Intelligent transport systems - Cooperative systems - Globally unique identification (ISO 17419:2018)

This document
— describes and specifies globally unique addresses and identifiers (ITS-S object identifiers) which
are both internal and external to ITS stations and are used for ITS station management,
— describes how ITS-S object identifiers and related technical parameters are used for classification,
registration and management of ITS applications and ITS application classes,
— describes how ITS-S object identifiers are used in the ITS communication protocol stack,
— introduces an organizational framework for registration and management of ITS-S objects,
— defines and specifies management procedures at a high functional level,
— is based on the architecture of an ITS station specified in ISO 21217:2014 as a Bounded Secured
Managed Domain (BSMD),
— specifies an ASN.1 module for the identifiers, addresses, and registry records identified in this
document, and
— specifies an ASN.1 module for a C-ITS Data Dictionary containing ASN.1 type definitions of general
interest.

Intelligente Verkehrssysteme - Kooperative ITS - Klassifikation und Steuerung von ITS Anwendungen im globalen Zusammenhang (ISO 17419:2018)

Systèmes intelligents de transport - Classification et gestion des applications de systèmes intelligents de transport dans un contexte global (ISO 17419:2018)

This document
—          describes and specifies globally unique addresses and identifiers (ITS-S object identifiers) which are both internal and external to ITS stations and are used for ITS station management,
—          describes how ITS-S object identifiers and related technical parameters are used for classification, registration and management of ITS applications and ITS application classes,
—          describes how ITS-S object identifiers are used in the ITS communication protocol stack,
—          introduces an organizational framework for registration and management of ITS-S objects,
—          defines and specifies management procedures at a high functional level,
—          is based on the architecture of an ITS station specified in ISO 21217:2014 as a Bounded Secured Managed Domain (BSMD),
—          specifies an ASN.1 module for the identifiers, addresses, and registry records identified in this document, and
—          specifies an ASN.1 module for a C-ITS Data Dictionary containing ASN.1 type definitions of general interest.

Inteligentni transportni sistemi - Kooperativni sistemi - Globalna enotna identifikacija (ISO 17419:2018)

Ta dokument:
– opisuje in določa globalne enotne naslove in identifikatorje (identifikatorje objektov ITS-S), ki so notranji in zunanji postajam ITS ter se uporabljajo za upravljanje postaje ITS,
– opisuje, kako se identifikatorji objektov ITS-S in povezani tehnični parametri uporabljajo za razvrstitev, registracijo in upravljanje aplikacij ITS in razredov aplikacij ITS,
– opisuje, kako se identifikatorji objektov ITS-S uporabljajo v skladu komunikacijskih protokolov ITS,
– predstavlja organizacijski okvir za registracijo in upravljanje objektov ITS-S,
– opredeljuje in določa postopke upravljanja na visoki funkcionalni ravni,
– temelji na arhitekturi postaje ITS, določeni v standardu ISO 21217:2014 kot omejena varovana upravljana domena (BSMD),
– določa modul ASN.1 za identifikatorje, naslove in zapise registra, identificirane v tem dokumentu, ter
– določa modul ASN.1 za podatkovni slovar C-ITS, ki vsebuje opredelitve vrste ASN.1 splošnega
pomena.

General Information

Status
Published
Public Enquiry End Date
30-Jul-2017
Publication Date
20-Aug-2018
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jul-2018
Due Date
07-Sep-2018
Completion Date
21-Aug-2018

Relations

Buy Standard

Standard
EN ISO 17419:2018
English language
55 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 17419:2017
English language
64 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17419:2018
01-september-2018
1DGRPHãþD
SIST-TS CEN ISO/TS 17419:2014
Inteligentni transportni sistemi - Kooperativni sistemi - Globalna enotna
identifikacija (ISO 17419:2018)
Intelligent transport systems - Cooperative systems - Globally unique identification (ISO
17419:2018)
Intelligente Verkehrssysteme - Kooperative ITS - Klassifikation und Steuerung von ITS
Anwendungen im globalen Zusammenhang (ISO 17419:2018)
Systèmes intelligents de transport - Classification et gestion des applications de
systèmes intelligents de transport dans un contexte global (ISO 17419:2018)
Ta slovenski standard je istoveten z: EN ISO 17419:2018
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST EN ISO 17419:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17419:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 17419:2018


EN ISO 17419
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2018
EUROPÄISCHE NORM
ICS 03.220.20; 35.240.60 Supersedes CEN ISO/TS 17419:2014
English Version

Intelligent transport systems - Cooperative systems -
Globally unique identification (ISO 17419:2018)
Systèmes intelligents de transport - Systèmes Intelligente Verkehrssysteme - Kooperative ITS -
coopératifs - Identification unique au niveau global Klassifikation und Steuerung von ITS Anwendungen im
(ISO 17419:2018) globalen Zusammenhang (ISO 17419:2018)
This European Standard was approved by CEN on 9 June 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17419:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17419:2018
EN ISO 17419:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17419:2018
EN ISO 17419:2018 (E)
European foreword
This document (EN ISO 17419:2018) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2018, and conflicting national standards
shall be withdrawn at the latest by December 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 17419:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17419:2018 has been approved by CEN as EN ISO 17419:2018 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 17419:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 17419:2018
INTERNATIONAL ISO
STANDARD 17419
First edition
2018-05
Intelligent transport systems —
Cooperative systems — Globally
unique identification
Systèmes intelligents de transport — Systèmes coopératifs —
Identification unique au niveau global
Reference number
ISO 17419:2018(E)
©
ISO 2018

---------------------- Page: 7 ----------------------

SIST EN ISO 17419:2018
ISO 17419:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 17419:2018
ISO 17419:2018(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Symbols and abbreviated terms . 4
5 Management issues . 6
5.1 General . 6
5.2 ITS communications architecture . 7
5.3 PKI architecture . 7
5.4 Regulations and policies . 7
5.5 ITS station . 8
5.5.1 ITS station architecture. 8
5.5.2 Instantiations of an ITS station . 9
5.6 Applications and messages . 9
5.6.1 ITS application . 9
5.6.2 ITS application class .10
5.6.3 ITS message sets .10
5.7 Communications .10
5.7.1 Addressing in the communication protocol stack.10
5.7.2 ITS-S management.11
5.7.3 ITS-S Security .11
5.8 Identifiers and addresses summary .11
6 GCMA organizational framework .13
6.1 Overview .13
6.2 Registration of globally unique identifiers .13
6.3 Certification of ITS-S equipment .14
6.4 Certification of ITS-S application processes .15
6.5 Issuance of ITS-SCU credentials .16
6.6 Issuance of certificates for real-time operation .17
6.7 ITS application repository . .17
6.8 Secure installation and maintenance of facilities and communication protocols.18
6.9 Registries .18
6.9.1 General.18
6.9.2 ITS application objects.18
6.9.3 ITS message sets .18
6.9.4 ITS regulatory regions . . .19
6.9.5 ITS policy regions .19
6.9.6 ITS port numbers .20
6.9.7 ITS flow types .20
6.9.8 ITS logical channels .20
6.9.9 ITS station units .20
6.9.10 ITS station communication units .20
6.9.11 ITS-S application process provisioner.21
6.9.12 ITS-S equipment manufacturers .21
6.9.13 ITS application object owners .21
6.9.14 ITS message set owners .21
6.9.15 ITS-S application process developers .22
6.9.16 ITS-S facility layer services .22
6.9.17 ITS-SCU configuration management centres .22
6.9.18 ITS communication protocol stacks .22
6.9.19 ITS protocol identifier .23
© ISO 2018 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 17419:2018
ISO 17419:2018(E)

6.9.20 IANA registries.23
6.9.21 IEEE registries .23
6.10 Wrong behaviour reporting .24
7 GCMA technical framework .24
7.1 Addresses and identifiers .24
7.1.1 Overview .24
7.1.2 ITS-AID .24
7.1.3 ITS-SAPID .25
7.1.4 ITS-MsgSetID .25
7.1.5 ITS-PN .25
7.1.6 ITS-FlowTypeID .26
7.1.7 ITS-LCHID .26
7.1.8 ITS-SUID .27
7.1.9 ITS-SCUID .27
7.1.10 ITS-S-APPID .27
7.1.11 ITS-RRID.27
7.1.12 ITS-PRID .27
7.1.13 ITS-SEMID .28
7.1.14 ITS-AOOID .28
7.1.15 ITS-ATT .28
7.1.16 ITS-MSOID .28
7.1.17 ITS-SAPIID .29
7.1.18 ITS-S-APDID .29
7.1.19 ITS-SAPSSID .29
7.1.20 ITS-SecAlgID .30
7.1.21 ITS-S-FSID .30
7.1.22 ITS-SCU-CMCID .30
7.1.23 ITS-ProtStckID .30
7.1.24 ITS-ProtID .30
7.2 Online management .30
7.2.1 Secure installation and maintenance of ITS-S application processes .30
7.2.2 Secure installation of ITS-S protocols and control functions .30
7.2.3 Registration of ITS-S application processes with the ITS-S management entity .31
7.2.4 Data flow management .31
7.2.5 Management of certificates for real-time communications . .31
7.2.6 Exception reporting.31
Annex A (normative) ASN.1 modules .32
Annex B (informative) ITS-AID allocation request template .43
Bibliography .45
iv © ISO 2018 – All rights reserved

---------------------- Page: 10 ----------------------

SIST EN ISO 17419:2018
ISO 17419:2018(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/iso/foreword .html.
This document was prepared by ISO/TC 204, Intelligent transport systems.
This first edition cancels and replaces ISO/TS 17419:2014, which has been technically revised to become
an International Standard.
© ISO 2018 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST EN ISO 17419:2018
ISO 17419:2018(E)

Introduction
Classification and management of ITS applications in a global context covers more than just the ITS
applications themselves. It also covers elements of the environment in which ITS applications are
instantiated.
Intelligent Transport Systems (ITS) provide ITS services to users by execution of ITS applications which
typically requires communications between ITS station application processes residing in ITS station
units (ITS-SU). Communications includes messages dedicated to ITS applications, and messages from
ITS message sets.
[20]
Following the definition in TS 102 860 , ITS applications and ITS application classes are referred
to as ITS application objects. ITS application objects are uniquely identified by the registered “ITS
Application Identifier” (ITS-AID) specified in this document.
NOTE 1 An ITS application class groups ITS applications together that provide the same type of service, e.g.
“Electronic Fee Collection” (EFC), but operate in different contexts. Prior to start of service provisioning the
applicable context is negotiated. The definition of ITS application classes is based on the concept of the DSRC
[7]
Application entity as introduced in ISO 15628 , which is identified by a DSRCApplicationEntityID; negotiation of
the applicable context is performed by BST/VST exchange.
[20]
In ETSI TS 102 860 , ITS message sets were referred to as ITS application objects. This definition is
not adopted in this document due to the very different nature of ITS message sets and ITS application
objects. ITS message sets are uniquely identified by the registered “ITS Message Set Identifier” (ITS-
MsgSetID) specified in this document.
[20]
This document is an extension towards more general and global applicability of ETSI TS 102 860 .
This document introduces the term “ITS-S object” as a general reference to ITS application objects, ITS
message sets and other objects which may require globally unique identification and registration.
NOTE 2 Examples of other ITS-S objects are ITS-S communication protocols and ITS-S security protocols.
[9]–[12][14] [2]
Management of ITS-S objects is specified in the ISO 24102 series (all parts) and in ISO 17423 .
This document focuses on some management aspects related to authorized and controlled operation of
ITS-S objects, which requires considerations of ITS-S object identifiers, e.g. ITS-AID, ITS-MsgSetID, ITS-
SUID, ITS-SCUID, addresses and protocol identifiers used in the communication protocol stack of an
ITS-S, and others.
This document replaces ISO/TS 17419 without change of scope.
vi © ISO 2018 – All rights reserved

---------------------- Page: 12 ----------------------

SIST EN ISO 17419:2018
INTERNATIONAL STANDARD ISO 17419:2018(E)
Intelligent transport systems — Cooperative systems —
Globally unique identification
1 Scope
This document
— describes and specifies globally unique addresses and identifiers (ITS-S object identifiers) which
are both internal and external to ITS stations and are used for ITS station management,
— describes how ITS-S object identifiers and related technical parameters are used for classification,
registration and management of ITS applications and ITS application classes,
— describes how ITS-S object identifiers are used in the ITS communication protocol stack,
— introduces an organizational framework for registration and management of ITS-S objects,
— defines and specifies management procedures at a high functional level,
— is based on the architecture of an ITS station specified in ISO 21217:2014 as a Bounded Secured
Managed Domain (BSMD),
— specifies an ASN.1 module for the identifiers, addresses, and registry records identified in this
document, and
— specifies an ASN.1 module for a C-ITS Data Dictionary containing ASN.1 type definitions of general
interest.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO/IEC 8824-1:2015, Information technology — Abstract Syntax Notation One (ASN.1): Specification of
basic notation — Part 1
ISO 21217:2014, Intelligent transport systems — Communications access for land mobiles (CALM) —
Architecture
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 21217:2014 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
...

SLOVENSKI STANDARD
oSIST prEN ISO 17419:2017
01-julij-2017
Inteligentni transportni sistemi - Kooperativni sistemi - Globalna enotna
identifikacija (ISO/DIS 17419:2017)
Intelligent transport systems - Cooperative systems - Globally unique identification
(ISO/DIS 17419:2017)
Intelligente Verkehrssysteme - Kooperative ITS - Klassifikation und Steuerung von ITS
Anwendungen im globalen Zusammenhang (ISO/DIS 17419:2017)
Systèmes intelligents de transport - Classification et gestion des applications de
systèmes intelligents de transport dans un contexte global (ISO/DIS 17419:2017)
Ta slovenski standard je istoveten z: prEN ISO 17419
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
oSIST prEN ISO 17419:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17419:2017

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17419:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17419
ISO/TC 204 Secretariat: ANSI
Voting begins on: Voting terminates on:
2017-05-23 2017-08-14
Intelligent transport systems — Cooperative systems —
Globally unique
identification
Titre manque
ICS: 35.240.60; 03.220.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17419:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E) ©ISO2017–Allrightsreserved

ISO/TC204/SC
Date: 2017-01-4
ISO/DIS17419:2017(E)
ISO/TC204/SC/WG18
Secretariat: ANSI
Intelligenttransportsystems—Cooperativesystems—Globallyunique
identification
Élémentintroductif—Élémentcentral—Élémentcomplémentaire
Warning
ThisdocumentisnotanISOInternationalStandard.Itisdistributedforreviewandcomment.Itis
subjecttochangewithoutnoticeandmaynotbereferredtoasanInternationalStandard.
Recipientsofthisdraftareinvitedtosubmit,withtheircomments,notificationofanyrelevantpatent
rightsofwhichtheyareawareandtoprovidesupportingdocumentation.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
Documenttype: InternationalStandard
CH-1214 Vernier, Geneva, Switzerland
Documentsubtype:
Tel. +41 22 749 01 11
Documentstage: (40)Enquiry
Fax +41 22 749 09 47
Documentlanguage: E
copyright@iso.org
www.iso.org
C:\Daten\Aktuelles
Jahr\ESF\Projekte\ISO\TC204\WG18\DT2\EN_ISO17419_IDs\EN_ISO_DIS_17419_(E)_2017-01-
ii © ISO 2017 – All rights reserved
04.doc STDVersion2.8f

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E)
Contents Page
Foreword.v
Introduction. vi
1 Scope .1
2 Normative references .1
3 Terms and definitions.2
4 Symbols and abbreviated terms.6
5 Management issues.8
5.1 Introduction.8
5.2 ITS communications architecture .9
5.3 PKI architecture .10
5.4 Regulations and policies .10
5.5 ITS station.10
5.5.1 ITS station architecture.10
5.5.2 Instantiations of an ITS station.12
5.5.3 Owners and users of an ITS station.12
5.6 Applications and messages .12
5.6.1 ITS application.12
5.6.2 ITS application class .12
5.6.3 ITS message sets.13
5.7 Communications .13
5.7.1 Addressing in the communication protocol stack .13
5.7.2 ITS-S management.14
5.7.3 ITS-S Security .14
5.8 Identifiers and addresses summary .14
6 GCMA organizational framework.17
6.1 Overview.17
6.2 Registration of globally unique identifiers .17
6.3 Certification of ITS-S equipment .19
6.4 Certification of ITS-S application processes.20
6.5 Issuance of ITS-SCU credentials.20
6.6 Issuance of certificates for real-time operation .21
6.7 ITS application repository.22
6.8 Secure installation and maintenance of facilities and communication protocols .22
6.9 Registries.22
6.9.1 General .22
6.9.2 ITS application objects.22
6.9.3 ITS message sets.23
6.9.4 ITS regulatory regions .23
6.9.5 ITS policy regions .24
6.9.6 ITS port numbers.25
6.9.7 ITS flow types .25
6.9.8 ITS logical channels.25
6.9.9 ITS station units .25
6.9.10 ITS station communication units .26
6.9.11 ITS-S application process provisioner .26
© ISO 2017 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E)
6.9.12 ITS-S equipment manufacturers. 26
6.9.13 ITS application object owners . 27
6.9.14 ITS message set owners . 27
6.9.15 ITS-S application process developers. 27
6.9.16 ITS-S facility layer services. 28
6.9.17 ITS-SCU configuration management centres. 28
6.9.18 ITS communication protocol stacks . 28
6.9.19 ITS protocol identifier. 29
6.9.20 IANA registries . 29
6.9.21 IEEE registries . 29
6.10 Wrong behaviour reporting . 30
7 GCMA technical framework . 31
7.1 Addresses and identifiers . 31
7.1.1 Overview . 31
7.1.2 ITS-AID . 31
7.1.3 ITS-SAPID . 32
7.1.4 ITS-MsgSetID. 32
7.1.5 ITS-PN. 33
7.1.6 ITS-FlowTypeID . 33
7.1.7 ITS-LCHID. 34
7.1.8 ITS-SUID. 35
7.1.9 ITS-SCUID . 35
7.1.10 ITS-S-APPID . 35
7.1.11 ITS-RRID . 35
7.1.12 ITS-PRID . 35
7.1.13 ITS-SEMID. 35
7.1.14 ITS-AOOID . 35
7.1.15 ITS-ATT . 36
7.1.16 ITS-MSOID. 36
7.1.17 ITS-SAPIID. 37
7.1.18 ITS-S-APDID. 37
7.1.19 ITS-SAPSSID. 38
7.1.20 ITS-SecAlgID. 38
7.1.21 ITS-SU-UID . 38
7.1.22 ITS-S-FSID. 38
7.1.23 ITS-SCU-CMCID . 38
7.1.24 ITS-ProtStckID. 38
7.1.25 ITS-ProtID . 38
7.2 Online management . 39
7.2.1 Secure installation and maintenance of ITS-S application processes. 39
7.2.2 Secure installation of ITS-S protocols and control functions . 39
7.2.3 Registration of ITS-S application processes with the ITS-S management . 39
7.2.4 Data flow management . 39
7.2.5 Management of certificates for real-time communications . 39
7.2.6 Exception reporting . 40
Annex A (normative) ASN.1 modules. 41
A.1 Overview . 41
A.2 Module CITSdataDictionary1. 41
A.3 Module CITSapplMgmtApplReg . 46
Annex B (informative) ITS-AID allocation request template. 55
Bibliography. 57
iv © ISO 2017 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national
standards bodies (ISO member bodies). The work of preparing International Standards is normally
carried out through ISO technical committees. Each member body interested in a subject for which a
technical committee has been established has the right to be represented on that committee.
International organizations, governmental and non-governmental, in liaison with ISO, also take part in
the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO's adherence to the World Trade Organization (WTO)
principles in the Technical Barriers to Trade (TBT) see the following URL:
www.iso.org/iso/foreword.html.
The committee responsible for this document is ISO/XXX
This second/third/. edition cancels and replaces the first/second/. edition (), [clause(s) /
subclause(s) / table(s) / figure(s) / annex(es)] of which [has / have] been technically revised.
ISO XXXX consists of the following parts. [Add information as necessary.]
© ISO 2017 – All rights reserved v

---------------------- Page: 7 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E)
Introduction
Classification and management of ITS applications in a global context covers more than just the ITS
applications themselves. It also covers elements of the environment in which ITS applications are
instantiated.
Intelligent Transport Systems (ITS) provide ITS services to users by execution of ITS applications which
typically requires communications between ITS station application processes residing in ITS station
units (ITS-SU). Communications includes messages dedicated to ITS applications, and messages from
ITS message sets.
Following the definition in TS 102 860 [20], ITS applications and ITS application classes are referred to
as ITS application objects. ITS application objects are uniquely identified by the registered "ITS
Application Identifier" (ITS-AID) specified in this document.
NOTE An ITS application class groups ITS applications together that provide the same type of service, e.g.
"Electronic Fee Collection" (EFC), but operate in different contexts. Prior to start of service provisioning the
applicable context is negotiated. The definition of ITS application classes is based on the concept of the DSRC
Application entity as introduced in ISO 15628 [7], which is identified by a DSRCApplicationEntityID; negotiation of
the applicable context is performed by BST/VST exchange.
In ETSI TS 102 860 [20], ITS message sets were referred to as ITS application objects. This definition is
not adopted in this document due to the very different nature of ITS message sets and ITS application
objects. ITS message sets are uniquely identified by the registered "ITS Message Set Identifier" (ITS-
MsgSetID) specified in this document.
This document is an extension towards more general and global applicability of ETSI TS 102 860 [20].
This document introduces the term "ITS-S object" as a general reference to ITS application objects, ITS
message sets and other objects which may require globally unique identification and registration.
NOTE Examples of other ITS-S objects are ITS-S communication protocols and ITS-S security protocols.
Management of ITS-S objects is specified in the set of documents ISO 24102 Parts 1 to 6 [9, 10, 11, 12,
13, 14], and in the document EN/ISO 17423 [2]. This document focuses on some management aspects
related to authorized and controlled operation of ITS-S objects, which requires considerations of ITS-S
object identifiers, e.g. ITS-AID, ITS-MsgSetID, ITS-SUID, ITS-SCUID, addresses and protocol identifiers
used in the communication protocol stack of an ITS-S, and others.
This document replaces the CEN/ISO Technical Specification TS 17419 without change of scope.
vi © ISO 2017 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 17419:2017
DRAFT INTERNATIONAL STANDARD ISO/DIS 17419:2017(E)
Intelligent transport systems — Cooperative systems —
Globally unique identification
1 Scope
This document
 describes and specifies globally unique addresses and identifiers (ITS-S object identifiers) which
are both internal and external to ITS stations and are used for ITS station management,
 describes how ITS-S object identifiers and related technical parameters are used for classification,
registration and management of ITS applications and ITS application classes,
 describes how ITS-S object identifiers are used in the ITS communication protocol stack,
 introduces an organizational framework for registration and management of ITS-S objects,
 defines and specifies management procedures at a high functional level,
 is based on the architecture of an ITS station specified in ISO 21217:2014 as a Bounded Secured
Managed Domain (BSMD),
 specifies an ASN.1 module for the identifiers, addresses, and registry records identified in this
International standard,
 specifies an ASN.1 module for a C-ITS Data Dictionary containing ASN.1 type definitions of general
interest.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 21217:2014, Intelligent Transport Systems – Communications access for land mobiles (CALM) –
Architecture
ISO/IEC 8824-1:2008: "Information technology – Abstract Syntax Notation One (ASN.1): Specification of
basic notation"
© ISO 2017 – All rights reserved 1

---------------------- Page: 9 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 21217:2014 and the following
apply.
3.1
authorization
prescription that a particular behaviour shall not be prevented
NOTE Unlike a permission, an authorization is an empowerment.
NOTE From [21]
3.2
ITS application
instantiation of an ITS service that involves an association of two or more complementary ITS-S
application processes
NOTE From ISO 21217:2014
3.3
ITS application class
ITS application with mutually exclusive characteristics designed for operation in different contexts
NOTE Introduced in ISO 15628 and ISO 24102-5
3.4
ITS application identifier
globally unique, registered number identifying an ITS application object
3.5
ITS application object
ITS application and ITS application class identified by a globally unique ITS application identifier (ITS-
AID)
3.6
ITS message
message designed for an ITS-related purpose
3.7
ITS message set
set of uniquely identified ITS messages
NOTE From ISO 21217:2014
3.8
ITS message set identifier
globally unique, registered number identifying an ITS message set
3.9
ITS protocol stack identifier
globally unique, registered number identifying a non-parameterized communications protocol stack
2 © ISO 2017 – All rights reserved

---------------------- Page: 10 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E)
3.10
ITS registration authority
entity authorized to register ITS-S object identifiers
3.11
ITS service
functionality provided to users of intelligent transport systems designed e.g. to increase safety,
sustainability, efficiency, and comfort
NOTE From ISO 21217:2014
3.12
ITS trusted authority
entity authorized to issue ITS-S object security credentials
3.13
ITS-S application process
element in an ITS station that performs information processing for a particular application, and may use
ITS-S services to transmit and receive information
NOTE From ISO 21217:2014
3.14
ITS-S application process provisioner
functionality in an ITS-SU offering ITS-S application processes for download and installation to other
ITS-SUs
3.15
ITS-S communication protocol
protocol used in a communication protocol stack of an ITS-S
3.16
ITS-S communication protocol stack
consistent set of ITS-S communication protocols enabling communications between an ITS-SCU and
other nodes which may be identified by a registered globally unique reference number
NOTE From EN/ISO 17423 [2]
3.17
ITS-SCU configuration management centre
entity that retains information about capabilities of ITS-SCUs, status of objects in ITS-SCUs, and
supports management and update of this information
3.18
ITS-S object
entity used in ITS related to ITS-S management that may require a globally unique identifier
NOTE Examples of ITS-S objects include ITS-SU, ITS-SCU, ITS application object, ITS message set, ITS-S
communication protocol, ITS flow type
3.19
ITS-S object identifier
an identifier of an ITS-S object
© ISO 2017 – All rights reserved 3

---------------------- Page: 11 ----------------------
oSIST prEN ISO 17419:2017
ISO/DIS 17419:2017(E)
3.20
ITS-S object owner
entity responsible for the specification (design), maintenance and registration of an ITS-S object
3.21
ITS-S service
communication functionality of an ITS-S that provides the capability to connect to other nodes
NOTE From ISO 21217:2014
3.22
ITS-S unit
implementation of an ITS station
NOTE From ISO 21217:2014
3.23
permission
rule that a particular behaviour is allowed to occur
NOTE From ITU-T X.911 [21]
3.24
policy
set of rules related to a particular purpose, expressed as an obligation, an authorization, a permission or
a prohibition
NOTE From ITU-T X.911 [21]
3.25
prohibition
prescription that a particular behaviour shall not occur
NOTE From ITU-T X.911 [21]
3.26
registration
assignment of an u
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.