................................................................................................................................. 27
7.1.1 Procedure ........................................................................................................................................................ 27
---------------------- Page: 4 ----------------------oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
7.1.2 General rules for deducing the number of standard temperature/time fire
resistance tests .............................................................................................................................................. 28
7.1.3 Field of application ...................................................................................................................................... 30
7.2 Classification of loadbearing elements without a fire separating function ............................ 30
7.2.1 General ............................................................................................................................................................. 30
7.2.2 Classification of loadbearing walls without separating function ................................................ 30
7.2.3 Classification of loadbearing floors and roofs without fire separating function................... 31
7.2.4 Classification of beams ............................................................................................................................... 32
7.2.5 Classification of columns ........................................................................................................................... 33
7.2.6 Classification of balconies, walkways and stairs ............................................................................... 34
7.3 Classification of loadbearing elements with fire separating function ...................................... 35
7.3.1 General ............................................................................................................................................................. 35
7.3.2 Classification of loadbearing walls with fire separating function .............................................. 35
7.3.3 Classification of loadbearing floors and roofs with fire separating function ......................... 37
7.3.4 Classification of raised floors ................................................................................................................... 39
7.4 Products and systems for protecting elements or parts of works .............................................. 41
7.4.1 General ............................................................................................................................................................. 41
7.4.2 Tests to be carried out ................................................................................................................................ 41
7.4.3 Test methods .................................................................................................................................................. 42
7.4.4 Performance criteria ................................................................................................................................... 42
7.4.5 Classes ............................................................................................................................................................... 42
7.4.6 Classification of protected structural members ................................................................................ 42
7.5 Classification of non-loadbearing elements........................................................................................ 46
7.5.1 General ............................................................................................................................................................. 46
7.5.2 Partitions ......................................................................................................................................................... 46
7.5.3 Classification of facades (curtain walling) and external walls (including glazed
elements) ......................................................................................................................................................... 48
7.5.4 Classification of ceilings with independent fire resistance ........................................................... 50
7.5.5 Classification of fire doors and shutters including their closing devices ................................. 51
7.5.6 Classification of smoke control doors ................................................................................................... 53
7.5.7 Classification of closure and conveyor system assemblies ........................................................... 55
7.5.8 Classification of penetration seals .......................................................................................................... 56
7.5.9 Classification of linear joint seals ........................................................................................................... 58
7.5.10 Classification of service ducts and shafts ............................................................................................. 60
7.5.11 Classification of chimneys ......................................................................................................................... 62
7.5.12 Classification of air transfer grilles ........................................................................................................ 65
7.6 Classification of wall and ceiling coverings for fire protection ability ...................................... 67
7.6.1 General ............................................................................................................................................................. 67
7.6.2 Test method .................................................................................................................................................... 67
7.6.3 Tests to be carried out ................................................................................................................................ 67
7.6.4 Performance criteria for fire protection ability ................................................................................ 68
7.6.5 Classes ............................................................................................................................................................... 69
Bibliography ................................................................................................................................................................. 87
---------------------- Page: 5 ----------------------oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
European foreword
This document (prEN 13501-2:2021) has been prepared by Technical Committee CEN/TC 127 “Fire
safety in buildings”, the secretariat of which is held by BSI.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13501-2:2016.
Changes have been made in this revision to bring it in line with the relevant current EC Decisions on
fire resistance classification, and experience in use in the first edition. In comparison with the
previous edition, the following technical modifications have been made:— In 7.5.2.1: adding reference to new EXAP standard;
— In all paragraphs concerned: introduction of proposal from TC/166 for Chimney;
— In all paragraphs concerned: introduction of proposal for Air transfer Grid;
— In all paragraphs concerned: introduction of FprEN 15882-5;
— In all paragraphs concerned: update on criterion description for load bearing elements
(EN 1363-1):— In 7.3.2: modification related to EN 1365-1;
— In 7.5.2.1: introduction of EN 15252-3;
— In 7.3.4.4: modification of classification table;
— In 7.5.9.4: modification of classification table.
EN 13501, Fire classification of construction products and building elements, consists of the following
Parts:— Part 1: Classification using data from reaction to fire tests
— Part 2: Classification using data from fire resistance tests, excluding ventilation services
— Part 3: Classification using data from fire resistance tests on components of normal building
service installations: fire resisting ducts and fire dampers— Part 4: Classification using data from fire resistance tests on components of smoke control systems
— Part 5: Classification using data from external fire exposure to roof tests— Part 6: Classification using data from reaction to fire tests on power, control and communication
cablesCEN, CENELEC and EOTA committees preparing technical specifications which contain performance
requirements against fire resistance tests are expected to make reference to the fire resistance
classification given in this document and not refer directly to any specific fire test method.
---------------------- Page: 6 ----------------------oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.---------------------- Page: 7 ----------------------
oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
Introduction
The aim of this document is to define a harmonized procedure for the classification for resistance to
fire of construction products and building elements. This classification is based on the test
procedures listed in Clause 2 and the relevant field of application procedures.This document is prepared in support of the second basic requirement, in the EC Construction
Products Regulation (305/2011) and is detailed in the Interpretative Document number 2 (ID2):
Safety in case of fire (OJC62 Vol 37).The Interpretative Document and the Commission Decision of 2 May 2000 specify performance and
classes regarding fire resistance. These classes are identified by designation letters, each of which
refers to an important characteristic of fire resistance behaviour.This document provides for a common understanding for these requirements. It interprets the
functional requirements for the different groups of building elements and explains the method for
deriving their classification on the basis of test results and/or extended application results for
individual elements.NOTE Test reports constitute the basis for extended application reports as explained in EN 15725.
---------------------- Page: 8 ----------------------oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
1 Scope
This document specifies the procedure for classification of construction products and building
elements using data from fire resistance and smoke leakage tests which are within the direct field of
application of the relevant test method. Classification on the basis of extended application of test
results is also included in the scope of this document.This document deals with:
a) loadbearing elements without a fire separating function:
— walls;
— floors;
— roofs;
— beams;
— columns;
— balconies;
— walkways;
— stairs.
b) loadbearing elements with a fire separating function, with or without glazing, services and
fixtures:— walls;
— floors;
— roofs;
— raised floors.
c) products and systems for protecting elements or parts of the works:
— ceilings with no independent fire resistance;
— fire protective coatings, claddings and screens;
d) non-loadbearing elements or parts of works, with or without glazing, services and fixtures:
— partitions;— facades (curtain walls) and external walls;
— ceilings with independent fire resistance;
— raised floors;
---------------------- Page: 9 ----------------------
oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
— fire doors and shutters and their closing devices;
— smoke control doors;
— conveyor systems and their closures;
— penetration seals;
— linear joint seals;
— service ducts and shafts;
— air transfer grilles.
— chimneys.
e) wall and ceiling coverings with fire protection ability.
f) lift landing doors which are tested according to EN 81-58 are excluded from this document. Lift
landing doors which are tested in accordance with EN 1634-1 are classified in accordance with
7.5.5.Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7.
2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.EN 1363-2, Fire resistance tests - Part 2: Alternative and additional procedures
EN 1364-1:2015, Fire resistance tests for non-loadbearing elements - Part 1: Walls
EN 1364-2:1999, Fire resistance tests for non-loadbearing elements — Part 2: Ceilings
EN 1364-3, Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full
configuration (complete assembly)EN 1364-4, Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part
configurationEN 1364-5:2017, Fire resistance tests for non-loadbearing elements - Part 5: Air transfer grilles
EN 1365-1:2012, Fire resistance tests for loadbearing elements - Part 1: WallsEN 1365-2:2014, Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
EN 1365-3, Fire resistance tests for loadbearing elements - Part 3: BeamsEN 1365-4, Fire resistance tests for loadbearing elements - Part 4: Columns
EN 1365-5, Fire resistance tests for loadbearing elements - Part 5: Balconies and walkways
---------------------- Page: 10 ----------------------oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
EN 1365-6, Fire resistance tests for loadbearing elements - Part 6: Stairs
EN 1366-3, Fire resistance tests for service installations - Part 3: Penetration seals
EN 1366-4, Fire resistance tests for service installations - Part 4: Linear joint seals
EN 1366-5, Fire resistance tests for service installations - Part 5: Service ducts and shafts
EN 1366-6, Fire resistance tests for service installations - Part 6: Raised access and hollow core floors
EN 1366-7:2004, Fire resistance tests for service installations - Part 7: Conveyor systems and their
closuresEN 1443:2019, Chimneys - General requirements
EN 1634-1:2014, Fire resistance and smoke control tests for door and shutter assemblies, openable
windows and elements of building hardware — Part 1: Fire resistance test for door and shutter
assemblies and openable windowsEN 1634-3:2004, Fire resistance and smoke control tests for door and shutter assemblies, openable
windows and elements of building hardware - Part 3: Smoke control test for door and shutter
assembliesEN 13216-1:2019, Chimneys - Test methods for system chimneys - Part 1: General test methods
EN 13381-1, Test methods for determining the contribution to the fire resistance of structural
members - Part 1: Horizontal protective membranesEN 13381-2, Test methods for determining the contribution to the fire resistance of structural
members - Part 2: Vertical protective membranesEN 13381-3, Test methods for determining the contribution to the fire resistance of structural
members - Part 3: Applied protection to concrete membersEN 13381-4, Test methods for determining the contribution to the fire resistance of structural
members - Part 4: Applied passive protection to steel membersEN 13381-5, Test methods for determining the contribution to the fire resistance of structural
members - Part 5: Applied protection to concrete/profiled sheet steel composite member
EN 13381-6, Test methods for determining the contribution to the fire resistance of structural
members - Part 6: Applied protection to concrete filled hollow steel columnsENV 13381-7, Test methods for determining the contribution to the fire resistance of structural
members — Part 7: Applied protection to timber membersEN 13381-8, Test methods for determining the contribution to the fire resistance of structural
members - Part 8: Applied reactive protection to steel membersEN 13381-9, Test methods for determining the contribution to the fire resistance of structural
members - Part 9: Applied fire protection systems to steel beams with web openings
EN 14135, Coverings - Determination of fire protection ability---------------------- Page: 11 ----------------------
oSIST prEN 13501-2:2021
prEN 13501-2:2021(E)
EN 15080-8, Extended application of results from fire resistance tests - Part 8: Beams
EN 15080-12, Extended application of results from fire resistance tests - Part 12: Loadbearing
masonry wallsEN 15254-2, Extended application of results from fire resistance tests - Non-loadbearing walls - Part 2:
Masonry and Gypsum BlocksEN 15254-4, Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4:
Glazed constructionsEN 15254-3, Extended application of results from fire resistance tests - Non-loadbearing walls - Part 3:
Lightweight partitionsEN 15254-5, Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5:
Metal sandwich panel constructionEN 15254-6, Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6:
Curtain wallingEN 15254-7, Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part
7: Metal sandwich panel constructionEN 15269-1, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies, including their elements of building hardware - Part 1:
General requirementsEN 15269-2, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire
resistance of hinged and pivoted steel doorsetsEN 15269-3, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies, including their elements of building hardware - Part 3: Fire
resistance of hinged and pivoted timber doorsets and openable timber framed windows
EN 15269-5, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies, including their elements of building hardware — Part 5: Fire
resistance of hinged and pivoted metal framed glazed doorsets and openable windows
prEN 15269-6, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies, including their elements of building hardware — Part 6: Fire
resistance of sliding timber doorsetsEN 15269-7, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies, including their elements of building hardware - Part 7: Fire
resistance for steel sliding doorsetsEN 15269-10, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies including their elements of building hardware - Part 10: Fire
resistance of steel rolling shutter assembliesprEN 15269-11, Extended application of test results for fire resistance and/or smoke control for door,
shutter and openable window assemblies, including their elements of building hardware —
Part 11: Fire resistance for operable fabric curtains---------------------- Page: 12 ----------------------
oSIST prEN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.