SIST EN 15051-1:2014
(Main)Workplace exposure - Measurement of dustiness of bulk materials - Part 1: Requirements and choice of test methods
Workplace exposure - Measurement of dustiness of bulk materials - Part 1: Requirements and choice of test methods
This European Standard specifies the environmental conditions, the sample handling and analytical procedures and the method of calculating and presenting the results. Reasons are given for the need for more than one method and advice is given on the choice of method to be used.
This European Standard establishes a classification scheme for dustiness to provide a standardised way to express and communicate the results to users of the bulk materials. Details of the scheme for each method are given in EN 15051 2 and EN 15051 3.
This European Standard is applicable to powdered, granular or pelletized bulk materials.
This European Standard is not applicable to test the dust released during mechanical reduction of solid bulk materials (e.g. cut, crushed) or to test application procedures for the bulk materials.
Figure 1 gives a flow chart to provide the user of this European Standard a route through the necessary stages that need to be taken to obtain values of the dustiness of a given bulk material.
Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern - Teil 1: Anforderungen und Auswahl der Prüfverfahren
Diese Europäische Norm legt die Umgebungsbedingungen, den Umgang mit den Proben und die Analyseverfahren sowie die Verfahren zur Berechnung und Darstellung der Ergebnisse fest. Es wird begründet, warum mehr als ein Verfahren benötigt wird, und es wird Hilfestellung bei der Auswahl des Verfahrens gegeben.
Diese Europäische Norm stellt ein Klassifikationssystem für das Staubungsverhalten auf, um eine genormte Grundlage für die Angabe und Weiterleitung der Ergebnisse an die Anwender von Schüttgütern zu schaffen. Einzelheiten zu dem System für die einzelnen Verfahren sind in EN 15051-2 und EN 15051-3 enthalten.
Diese Europäische Norm gilt für pulverförmige, granulierte oder pelletierte Schüttgüter.
Diese Europäische Norm gilt weder für die Prüfung von Staub, der bei der mechanischen Zerkleinerung fester Schüttgüter (z. B. beim Schneiden, Brechen) freigesetzt wird, noch für die Prüfung der Anwendungsverfahren von Schüttgütern.
Bild 1 zeigt ein Ablaufdiagramm, das dem Anwender dieser Europäischen Norm verdeutlichen soll, welche Stufen bei der Ermittlung von Werten zum Staubungsverhalten eines bestimmen Schüttguts durchlaufen werden müssen.
Exposition sur les lieux de travail - Mesure du pouvoir de resuspension des matériaux pulvérulents en vrac - Partie 1: Exigences and selection des méthodes d'essai
La présente Norme européenne spécifie également les conditions ambiantes, les méthodes de manipulation et d'analyse des échantillons ainsi que la méthode de calcul et d'expression des résultats. Le besoin de disposer de plusieurs méthodes est justifié et des conseils sont donnés sur la sélection de la méthode.
La présente Norme européenne établit une méthode de classification du pouvoir de resuspension, afin de normaliser le mode d'expression et de communication des résultats aux utilisateurs des matériaux en vrac. Des détails concernant cette classification sont donnés, pour chaque méthode, dans l’EN 15051-2 et l’EN 15051-3.
La présente Norme européenne s’applique aux matériaux en vrac granulaires, en poudre ou sous forme de pastilles.
La présente Norme européenne ne s’applique pas à la détermination de l’empoussièrement dû à la réduction mécanique (par exemple découpe, concassage) de matériaux solides en vrac ni à l’évaluation des méthodes d’application des matériaux en vrac.
La Figure 1 présente un diagramme pour aider l’utilisateur de la présente Norme européenne à repérer les étapes qu’il est nécessaire de suivre pour obtenir les valeurs du pouvoir de resuspension d’un matériau en vrac donné.
Izpostavljenost na delovnem mestu - Meritve prašnosti razsutih materialov - 1. del: Zahteve in izbira preskusnih metod
Ta evropski standard navaja okoljske pogoje, ravnanje z vzorci in analitične postopke ter metodo izračuna in predstavitve rezultatov. Podani so razlogi za navedbo več metod in nasveti v zvezi z izbiro uporabljene metode. Ta evropski standard uvaja razvrstitveno shemo prašnosti za zagotovitev standardiziranega načina izražanja in sporočanja rezultatov uporabnikom razsutih materialov. Shematske podrobnosti za vsako metodo so podane v standardih EN 15051-2 in EN 15051-3. Ta evropski standard se uporablja za razsute materiale v prahu, granulah in peletih. Ta evropski standard se ne uporablja za preskušanje sproščanja prahu med mehanskim zmanjševanjem trdnih razsutih materialov (npr. rezanje, drobljenje) ali za preskušanje postopkov uporabe razsutih materialov. Slika 1 je diagram poteka, ki uporabniku tega standarda prikazuje posamezne stopnje za pridobitev vrednosti prašnosti določenega razsutega materiala.
General Information
Relations
Frequently Asked Questions
SIST EN 15051-1:2014 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Workplace exposure - Measurement of dustiness of bulk materials - Part 1: Requirements and choice of test methods". This standard covers: This European Standard specifies the environmental conditions, the sample handling and analytical procedures and the method of calculating and presenting the results. Reasons are given for the need for more than one method and advice is given on the choice of method to be used. This European Standard establishes a classification scheme for dustiness to provide a standardised way to express and communicate the results to users of the bulk materials. Details of the scheme for each method are given in EN 15051 2 and EN 15051 3. This European Standard is applicable to powdered, granular or pelletized bulk materials. This European Standard is not applicable to test the dust released during mechanical reduction of solid bulk materials (e.g. cut, crushed) or to test application procedures for the bulk materials. Figure 1 gives a flow chart to provide the user of this European Standard a route through the necessary stages that need to be taken to obtain values of the dustiness of a given bulk material.
This European Standard specifies the environmental conditions, the sample handling and analytical procedures and the method of calculating and presenting the results. Reasons are given for the need for more than one method and advice is given on the choice of method to be used. This European Standard establishes a classification scheme for dustiness to provide a standardised way to express and communicate the results to users of the bulk materials. Details of the scheme for each method are given in EN 15051 2 and EN 15051 3. This European Standard is applicable to powdered, granular or pelletized bulk materials. This European Standard is not applicable to test the dust released during mechanical reduction of solid bulk materials (e.g. cut, crushed) or to test application procedures for the bulk materials. Figure 1 gives a flow chart to provide the user of this European Standard a route through the necessary stages that need to be taken to obtain values of the dustiness of a given bulk material.
SIST EN 15051-1:2014 is classified under the following ICS (International Classification for Standards) categories: 13.040.30 - Workplace atmospheres. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 15051-1:2014 has the following relationships with other standards: It is inter standard links to SIST EN 15051:2006, SIST EN 15051-1:2026. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN 15051-1:2014 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Izpostavljenost na delovnem mestu - Meritve prašnosti razsutih materialov - 1. del: Zahteve in izbira preskusnih metodExposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern - Teil 1: Anforderungen und Auswahl der PrüfverfahrenExposition sur les lieux de travail - Mesure du pouvoir de resuspension des matériaux pulvérulents en vrac - Partie 1: Exigences and selection des méthodes d'essaiWorkplace exposure - Measurement of dustiness of bulk materials - Part 1: Requirements and choice of test methods13.040.30Kakovost zraka na delovnem mestuWorkplace atmospheresICS:Ta slovenski standard je istoveten z:EN 15051-1:2013SIST EN 15051-1:2014en,fr,de01-julij-2014SIST EN 15051-1:2014SLOVENSKI
STANDARDSIST EN 15051:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15051-1
November 2013 ICS 13.040.30 Supersedes EN 15051:2006English Version
Workplace exposure - Measurement of the dustiness of bulk materials - Part 1: Requirements and choice of test methods
Exposition sur les lieux de travail - Mesure du pouvoir de resuspension des matériaux pulvérulents en vrac - Partie 1: Exigences et choix des méthodes d'essai
Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern - Teil 1: Anforderungen und Auswahl der Prüfverfahren This European Standard was approved by CEN on 28 September 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15051-1:2013: ESIST EN 15051-1:2014
Determination of moisture content. 13 A.1 Infrared dryer method . 13 A.1.1 Principle . 13 A.1.2 Procedure . 13 A.2 Alternative method . 13 Annex B (normative)
Determination of bulk density of the test material . 15 B.1 Equipment . 15 B.2 Special requirements . 15 B.3 Procedure . 15 Bibliography . 16
Figure 1 — Flow chart to show how EN 15051 is used to measure the dustiness of a bulk material SIST EN 15051-1:2014
...
記事のタイトル：SIST EN 15051-1:2014 - 作業場における露出 - 粉塵発生の測定 - 第1部：要件と試験方法の選択 記事の内容：このヨーロッパ標準は、環境条件、サンプルの取り扱いと分析手順、計算と結果の表示方法を規定しています。複数の方法が必要な理由が示され、使用する方法の選択に関するアドバイスが提供されています。このヨーロッパ標準には、粉塵発生の結果を大量の材料のユーザーに統一された方法で表現し、伝えるための分類スキームが設定されています。各方法のスキームの詳細については、EN 15051-2およびEN 15051-3で説明されています。このヨーロッパ標準は、粉末、粒状またはペレット状の大量材料に適用されます。ただし、この標準は、固体の大量材料の機械的な削減中に放出される粉塵をテストすることや、大量材料の適用手順をテストすることは適用されません。図1は、このヨーロッパ標準のユーザーが特定の大量材料の粉塵発生の値を取得するために必要な手順を示すフローチャートを提供しています。
The article discusses the European Standard EN 15051-1:2014, which outlines the measurement of dustiness of bulk materials in the workplace. It specifies the environmental conditions, sample handling and analytical procedures, and methods for calculating and presenting the results. The article highlights the need for multiple testing methods and provides advice on choosing the appropriate method. A classification scheme is established to standardize the expression and communication of dustiness results to users of bulk materials. However, the standard does not apply to testing dust released during mechanical reduction of solid bulk materials or to testing application procedures for bulk materials. The article also includes a flow chart that outlines the necessary steps for obtaining values of the dustiness of a particular bulk material.
기사 제목: SIST EN 15051-1:2014 - 작업장 노출 - 대량 물질의 먼지 발생 측정 - 제1부: 요구사항 및 시험 방법 선택 기사 내용: 이 유럽 표준은 환경 조건, 샘플 처리 및 분석 절차, 계산 및 결과 표시 방법을 명시합니다. 두 개 이상의 방법이 필요한 이유가 제시되며, 사용할 방법 선택에 대한 조언이 제공됩니다. 이 유럽 표준은 대량 물질의 먼지 발생에 대한 표준화된 표현 및 결과의 사용자에게 통신하기 위한 분류 체계를 설정합니다. 각 방법에 대한 체계의 세부 사항은 EN 15051-2 및 EN 15051-3에서 제공됩니다. 이 유럽 표준은 분말, 입자 상태 또는 펠렛화된 대량 물질에 적용됩니다. 이 유럽 표준은 고체 대량 물질의 기계적 축소 과정(예: 절단, 분쇄)에서 발생하는 먼지 농도를 테스트하지 않으며, 대량 물질의 적용 절차를 테스트하지 않습니다. 도표 1은 사용자가 해당 대량 물질의 먼지 발생 측정 값을 얻기 위해 필요한 단계를 표시하는 플로우 차트를 제공합니다.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...