SIST EN 60454-3-7:2002

• Abstract:

  Contains the requirements for 4 types of pressure-sensitive tapes made of polyimide film. Products having nominal thicknesses from 0,020 mm to 0,055 mm, thermal indices from 155 to 180 with acrylic crosslinked and silicone thermosetting adhesives.

• Status: Published
• Publication Date: 30-Sep-2002
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IZO - Insulating materials
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2002
• Due Date: 01-Oct-2002
• Completion Date: 01-Oct-2002
• Ref Project: EN 60454-3-7:1998 - Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Polyimide film tapes with pressure-sensitive adhesive

• Refers: SIST EN 60454-2:1998 - Specifications for pressure-sensitive adhesive tapes for electrical purposes -- Part 2: Methods of test
• Effective Date: 03-Feb-2026
• Refers: SIST EN 60454-1:1998 - Specifications for pressure-sensitive adhesive tapes for electrical purposes -- Part 1: General requirements
• Effective Date: 03-Feb-2026

SIST EN 60454-3-7:2002 is the Slovenian standard published by SIST for pressure-sensitive adhesive tapes for electrical purposes. It specifies polyimide film tapes with pressure-sensitive adhesive, covering four tape types for users who need a defined material specification for electrical insulation and procurement.

The standard is aligned with EN 60454-3-7:1998 and IEC 60454-3-7:1998. In practice, it gives manufacturers, buyers, and quality teams a common basis for identifying this tape family and checking whether a product fits the stated material class.

What does SIST EN 60454-3-7:2002 specify?

SIST EN 60454-3-7:2002 specifies requirements for four types of pressure-sensitive adhesive tapes made of polyimide film. It is a focused product specification within Part 3 of the series, so it is meant for selecting and checking individual materials rather than describing the whole series in general terms.

The scope ties the tapes to electrical use and defines the main material limits by thickness, thermal index, and adhesive system. That matters because these are the properties a purchaser or test laboratory will usually need to match to a design or an incoming-inspection plan.

What are the key requirements of SIST EN 60454-3-7:2002?

SIST EN 60454-3-7:2002 covers four product types, so users need to choose among a small, defined set rather than treating all polyimide adhesive tapes as interchangeable. This helps procurement and quality control align on a single product class before testing or ordering.

The standard covers tapes with nominal thicknesses from 0,020 mm to 0,055 mm. In practice, thickness is one of the first values to verify because it affects fit, insulation build-up, and consistency from batch to batch.

It also covers thermal indices from 155 to 180. For readers, that means the tape is intended for electrical applications where the thermal class has to be matched to the operating temperature of the insulation system.

The adhesive systems named in the scope are acrylic crosslinked and silicone thermosetting adhesives. This matters because adhesive choice affects bonding behavior, temperature performance, and compatibility with the intended electrical assembly process.

Because the document is a material specification, its practical use is to support conformance checking. A manufacturer can declare the tape type, and a buyer or lab can compare the product against the standard’s stated material class.

The standard is specifically for pressure-sensitive adhesive tapes for electrical purposes. In practice, that narrows the intended use to electrical insulation and related applications, not general-purpose packaging or masking tapes.

The document is organized as a sheet for one material family within a wider part of the IEC 60454 series. For users, that means the standard should be read as a product-specific specification sheet rather than a standalone handbook.

Who uses SIST EN 60454-3-7:2002?

SIST EN 60454-3-7:2002 is used by tape manufacturers, electrical equipment makers, buyers of insulating materials, and quality teams that verify supplied material against a specification. Test laboratories may also use it when checking whether a tape matches the stated product family.

It is relevant in industries that use electrical insulation materials and adhesive tapes in assemblies where thickness, temperature class, and adhesive behavior matter. Typical tasks include product selection, supplier comparison, incoming inspection, and specification writing.

Which standards are used with SIST EN 60454-3-7:2002?

SIST EN 60454-3-7:2002 is identical to EN 60454-3-7:1998. The document is also tied to IEC 60454-3-7:1998, which is the international basis named in the front matter.

For readers, this means the Slovenian standard can be understood as the local adoption of the EN text, with the IEC document as its source family. That helps when comparing supplier declarations across national, European, and international references.

What does the SIST EN 60454-3-7:2002 document contain?

SIST EN 60454-3-7:2002 contains the specification sheet for polyimide film tapes with pressure-sensitive adhesive in the IEC 60454 series. Its main value is the defined product classification for four tape types and the associated material limits used to judge suitability.

The document gives the technical basis needed for selecting, ordering, and checking these tapes for electrical use. For practitioners, the important content is the set of requirements behind the product type, especially the thickness range, thermal index range, and adhesive system names.

As a Part 3 sheet, the document is meant to support technical comparison and conformity checking at product level. That makes it useful when a design, purchase order, or test plan needs a precise tape specification rather than a broad description.

SLOVENSKI STANDARD
01-oktober-2002
Pressure-sensitive adhesive tapes for electrical purposes - Part 3: Specifications
for individual materials - Sheet 7: Polyamide film tapes with pressure-sensitive
adhesive (IEC 60454-3-7:1998)
Pressure-sensitive adhesive tapes for electrical purposes -- Part 3: Specifications for
individual materials -- Sheet 7: Polyimide film tapes with pressure-sensitive adhesive
Selbstklebende Bänder für elektrotechnische Anwendungen -- Teil 3: Bestimmungen für
einzelne Materialien -- Blatt 7: Selbstklebende Bänder aus Polyimid-Folie
Rubans adhésifs sensibles à la pression à usages électriques -- Partie 3: Spécifications
pour matériaux particuliers -- Feuille 7: Rubans en polyimide avec un adhésif sensible à
la pression
Ta slovenski standard je istoveten z: EN 60454-3-7:1998
ICS:
29.035.20 3
...