SIST EN 60455-3-5:2006

Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 5: Unsaturated polyester based impregnating resins

This sheet 5 of IEC 60455-3 gives the requirements for unsaturated polyester based impregnating resins, and includes requirements for certain properties at elevated temperature. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not on this specification alone.

Reaktionsharzmassen für die Elektroisolierung -- Teil 3: Anforderungen an einzelne Werkstoffe -- Blatt 5: Imprägnierharzwerkstoffe auf Basis ungesättigter Polyester

Composés réactifs à base de résines utilisés comme isolants électriques -- Partie 3: Spécifications pour matériaux particuliers -- Feuille 5: Résines d'imprégnation à base de polyester insaturé

La présente feuille 5 de la CEI 60455-3 spécifie les exigences pour les résines d'imprégnation à base de polyester insaturé et contient les exigences relatives à certaines propriétés pour des températures élevées.

Reaktivne zmesi na osnovi smole, ki se uporabljajo za električno izolacijo – 3. del: Specifikacije za posamezne materiale – List 5: Impregnacijske smole na osnovi nenasičenega poliestra (IEC 60455-3-5:2006)

General Information

• Status: Published
• Publication Date: 30-Sep-2006
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IZO - Insulating materials
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2006
• Due Date: 01-Oct-2006
• Completion Date: 01-Oct-2006
• Ref Project: EN 60455-3-5:2006 - Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 5: Unsaturated polyester based impregnating resins

Relations

• Revised: SIST EN 60455-3-5:2002 - Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 5: Unsaturated polyester based impregnating resins
• Effective Date: 13-May-2010
• Replaces: SIST EN 60455-3-5:2002 - Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 5: Unsaturated polyester based impregnating resins
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 60455-3-5:2002 - Resin based reactive compounds used for electrical insulation -- Part 3: Specifications for individual materials -- Sheet 5: Unsaturated polyester based impregnating resins
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI SIST EN 60455-3-5:2006

STANDARD
oct 2006
Reaktivne zmesi na osnovi smole, ki se uporabljajo za električno izolacijo –
3. del: Specifikacije za posamezne materiale – List 5: Impregnacijske smole
na osnovi nenasičenega poliestra (IEC 60455-3-5:2006)
Resin based reactive compounds used for electrical insulation – Part 3:
Specifications for individual materials – Sheet 5: Unsaturated polyester based
impregnating resins (IEC 60455-3-5:2006)
ICS 29.035.20 Referenčna številka
SIST EN 60455-3-5:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60455-3-5

NORME EUROPÉENNE
April 2006
EUROPÄISCHE NORM

ICS 29.035.01 Supersedes EN 60455-3-5:2001


English version


Resin based reactive compounds used for electrical insulation
Part 3: Specifications for individual materials
Sheet 5: Unsaturated polyester based impregnating resins
(IEC 60455-3-5:2006)


Composés réactifs à base de résines Reaktionsharzmassen
utilisés comme isolants électriques für die Elektroisolierung
Partie 3: Spécifications Teil 3: Anforderungen
pour matériaux particuliers an einzelne Werkstoffe
Feuille 5: Résines d'imprégnation à base Blatt 5: Imprägnierharzwerkstoffe
de polyester insaturé auf Basis ungesättigter Polyester
(CEI 60455-3-5:2006) (IEC 60455-3-5:2006)




This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60455-3-5:2006 E

---------------------- Page: 2 ----------------------

- 2 -
Foreword
The text of document 15/237/FDIS, future edition 3 of IEC 60455-3-5, prepared by IEC TC 15, Standards
on specifications for electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and
was approved by CENELEC as EN 60455-3-5 on 2006-02-01.
This European Standard supersedes 60455-3-5:2001.
The major changes from EN 60455-3-5:2001 concern the introduction of unsaturated polyester with low
emission of volatile organic components. A definition, requirements and a test method for curing in thick
layer and emissions during curing were added.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60455-3-5:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 60455-3-5:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60172 1987 Test procedure for the determination of EN 60172 1994
the temperature index of enamelled
winding wires

IEC 60317-8 1990 Specifications for particular types of EN 60317-8 1994
winding wires
Part 8: Polyesterimide enamelled round
copper wire, class 180

IEC 60317-13 1990 Part 13: Polyester or polyesterimide EN 60317-13 1994
overcoated with polyamide-imide
enamelled round copper wire, class 200

IEC 60455-1 1998 Resin based reactive compounds used EN 60455-1 1998
for electrical insulation
Part 1: Definitions and general
requirements

IEC 60455-2 1998 Part 2: Methods of test EN 60455-2 1999

IEC 60464-2 2001 Varnishes used for electrical insulation EN 60464-2 2001
Part 2: Methods of test

IEC 61033 1991 Test methods for the determination of - -
bond strength of impregnating agents to
an enamelled wire substrate

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



60455-3-5
INTERNATIONAL


Troisième édition
STANDARD

Third edition

2006-03


Composés réactifs à base de résines
utilisés comme isolants électriques –
Partie 3:
Spécifications pour matériaux particuliers –
Feuille 5: Résines d'imprégnation à base de
polyester insaturé

Resin based reactive compounds used
for electrical insulation –
Part 3:
Specifications for individual materials –
Sheet 5: Unsaturated polyester based
impregnating resins

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
L
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

60455-3-5  IEC:2006 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9

1 Scope.11
2 Normative references .11
3 Terms and definitions .13
4 Designation .13
5 Requirements .13
5.1 Flash point .15
5.2 Density.15
5.3 Viscosity.15
5.4 Curing in thick layer and emissions during curing .15
5.5 Effect of the reactive compound on enamelled wires .17
5.6 Temperature index .17
5.7 Resistance to vapour of solvents .17
5.8 Effect of water immersion on volume resistivity .17

Annex A (normative) Curing in thick layer and determination of emissions .19

---------------------- Page: 6 ----------------------

60455-3-5  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________

RESIN BASED REACTIVE COMPOUNDS USED
FOR ELECTRICAL INSULATION –

Part 3: Specifications for individual materials –
Sheet 5: Unsaturated polyester based impregnating resins


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This International Standard
...