Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz - Part 4: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Metering devices operating in designated band 169,400 MHz to 169,475 MHz

The present document specifies technical characteristics and methods of measurements for Metering Devices category
equipment types:
• Metering devices category is defined by the EU Commission Decision 2013/752/EU [i.2] as:
"The metering device category covers radio devices that are part of bidirectional radio communications
systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures,
such as electricity, gas and water".
The present document covers equipment intended for fixed, mobile or nomadic use, e.g.:
• stand-alone radio equipment;
• plug-in radio devices intended for use with or within a variety of host systems;
• plug-in radio devices intended for use within combined equipment.

Naprave kratkega dosega (SRD), ki delujejo v frekvenčnem območju od 25 MHz do 1000 MHz - 4. del: Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU - Merilna oprema, ki deluje na namenjenem pasu od 169,400 MHz do 169,475 MHz

Ta dokument določa tehnične karakteristike in merilne metode za vrste opreme v kategoriji merilne opreme:
• kategorija merilne opreme je z odločbo Komisije 2013/752/EU [i.2] opredeljena kot:
»Kategorija merilne opreme zajema radijske naprave, ki so del sistemov za dvosmerno radijsko komunikacijo, kar omogoča oddaljeno spremljanje, merjenje in prenos podatkov v infrastrukturah pametnih omrežij, kot so elektrika, plin in voda.«
Ta dokument obravnava opremo, namenjeno za fiksno, mobilno in nomadsko uporabo, npr.:
• samostojno radijsko opremo;
• vtične radijske naprave za uporabo z različnimi gostiteljskimi sistemi ali v njih;
• vtične radijske naprave za uporabo v sestavljenih sistemih.

General Information

Status
Published
Public Enquiry End Date
31-Jul-2016
Publication Date
27-Feb-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Feb-2017
Due Date
20-Apr-2017
Completion Date
28-Feb-2017

Buy Standard

Standard
SIST EN 300 220-4 V1.1.1:2017
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Standard
ETSI EN 300 220-4 V1.1.1 (2017-02) - Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz
English language
21 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 300 220-4 V1.1.1 (2016-11) - Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz
English language
21 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ETSI EN 300 220-4 V1.1.0 (2016-05) - Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz
English language
21 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz - Part 4: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU - Metering devices operating in designated band 169,400 MHz to 169,475 MHz33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:ETSI EN 300 220-4 V1.1.1 (2017-02)SIST EN 300 220-4 V1.1.1:2017en01-april-2017SIST EN 300 220-4 V1.1.1:2017SLOVENSKI

STANDARD
SIST EN 300 220-4 V1.1.1:2017

ETSI EN 300 220-4 V1.1.1 (2017-02) Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Metering devices operating in designated band 169,400 MHz to 169,475 MHz

HARMONISED EUROPEAN STANDARD SIST EN 300 220-4 V1.1.1:2017
ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 2

Reference DEN/ERM-TG28-538 Keywords harmonised standard, radio, SRD, testing ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88

Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017. All rights reserved.

DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 3 Contents Intellectual Property Rights ................................................................................................................................ 5 Foreword ............................................................................................................................................................. 5 Modal verbs terminology .................................................................................................................................... 5 Introduction ........................................................................................................................................................ 6 1 Scope ........................................................................................................................................................ 7 2 References ................................................................................................................................................ 7 2.1 Normative references ......................................................................................................................................... 7 2.2 Informative references ........................................................................................................................................ 7 3 Definitions, symbols and abbreviations ................................................................................................... 8 3.1 Definitions .......................................................................................................................................................... 8 3.2 Symbols .............................................................................................................................................................. 8 3.3 Abbreviations ..................................................................................................................................................... 8 4 Technical requirements specifications ..................................................................................................... 8 4.1 Environmental profile ......................................................................................................................................... 8 4.2 All equipment conformance requirements ......................................................................................................... 8 4.2.0 Compliance ................................................................................................................................................... 8 4.2.1 Operating frequency ..................................................................................................................................... 9 4.2.1.0 Applicability............................................................................................................................................ 9 4.2.1.1 Description .............................................................................................................................................. 9 4.2.1.2 Limits ...................................................................................................................................................... 9 4.2.1.3 Conformance ........................................................................................................................................... 9 4.2.2 Unwanted emissions in the spurious domain ................................................................................................ 9 4.2.2.0 Applicability............................................................................................................................................ 9 4.2.2.1 Description .............................................................................................................................................. 9 4.2.2.2 Limits ...................................................................................................................................................... 9 4.2.2.3 Conformance ........................................................................................................................................... 9 4.3 Transmitters conformance requirements ............................................................................................................ 9 4.3.1 Effective Radiated Power ............................................................................................................................. 9 4.3.1.0 Applicability............................................................................................................................................ 9 4.3.1.1 Description .............................................................................................................................................. 9 4.3.1.2 Limits ...................................................................................................................................................... 9 4.3.1.3 Conformance ......................................................................................................................................... 10 4.3.2 Duty Cycle .................................................................................................................................................. 10 4.3.2.0 Applicability.......................................................................................................................................... 10 4.3.2.1 Description ............................................................................................................................................ 10 4.3.2.2 Limits .................................................................................................................................................... 10 4.3.2.3 Conformance ......................................................................................................................................... 10 4.3.3 Occupied Bandwidth................................................................................................................................... 10 4.3.3.0 Applicability.......................................................................................................................................... 10 4.3.3.1 Description ............................................................................................................................................ 10 4.3.3.2 Limits .................................................................................................................................................... 10 4.3.3.3 Conformance ......................................................................................................................................... 10 4.3.4 TX Out Of Band Emissions ........................................................................................................................ 10 4.3.4.0 Applicability.......................................................................................................................................... 10 4.3.4.1 Description ............................................................................................................................................ 10 4.3.4.2 Limits .................................................................................................................................................... 11 4.3.4.3 Conformance ......................................................................................................................................... 11 4.3.5 Transient power .......................................................................................................................................... 11 4.3.5.0 Applicability.......................................................................................................................................... 11 4.3.5.1 Description ............................................................................................................................................ 11 4.3.5.2 Limits .................................................................................................................................................... 11 4.3.5.3 Conformance ......................................................................................................................................... 11 4.3.6 Adjacent Channel Power ............................................................................................................................ 11 4.3.6.0 Applicability.......................................................................................................................................... 11 SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 4 4.3.6.1 Description ............................................................................................................................................ 11 4.3.6.2 Limits .................................................................................................................................................... 11 4.3.6.3 Conformance ......................................................................................................................................... 12 4.3.7 TX behaviour under Low Voltage Conditions ............................................................................................ 12 4.3.7.0 Applicability.......................................................................................................................................... 12 4.3.7.1 Description ............................................................................................................................................ 12 4.3.7.2 Limits .................................................................................................................................................... 12 4.3.7.3 Conformance ......................................................................................................................................... 12 4.4 Receivers conformance requirements ............................................................................................................... 12 4.4.1 RX sensitivity ............................................................................................................................................. 12 4.4.1.0 Applicability.......................................................................................................................................... 12 4.4.1.1 Description ............................................................................................................................................ 12 4.4.1.2 Limits .................................................................................................................................................... 12 4.4.1.3 Conformance ......................................................................................................................................... 12 4.4.2 Blocking ...................................................................................................................................................... 12 4.4.2.0 Applicability.......................................................................................................................................... 12 4.4.2.1 Description ............................................................................................................................................ 13 4.4.2.2 Limits .................................................................................................................................................... 13 4.4.2.3 Conformance ......................................................................................................................................... 13 4.4.3 Clear Channel Assessment threshold .......................................................................................................... 13 4.4.3.0 Applicability.......................................................................................................................................... 13 4.4.3.1 Description ............................................................................................................................................ 13 4.4.3.2 Limits .................................................................................................................................................... 13 4.4.3.3 Conformance ......................................................................................................................................... 13 4.4.4 Polite spectrum access timing parameters .................................................................................................. 13 4.4.4.0 Applicability.......................................................................................................................................... 13 4.4.4.1 Description ............................................................................................................................................ 13 4.4.4.2 Limits .................................................................................................................................................... 13 4.4.4.3 Conformance ......................................................................................................................................... 13 Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU ......................................................... 14 Annex B (normative): EU designated frequency bands for metering equipment .......................... 15 Annex C (informative): Application form for testing .......................................................................... 16 C.0 Introduction ............................................................................................................................................ 16 C.1 Information as required by ETSI EN 300 220-4 .................................................................................... 16 Annex D (informative): Selection of technical parameters ................................................................. 18 D.1 Introduction ............................................................................................................................................ 18 D.2 Receiver parameters ............................................................................................................................... 18 Annex E (informative): Bibliography ................................................................................................... 19 Annex F (informative): Change History .............................................................................................. 20 History .............................................................................................................................................................. 21

SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https://ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC [i.1]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1]. For non EU countries the present document may be used for regulatory (Type Approval) purposes.

National transposition dates Date of adoption of this EN: 27 January 2017 Date of latest announcement of this EN (doa): 30 April 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e):

31 October 2017 Date of withdrawal of any conflicting National Standard (dow): 31 October 2018

Modal verbs terminology In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and "cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). "must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation. SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 6 Introduction The present document is part 4 of a multi-part deliverable covering Metering devices in the designated frequency range 169,400 MHz to 169,475 MHz. The present document is structured as follows: Clause 2 provides references. Clause 3 provides definitions of terms and abbreviations used. Clause 4 provides technical requirements. Annex A (informative): provides relationship between the present document and essential requirements of Directive 2014/53/EU [i.1]. Annex B (normative): EU designated frequency bands for metering equipment. Annex C (informative): Application form for testing. Annex D (informative): Selection of parameters. Annex E (informative): Bibliography. Annex F (informative): Change History. SIST EN 300 220-4 V1.1.1:2017

ETSI ETSI EN 300 220-4 V1.1.1 (2017-02) 7 1 Scope The present document specifies technical characteristics and methods of measurements for Metering Devices category equipment types: • Met

...

ETSI EN 300 220-4 V1.1.1 (2017-02)
HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential
requirements of article 3.2 of Directive 2014/53/EU;
Metering devices operating in
designated band 169,400 MHz to 169,475 MHz
---------------------- Page: 1 ----------------------
2 ETSI EN 300 220-4 V1.1.1 (2017-02)
Reference
DEN/ERM-TG28-538
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2017.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.

ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 300 220-4 V1.1.1 (2017-02)
Contents

Intellectual Property Rights ................................................................................................................................ 5

Foreword ............................................................................................................................................................. 5

Modal verbs terminology .................................................................................................................................... 5

Introduction ........................................................................................................................................................ 6

1 Scope ........................................................................................................................................................ 7

2 References ................................................................................................................................................ 7

2.1 Normative references ......................................................................................................................................... 7

2.2 Informative references ........................................................................................................................................ 7

3 Definitions, symbols and abbreviations ................................................................................................... 8

3.1 Definitions .......................................................................................................................................................... 8

3.2 Symbols .............................................................................................................................................................. 8

3.3 Abbreviations ..................................................................................................................................................... 8

4 Technical requirements specifications ..................................................................................................... 8

4.1 Environmental profile ......................................................................................................................................... 8

4.2 All equipment conformance requirements ......................................................................................................... 8

4.2.0 Compliance ................................................................................................................................................... 8

4.2.1 Operating frequency ..................................................................................................................................... 9

4.2.1.0 Applicability............................................................................................................................................ 9

4.2.1.1 Description .............................................................................................................................................. 9

4.2.1.2 Limits ...................................................................................................................................................... 9

4.2.1.3 Conformance ........................................................................................................................................... 9

4.2.2 Unwanted emissions in the spurious domain ................................................................................................ 9

4.2.2.0 Applicability............................................................................................................................................ 9

4.2.2.1 Description .............................................................................................................................................. 9

4.2.2.2 Limits ...................................................................................................................................................... 9

4.2.2.3 Conformance ........................................................................................................................................... 9

4.3 Transmitters conformance requirements ............................................................................................................ 9

4.3.1 Effective Radiated Power ............................................................................................................................. 9

4.3.1.0 Applicability............................................................................................................................................ 9

4.3.1.1 Description .............................................................................................................................................. 9

4.3.1.2 Limits ...................................................................................................................................................... 9

4.3.1.3 Conformance ......................................................................................................................................... 10

4.3.2 Duty Cycle .................................................................................................................................................. 10

4.3.2.0 Applicability.......................................................................................................................................... 10

4.3.2.1 Description ............................................................................................................................................ 10

4.3.2.2 Limits .................................................................................................................................................... 10

4.3.2.3 Conformance ......................................................................................................................................... 10

4.3.3 Occupied Bandwidth................................................................................................................................... 10

4.3.3.0 Applicability.......................................................................................................................................... 10

4.3.3.1 Description ............................................................................................................................................ 10

4.3.3.2 Limits .................................................................................................................................................... 10

4.3.3.3 Conformance ......................................................................................................................................... 10

4.3.4 TX Out Of Band Emissions ........................................................................................................................ 10

4.3.4.0 Applicability.......................................................................................................................................... 10

4.3.4.1 Description ............................................................................................................................................ 10

4.3.4.2 Limits .................................................................................................................................................... 11

4.3.4.3 Conformance ......................................................................................................................................... 11

4.3.5 Transient power .......................................................................................................................................... 11

4.3.5.0 Applicability.......................................................................................................................................... 11

4.3.5.1 Description ............................................................................................................................................ 11

4.3.5.2 Limits .................................................................................................................................................... 11

4.3.5.3 Conformance ......................................................................................................................................... 11

4.3.6 Adjacent Channel Power ............................................................................................................................ 11

4.3.6.0 Applicability.......................................................................................................................................... 11

ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 300 220-4 V1.1.1 (2017-02)

4.3.6.1 Description ............................................................................................................................................ 11

4.3.6.2 Limits .................................................................................................................................................... 11

4.3.6.3 Conformance ......................................................................................................................................... 12

4.3.7 TX behaviour under Low Voltage Conditions ............................................................................................ 12

4.3.7.0 Applicability.......................................................................................................................................... 12

4.3.7.1 Description ............................................................................................................................................ 12

4.3.7.2 Limits .................................................................................................................................................... 12

4.3.7.3 Conformance ......................................................................................................................................... 12

4.4 Receivers conformance requirements ............................................................................................................... 12

4.4.1 RX sensitivity ............................................................................................................................................. 12

4.4.1.0 Applicability.......................................................................................................................................... 12

4.4.1.1 Description ............................................................................................................................................ 12

4.4.1.2 Limits .................................................................................................................................................... 12

4.4.1.3 Conformance ......................................................................................................................................... 12

4.4.2 Blocking ...................................................................................................................................................... 12

4.4.2.0 Applicability.......................................................................................................................................... 12

4.4.2.1 Description ............................................................................................................................................ 13

4.4.2.2 Limits .................................................................................................................................................... 13

4.4.2.3 Conformance ......................................................................................................................................... 13

4.4.3 Clear Channel Assessment threshold .......................................................................................................... 13

4.4.3.0 Applicability.......................................................................................................................................... 13

4.4.3.1 Description ............................................................................................................................................ 13

4.4.3.2 Limits .................................................................................................................................................... 13

4.4.3.3 Conformance ......................................................................................................................................... 13

4.4.4 Polite spectrum access timing parameters .................................................................................................. 13

4.4.4.0 Applicability.......................................................................................................................................... 13

4.4.4.1 Description ............................................................................................................................................ 13

4.4.4.2 Limits .................................................................................................................................................... 13

4.4.4.3 Conformance ......................................................................................................................................... 13

Annex A (informative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 14

Annex B (normative): EU designated frequency bands for metering equipment .......................... 15

Annex C (informative): Application form for testing .......................................................................... 16

C.0 Introduction ............................................................................................................................................ 16

C.1 Information as required by ETSI EN 300 220-4 .................................................................................... 16

Annex D (informative): Selection of technical parameters ................................................................. 18

D.1 Introduction ............................................................................................................................................ 18

D.2 Receiver parameters ............................................................................................................................... 18

Annex E (informative): Bibliography ................................................................................................... 19

Annex F (informative): Change History .............................................................................................. 20

History .............................................................................................................................................................. 21

ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 300 220-4 V1.1.1 (2017-02)
Intellectual Property Rights

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Foreword

This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic

compatibility and Radio spectrum Matters (ERM).

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Directive 1999/5/EC [i.1].

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated

EFTA regulations.

The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

For non EU countries the present document may be used for regulatory (Type Approval) purposes.

National transposition dates
Date of adoption of this EN: 27 January 2017
Date of latest announcement of this EN (doa): 30 April 2017
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 31 October 2017
Date of withdrawal of any conflicting National Standard (dow): 31 October 2018
Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 300 220-4 V1.1.1 (2017-02)
Introduction

The present document is part 4 of a multi-part deliverable covering Metering devices in the designated frequency range

169,400 MHz to 169,475 MHz.
The present document is structured as follows:
Clause 2 provides references.
Clause 3 provides definitions of terms and abbreviations used.
Clause 4 provides technical requirements.

Annex A (informative): provides relationship between the present document and essential requirements of Directive

2014/53/EU [i.1].
Annex B (normative): EU designated frequency bands for metering equipment.
Annex C (informative): Application form for testing.
Annex D (informative): Selection of parameters.
Annex E (informative): Bibliography.
Annex F (informative): Change History.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 300 220-4 V1.1.1 (2017-02)
1 Scope

The present document specifies technical characteristics and methods of measurements for Metering Devices category

equipment types:

• Metering devices category is defined by the EU Commission Decision 2013/752/EU [i.2] as:

"The metering device category covers radio devices that are part of bidirectional radio communications

systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures,

such as electricity, gas and water".

The present document covers equipment intended for fixed, mobile or nomadic use, e.g.:

• stand-alone radio equipment;

• plug-in radio devices intended for use with or within a variety of host systems;

• plug-in radio devices intended for use within combin
...

Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential
requirements of article 3.2 of Directive 2014/53/EU;
Metering devices operating in
designated band 169,400 MHz to 169,475 MHz
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
Reference
DEN/ERM-TG28-538
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.

ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
Contents

Intellectual Property Rights ................................................................................................................................ 5

Foreword ............................................................................................................................................................. 5

Modal verbs terminology .................................................................................................................................... 5

Introduction ........................................................................................................................................................ 6

1 Scope ........................................................................................................................................................ 7

2 References ................................................................................................................................................ 7

2.1 Normative references ......................................................................................................................................... 7

2.2 Informative references ........................................................................................................................................ 7

3 Definitions, symbols and abbreviations ................................................................................................... 8

3.1 Definitions .......................................................................................................................................................... 8

3.2 Symbols .............................................................................................................................................................. 8

3.3 Abbreviations ..................................................................................................................................................... 8

4 Technical requirements specifications ..................................................................................................... 8

4.1 Environmental profile ......................................................................................................................................... 8

4.2 All equipment conformance requirements ......................................................................................................... 8

4.2.0 Compliance ................................................................................................................................................... 8

4.2.1 Operating frequency ..................................................................................................................................... 9

4.2.1.0 Applicability............................................................................................................................................ 9

4.2.1.1 Description .............................................................................................................................................. 9

4.2.1.2 Limits ...................................................................................................................................................... 9

4.2.1.3 Conformance ........................................................................................................................................... 9

4.2.2 Unwanted emissions in the spurious domain ................................................................................................ 9

4.2.2.0 Applicability............................................................................................................................................ 9

4.2.2.1 Description .............................................................................................................................................. 9

4.2.2.2 Limits ...................................................................................................................................................... 9

4.2.2.3 Conformance ........................................................................................................................................... 9

4.3 Transmitters conformance requirements ............................................................................................................ 9

4.3.1 Effective Radiated Power ............................................................................................................................. 9

4.3.1.0 Applicability............................................................................................................................................ 9

4.3.1.1 Description .............................................................................................................................................. 9

4.3.1.2 Limits ...................................................................................................................................................... 9

4.3.1.3 Conformance ......................................................................................................................................... 10

4.3.2 Duty Cycle .................................................................................................................................................. 10

4.3.2.0 Applicability.......................................................................................................................................... 10

4.3.2.1 Description ............................................................................................................................................ 10

4.3.2.2 Limits .................................................................................................................................................... 10

4.3.2.3 Conformance ......................................................................................................................................... 10

4.3.3 Occupied Bandwidth................................................................................................................................... 10

4.3.3.0 Applicability.......................................................................................................................................... 10

4.3.3.1 Description ............................................................................................................................................ 10

4.3.3.2 Limits .................................................................................................................................................... 10

4.3.3.3 Conformance ......................................................................................................................................... 10

4.3.4 TX Out Of Band Emissions ........................................................................................................................ 10

4.3.4.0 Applicability.......................................................................................................................................... 10

4.3.4.1 Description ............................................................................................................................................ 10

4.3.4.2 Limits .................................................................................................................................................... 11

4.3.4.3 Conformance ......................................................................................................................................... 11

4.3.5 Transient power .......................................................................................................................................... 11

4.3.5.0 Applicability.......................................................................................................................................... 11

4.3.5.1 Description ............................................................................................................................................ 11

4.3.5.2 Limits .................................................................................................................................................... 11

4.3.5.3 Conformance ......................................................................................................................................... 11

4.3.6 Adjacent Channel Power ............................................................................................................................ 11

4.3.6.0 Applicability.......................................................................................................................................... 11

ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)

4.3.6.1 Description ............................................................................................................................................ 11

4.3.6.2 Limits .................................................................................................................................................... 11

4.3.6.3 Conformance ......................................................................................................................................... 12

4.3.7 TX behaviour under Low Voltage Conditions ............................................................................................ 12

4.3.7.0 Applicability.......................................................................................................................................... 12

4.3.7.1 Description ............................................................................................................................................ 12

4.3.7.2 Limits .................................................................................................................................................... 12

4.3.7.3 Conformance ......................................................................................................................................... 12

4.4 Receivers conformance requirements ............................................................................................................... 12

4.4.1 RX sensitivity ............................................................................................................................................. 12

4.4.1.0 Applicability.......................................................................................................................................... 12

4.4.1.1 Description ............................................................................................................................................ 12

4.4.1.2 Limits .................................................................................................................................................... 12

4.4.1.3 Conformance ......................................................................................................................................... 12

4.4.2 Blocking ...................................................................................................................................................... 12

4.4.2.0 Applicability.......................................................................................................................................... 12

4.4.2.1 Description ............................................................................................................................................ 13

4.4.2.2 Limits .................................................................................................................................................... 13

4.4.2.3 Conformance ......................................................................................................................................... 13

4.4.3 Clear Channel Assessment threshold .......................................................................................................... 13

4.4.3.0 Applicability.......................................................................................................................................... 13

4.4.3.1 Description ............................................................................................................................................ 13

4.4.3.2 Limits .................................................................................................................................................... 13

4.4.3.3 Conformance ......................................................................................................................................... 13

4.4.4 Polite spectrum access timing parameters .................................................................................................. 13

4.4.4.0 Applicability.......................................................................................................................................... 13

4.4.4.1 Description ............................................................................................................................................ 13

4.4.4.2 Limits .................................................................................................................................................... 13

4.4.4.3 Conformance ......................................................................................................................................... 13

Annex A (informative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 14

Annex B (normative): EU designated frequency bands for metering equipment .......................... 15

Annex C (informative): Application form for testing .......................................................................... 16

C.0 Introduction ............................................................................................................................................ 16

C.1 Information as required by ETSI EN 300 220-4 .................................................................................... 16

Annex D (informative): Selection of technical parameters ................................................................. 18

D.1 Introduction ............................................................................................................................................ 18

D.2 Other receiver parameters ...................................................................................................................... 18

Annex E (informative): Bibliography ................................................................................................... 19

Annex F (informative): Change History .............................................................................................. 20

History .............................................................................................................................................................. 21

ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
Intellectual Property Rights

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Foreword

This final draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee

Electromagnetic compatibility and Radio spectrum Matters (ERM), and is now submitted for the Vote phase of the

ETSI standards EN Approval Procedure.

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Directive 1999/5/EC [i.1].

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated

EFTA regulations.

The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

For non EU countries the present document may be used for regulatory (Type Approval) purposes.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa

Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
Introduction

The present document is part 4 of a multi-part deliverable covering Metering devices in the designated frequency range

169,400 MHz to 169,475 MHz.
The present document is structured as follows:
• Clause 2 provides references.
• Clause 3 provides definitions of terms and abbreviations used.
• Clause 4 provides technical requirements.

• Annex A (informative): provides relationship between the present document and essential requirements of

Directive 2014/53/EU [i.1].
• Annex B (normative): EU designated frequency bands for metering equipment.
• Annex C (informative): Application form for testing.
• Annex D (informative): Selection of parameters.
• Annex E (informative): Bibliography.
• Annex F (informative): Change History.
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI EN 300 220-4 V1.1.1 (2016-11)
1 Scope

The present document specifies technical characteristics and methods of measurements for Metering Devices category

equipment types:

• Metering devices category is defined by the EU Commission Decision 2013/752/EU [i.2] as:

"The metering device category covers radio devices that are part of bidirectional radio communications

systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures,

such as electricity, gas and water".

The present document covers equipment intended for fixed, mobile or nomadic use, e.g.:

• stand-alone radio equipment;
...

Draft ETSI EN 300 220-4 V1.1.0 (2016-05)
HARMONISED EUROPEAN STANDARD
Short Range Devices (SRD) operating
in the frequency range 25 MHz to 1 000 MHz;
Part 4: Harmonised Standard covering the essential
requirements of article 3.2 of the Directive 2014/53/EU;
Metering devices operating in
designated band 169,400 MHz to 169,475 MHz
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 300 220-4 V1.1.0 (2016-05)
Reference
DEN/ERM-TG28-538
Keywords
harmonised standard, radio, SRD, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search

The present document may be made available in electronic versions and/or in print. The content of any electronic and/or

print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any

existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the

print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.

Users of the present document should be aware that the document may be subject to revision or change of status.

Information on the current status of this and other ETSI documents is available at

https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx

If you find errors in the present document, please send your comment to one of the following services:

https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification

No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

and microfilm except as authorized by written permission of ETSI.

The content of the PDF version shall not be modified without the written authorization of ETSI.

The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2016.
All rights reserved.
TM TM TM

DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.

3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and

of the 3GPP Organizational Partners.

GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.

ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 300 220-4 V1.1.0 (2016-05)
Contents

Intellectual Property Rights ................................................................................................................................ 5

Foreword ............................................................................................................................................................. 5

Modal verbs terminology .................................................................................................................................... 5

Introduction ........................................................................................................................................................ 6

1 Scope ........................................................................................................................................................ 7

2 References ................................................................................................................................................ 7

2.1 Normative references ......................................................................................................................................... 7

2.2 Informative references ........................................................................................................................................ 7

3 Definitions, symbols and abbreviations ................................................................................................... 8

3.1 Definitions .......................................................................................................................................................... 8

3.2 Symbols .............................................................................................................................................................. 8

3.3 Abbreviations ..................................................................................................................................................... 8

4 Technical requirements specifications ..................................................................................................... 8

4.1 Environmental profile ......................................................................................................................................... 8

4.2 All equipment conformance requirements ......................................................................................................... 8

4.2.0 Compliance ................................................................................................................................................... 8

4.2.1 Operating frequency ..................................................................................................................................... 8

4.2.1.1 Description .............................................................................................................................................. 8

4.2.1.2 Limits ...................................................................................................................................................... 8

4.2.1.3 Conformance ........................................................................................................................................... 9

4.2.2 Unwanted emissions in the spurious domain ................................................................................................ 9

4.2.2.1 Description .............................................................................................................................................. 9

4.2.2.2 Limits ...................................................................................................................................................... 9

4.2.2.3 Conformance ........................................................................................................................................... 9

4.3 Transmitters conformance requirements ............................................................................................................ 9

4.3.1 Effective Radiated Power ............................................................................................................................. 9

4.3.1.0 Applicability............................................................................................................................................ 9

4.3.1.1 Description .............................................................................................................................................. 9

4.3.1.2 Limits ...................................................................................................................................................... 9

4.3.1.3 Conformance ........................................................................................................................................... 9

4.3.2 Duty Cycle .................................................................................................................................................... 9

4.3.2.0 Applicability............................................................................................................................................ 9

4.3.2.1 Description .............................................................................................................................................. 9

4.3.2.2 Limits ...................................................................................................................................................... 9

4.3.2.3 Conformance ........................................................................................................................................... 9

4.3.3 Occupied Bandwidth................................................................................................................................... 10

4.3.3.0 Applicability.......................................................................................................................................... 10

4.3.3.1 Description ............................................................................................................................................ 10

4.3.3.2 Limits .................................................................................................................................................... 10

4.3.3.3 Conformance ......................................................................................................................................... 10

4.3.4 TX Out Of Band Emissions ........................................................................................................................ 10

4.3.4.0 Applicability.......................................................................................................................................... 10

4.3.4.1 Description ............................................................................................................................................ 10

4.3.4.2 Limits .................................................................................................................................................... 10

4.3.4.3 Conformance ......................................................................................................................................... 10

4.3.5 Transient power .......................................................................................................................................... 10

4.3.5.0 Applicability.......................................................................................................................................... 10

4.3.5.1 Description ............................................................................................................................................ 10

4.3.5.2 Limits .................................................................................................................................................... 10

4.3.5.3 Conformance ......................................................................................................................................... 10

4.3.6 Adjacent Channel Power ............................................................................................................................ 11

4.3.6.0 Applicability.......................................................................................................................................... 11

4.3.6.1 Description ............................................................................................................................................ 11

4.3.6.2 Limits for equipment with operating channel width less than 25 kHz .................................................. 11

ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 300 220-4 V1.1.0 (2016-05)

4.3.6.3 Conformance ......................................................................................................................................... 11

4.3.7 TX behaviour under Low Voltage Conditions ............................................................................................ 11

4.3.7.0 Applicability.......................................................................................................................................... 11

4.3.7.1 Description ............................................................................................................................................ 11

4.3.7.2 Limits .................................................................................................................................................... 11

4.3.7.3 Conformance ......................................................................................................................................... 11

4.4 Receivers conformance requirements ............................................................................................................... 11

4.4.1 RX sensitivity ............................................................................................................................................. 11

4.4.1.0 Applicability.......................................................................................................................................... 11

4.4.1.1 Description ............................................................................................................................................ 11

4.4.1.2 Limits .................................................................................................................................................... 11

4.5.1.3 Conformance ......................................................................................................................................... 11

4.4.2 Blocking ...................................................................................................................................................... 12

4.4.2.0 Applicability.......................................................................................................................................... 12

4.4.2.1 Description ............................................................................................................................................ 12

4.4.5.2 Limits .................................................................................................................................................... 12

4.4.5.3 Conformance ......................................................................................................................................... 12

4.4.3 Clear Channel Assessment threshold .......................................................................................................... 12

4.4.3.0 Applicability.......................................................................................................................................... 12

4.4.3.1 Description ............................................................................................................................................ 12

4.4.3.2 Limits .................................................................................................................................................... 12

4.4.3.3 Conformance ......................................................................................................................................... 12

4.4.4 Polite spectrum access ................................................................................................................................ 12

4.4.4.0 Applicability.......................................................................................................................................... 12

4.4.4.1 Description ............................................................................................................................................ 12

4.4.4.2 Limits .................................................................................................................................................... 12

4.4.4.3 Conformance ......................................................................................................................................... 12

Annex A (normative): Relationship between the present document and the essential

requirements of Directive 2014/53/EU ......................................................... 13

Annex B (normative): EU designated frequency bands for metering equipment .......................... 15

Annex C (informative): Application form for testing .......................................................................... 16

C.1 Information as required by ETSI EN 300 220-4 .................................................................................... 16

Annex D (informative): Selection of technical parameters ................................................................. 18

D.1 Introduction ............................................................................................................................................ 18

D.2 Other receiver parameters ...................................................................................................................... 18

Annex E (informative): Bibliography ................................................................................................... 19

Annex F (informative): Change History .............................................................................................. 20

History .............................................................................................................................................................. 21

ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 300 220-4 V1.1.0 (2016-05)
Intellectual Property Rights

IPRs essential or potentially essential to the present document may have been declared to ETSI. The information

pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found

in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in

respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web

server (https://ipr.etsi.org/).

Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee

can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web

server) which are, or may be, or may become, essential to the present document.
Foreword

This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic

compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote

phase of the ETSI standards EN Approval Procedure.

The present document has been prepared under the Commission's standardisation request C(2015) 5376 final [i.4] to

provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation

of the laws of the Member States relating to the making available on the market of radio equipment and repealing

Directive 1999/5/EC [i.1].

Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with

the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present

document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated

EFTA regulations.

The present document is part 4 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].

For non EU countries the present document may be used for regulatory (Type Approval) purposes.

Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa

Date of withdrawal of any conflicting National Standard (dow): 18 months after doa

Modal verbs terminology

In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and

"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of

provisions).

"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.

ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 300 220-4 V1.1.0 (2016-05)
Introduction

The present document is part 4 of a multi-part deliverable covering Metering devices in the designated frequency range

169,400 MHz to 169,475 MHz.
The present document is structured as follows:
• Clause 2 provides references.
• Clause 3 provides definitions of terms and abbreviations used.
• Clause 4 provides technical requirements.

• Annex A (normative): provides relationship between the present document and essential requirements of

Directive 2014/53/EU [i.1].
• Annex B (normative): EU designated frequency bands for metering equipment.
• Annex C (informative): Application form for testing.
• Annex D (informative): Selection of parameters.
• Annex E (informative): Bibliography.
• Annex F (informative): Change History.
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 300 220-4 V1.1.0 (2016-05)
1 Scope
The present document applies to Metering Devices category equipment types:

• Metering devices category is defined by the EU Commission Decision 2013/752/EU [i.1] as:

"The metering device category covers radio devices that are part of bidirectional radio communications

systems which allow remote monitoring, measuring and transmission of data in smart grid infrastructures,

such as electricity, gas and water".

The present document covers equipment intended for fixed, mobile or nomadic use, e.g.:

• stand-alone radio equipment;

• plug-in radio devices intended for use with or within a variety of host systems;

• plug-in radio devices intended for use within combined equipment.
These radio equipment types are capabl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.