SIST ES 202 336-8 V1.1.1:2009

• Abstract:

  The present document applies to monitoring and control of remote power feeding systems for telecommunication equipment. The present document defines:; - The monitored and controlled remote power feeding system architectures.; - The minimum set of exchanged information required at the interface, described in "natural language" in text tables.; - The XML files with tags and variables corresponding to the data in the tables.; .

• Status: Published
• Publication Date: 08-Oct-2009
• ICS: 19.040 - Environmental testing
• ICS: 33.050.01 - Telecommunication terminal equipment in general
• Technical Committee: SPN - Services and Protocols for Networks
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2009
• Due Date: 06-Dec-2009
• Completion Date: 09-Oct-2009
• Ref Project: ETSI ES 202 336-8 V1.1.1 (2009-09) - Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 8: Remote Power Feeding System control and monitoring information model

Overview

SIST ES 202 336-8 V1.1.1:2009 addresses the environmental engineering requirements for monitoring and control interfaces used in telecommunication networks, specifically focusing on remote power feeding systems. Developed by the Slovenian Institute for Standardization (SIST) and aligned with ETSI standards, this document is essential for ensuring reliable, safe, and effective operation of power transmission to remote telecommunication equipment. The standard defines the necessary system architectures, interfaces, and information models (including XML structures) required for interoperability and integration in network infrastructure management.

Key Topics

• Remote Power Feeding System Architecture: Describes the key elements (up converter systems, down converter systems, remote sites, and control units) and their roles in delivering power from central to remote telecom locations.
• Monitoring and Control Interface: Specifies how environmental parameters, operational status, and alarms are monitored and controlled via standardized communication interfaces.
• Information Exchange Requirements: Outlines the minimum necessary data-such as operational states, alarms, and events-to be exchanged over the interface, ensuring consistent oversight and troubleshooting capabilities.
• XML Information Model: Details the structure and tags for XML-based data exchange, enabling integration with site management and automation systems.
• Mandatory and Optional Data Sets: Differentiates between required and supplemental information for effective remote power feeding system supervision.

Applications

Implementing SIST ES 202 336-8 V1.1.1:2009 provides practical benefits for various stakeholders in telecommunication infrastructure:

• Telecom Network Operators: Enables consistent, reliable monitoring and control of critical power infrastructure at remote sites, reducing downtime and maintenance costs.
• Equipment Manufacturers: Ensures that products meet harmonized interface requirements, facilitating multi-vendor interoperability and integration.
• System Integrators and Engineers: Provides a clear, standardized method for defining control interfaces and data exchange models, crucial for large-scale deployments and network expansions.
• Remote Site Management: Empowers automated systems to detect faults, trigger alarms, and log operational data for preventive maintenance and efficient network operation.
• Regulatory Compliance: Supports adherence to environmental engineering standards and safety guidelines for remote power feeding systems.

Common use cases include:

• Supervising up and down converter system status and alarms (e.g., converter failures, fan status)
• Monitoring voltage and temperature parameters at remote and central sites
• Collecting and recording operational data for system health assessment
• Triggering automated alerts in case of abnormal events (such as reduced power feed or breaker trips)

Related Standards

This standard forms part of a broader framework for monitoring and control interfaces in telecommunication network environments. Other relevant standards include:

• SIST ES 202 336-1: Generic interface for infrastructure equipment (telecom power, cooling, environmental systems)
• ETSI EN 300 132-2/3: Power supply interface at telecom equipment inputs (DC and AC)
• ETSI EN 302 099: Powering requirements for access network equipment
• IEC 60950-21: Safety requirements for remote power feeding
• IEC/TR 62102: Electrical safety and classification of interfaces in ICT networks

By aligning with SIST ES 202 336-8 V1.1.1:2009 and these related standards, organizations can ensure robust integration, improved system reliability, and streamlined operations across their telecommunication infrastructure.

---

Keywords: remote power feeding, telecommunication networks, monitoring and control interface, infrastructure equipment, environmental engineering, XML information model, system architecture, equipment monitoring, ETSI, SIST.

Final draft ETSI ES 202 336-8 V1.1.1 (2009-07)
ETSI Standard
Environmental Engineering (EE);
Monitoring and Control Interface for Infrastructure Equipment
(Power, Cooling and Building Environment Systems
used in Telecommunication Networks);
Part 8: Remote Power Feeding System control
and monitoring information model

2 Final draft ETSI ES 202 336-8 V1.1.1 (2009-07)

Reference
DES/EE-02037-8
Keywords
control, interface, management, power, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 Final draft ETSI ES 202 336-8 V1.1.1 (2009-07)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Remote Power Feeding System . 6
Annex A (normative): Mandatory XML structure and elements . 8
A.1 Structure of an XML document for a Remote Power Feeding system . 8
A.2 The specific XML elements of a Remote Power Feeding system . 9
Annex B (normative): Summary of mandatory monitoring/supervision information and
f unctions . 10
B.1 Remote power feeding system . 10
B.2 Up converter system . 11
B.3 Remote Site . 11
Annex C (informative): Summary of non-mandatory monitoring/supervision information
and functions . 12
C.1 Remote power feeding system . 12
C.2 Up converter system . 12
C.3 Remote Site . 12
C.4 Down converter system . 13
Annex D (informative): Bibliography . 14
History . 15

ETSI
4 Final draft ETSI ES 202 336-8 V1.1.1 (2009-07)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Environmental Engineering (EE), and is
now submitted for the ETSI standards Membership Approval Procedure.
The present document is part 8 of a multi-part deliverable covering Monitoring and Control Interface for Infrastructure
Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks), as identified
below:
Part 1: "Generic Interface";
Part 2: "DC power system control and monitoring information model";
Part 3: "AC UPS power system control and monitoring information model";
Part 4: "AC distribution power system control and monitoring information model";
Part 5: "AC diesel back-up generator system control and monitoring information model";
Part 6: "Air conditioning system control and monitoring information model";
Part 7: "Other utilities system control and monitoring information model";
Part 8: "Remote Power Feeding System control and monitoring information model".
ETSI
5 Final draft ETSI ES 202 336-8 V1.1.1 (2009-07)
1 Scope
The present document applies to monitoring and control of remote power feeding systems for telecommunication
equipment.
The present document defines:
• The monitored and controlled remote power feeding system architectures.
• The minimum set of exchanged information required at the interface, described in "natural language" in text
tables.
• The XML files with tags and variables corresponding to the data in the tables.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI ES 202 336-1: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 1: Generic Interface".
[2] ETSI EN 300 132-2: "Environmental Engineering (EE); Power supply interface at the input to
telecommunications equipment; Part 2: Operated by direct current (dc)".
[3] ETSI EN 300 132-3: "Environmental Engineering (EE); Power supply interface at the input to
telecommunications equipment; Part 3: Operated by rectified current source, alternating current
source or direct current source up to 400 V".
[4] ETSI EN 302 099: "Environmental Engineering (EE); Powering of equipment in access network".
[5] IEC/TR 62102: "Electrical safety - Classification of interfaces for equipment to be connected to
information and communications technology networks".
[6] IEC 60950-21: "Information technology equipment - Safety - Part 21: Remote power feeding".
ETSI
6 Final draft ETSI ES 202 336-8 V1.1.1 (2009-07)
[7] ETSI ES 202 336-6: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 6: Air conditioning system control and monitoring
information model".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] IEC 60950-1: "Information technology equipment - Safety - Part 1: General requirements".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
NOTE: Terms referring to energy interface, equipment and distribution are described in power distribution
standards EN 300 132-2 [2], EN 300 132-3 [3] for ac and dc interface and EN 302 099 [4] for access
network equipment powering.
Remote Feeding Telecommunication circuit [6]: secondary circuit within t
...

ETSI Standard
Environmental Engineering (EE);
Monitoring and Control Interface for Infrastructure Equipment
(Power, Cooling and Building Environment Systems
used in Telecommunication Networks);
Part 8: Remote Power Feeding System control
and monitoring information model

2 ETSI ES 202 336-8 V1.1.1 (2009-09)

Reference
DES/EE-02037-8
Keywords
control, interface, management, power, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI ES 202 336-8 V1.1.1 (2009-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Remote Power Feeding System . 6
Annex A (normative): Mandatory XML structure and elements . 8
A.1 Structure of an XML document for a Remote Power Feeding system . 8
A.2 The specific XML elements of a Remote Power Feeding system . 9
Annex B (normative): Summary of mandatory monitoring/supervision information and
f unctions . 10
B.1 Remote power feeding system . 10
B.2 Up converter system . 11
B.3 Remote Site . 11
Annex C (informative): Summary of non-mandatory monitoring/supervision information
and functions . 12
C.1 Remote power feeding system . 12
C.2 Up converter system . 12
C.3 Remote Site . 12
C.4 Down converter system . 13
Annex D (informative): Bibliography . 14
History . 15

ETSI
4 ETSI ES 202 336-8 V1.1.1 (2009-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Environmental Engineering (EE).
The present document is part 8 of a multi-part deliverable covering Monitoring and Control Interface for Infrastructure
Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks), as identified
below:
Part 1: "Generic Interface";
Part 2: "DC power system control and monitoring information model";
Part 3: "AC UPS power system control and monitoring information model";
Part 4: "AC distribution power system control and monitoring information model";
Part 5: "AC diesel back-up generator system control and monitoring information model";
Part 6: "Air conditioning system control and monitoring information model";
Part 7: "Other utilities system control and monitoring information model";
Part 8: "Remote Power Feeding System control and monitoring information model".
ETSI
5 ETSI ES 202 336-8 V1.1.1 (2009-09)
1 Scope
The present document applies to monitoring and control of remote power feeding systems for telecommunication
equipment.
The present document defines:
• The monitored and controlled remote power feeding system architectures.
• The minimum set of exchanged information required at the interface, described in "natural language" in text
tables.
• The XML files with tags and variables corresponding to the data in the tables.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI ES 202 336-1: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 1: Generic Interface".
[2] ETSI EN 300 132-2: "Environmental Engineering (EE); Power supply interface at the input to
telecommunications equipment; Part 2: Operated by direct current (dc)".
[3] ETSI EN 300 132-3: "Environmental Engineering (EE); Power supply interface at the input to
telecommunications equipment; Part 3: Operated by rectified current source, alternating current
source or direct current source up to 400 V".
[4] ETSI EN 302 099: "Environmental Engineering (EE); Powering of equipment in access network".
[5] IEC/TR 62102: "Electrical safety - Classification of interfaces for equipment to be connected to
information and communications technology networks".
[6] IEC 60950-21: "Information technology equipment - Safety - Part 21: Remote power feeding".
ETSI
6 ETSI ES 202 336-8 V1.1.1 (2009-09)
[7] ETSI ES 202 336-6: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 6: Air conditioning system control and monitoring
information model".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] IEC 60950-1: "Information technology equipment - Safety - Part 1: General requirements".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
NOTE: Terms referring to energy interface, equipment and distribution are described in power distribution
standards EN 300 132-2 [2], EN 300 132-3 [3] for ac and dc interface and EN 302 099 [4] for access
network equipment powering.
Remote Feeding Telecommunication circuit [6]: secondary circuit within the equipment, intended to supply or
...

SLOVENSKI STANDARD
01-november-2009
2NROMVNLLQåHQLULQJ((1DG]RURYDOQLLQNUPLOQLYPHVQLN]DLQIUDVWUXNWXUQR
RSUHPRHOHNWURHQHUJHWVNLKODGLOQLLQVWDYEQLRNROMVNLVLVWHPLY
WHOHNRPXQLNDFLMVNLKRPUHåMLKGHO,QIRUPDFLMVNLPRGHO]DNUPLOMHQMHLQ
QDG]RURYDQMHVLVWHPD]DGDOMLQVNRHOHNWULþQRQDSDMDQMH
Environmental Engineering (EE) - Monitoring and Control Interface for Infrastructure
Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks) - Part 8: Remote Power Feeding System control and
monitoring information model
Ta slovenski standard je istoveten z: ES 202 336-8 Version 1.1.1
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

ETSI Standard
Environmental Engineering (EE);
Monitoring and Control Interface for Infrastructure Equipment
(Power, Cooling and Building Environment Systems
used in Telecommunication Networks);
Part 8: Remote Power Feeding System control
and monitoring information model

2 ETSI ES 202 336-8 V1.1.1 (2009-09)

Reference
DES/EE-02037-8
Keywords
control, interface, management, power, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
3 ETSI ES 202 336-8 V1.1.1 (2009-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 6
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Remote Power Feeding System . 6
Annex A (normative): Mandatory XML structure and elements . 8
A.1 Structure of an XML document for a Remote Power Feeding system . 8
A.2 The specific XML elements of a Remote Power Feeding system . 9
Annex B (normative): Summary of mandatory monitoring/supervision information and
f unctions . 10
B.1 Remote power feeding system . 10
B.2 Up converter system . 11
B.3 Remote Site . 11
Annex C (informative): Summary of non-mandatory monitoring/supervision information
and functions . 12
C.1 Remote power feeding system . 12
C.2 Up converter system . 12
C.3 Remote Site . 12
C.4 Down converter system . 13
Annex D (informative): Bibliography . 14
History . 15

ETSI
4 ETSI ES 202 336-8 V1.1.1 (2009-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Environmental Engineering (EE).
The present document is part 8 of a multi-part deliverable covering Monitoring and Control Interface for Infrastructure
Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks), as identified
below:
Part 1: "Generic Interface";
Part 2: "DC power system control and monitoring information model";
Part 3: "AC UPS power system control and monitoring information model";
Part 4: "AC distribution power system control and monitoring information model";
Part 5: "AC diesel back-up generator system control and monitoring information model";
Part 6: "Air conditioning system control and monitoring information model";
Part 7: "Other utilities system control and monitoring information model";
Part 8: "Remote Power Feeding System control and monitoring information model".
ETSI
5 ETSI ES 202 336-8 V1.1.1 (2009-09)
1 Scope
The present document applies to monitoring and control of remote power feeding systems for telecommunication
equipment.
The present document defines:
• The monitored and controlled remote power feeding system architectures.
• The minimum set of exchanged information required at the interface, described in "natural language" in text
tables.
• The XML files with tags and variables corresponding to the data in the tables.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI ES 202 336-1: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 1: Generic Interface".
[2] ETSI EN 300 132-2: "Environmental Engineering (EE); Power supply interface at the input to
telecommunications equipment; Part 2: Operated by direct current (dc)".
[3] ETSI EN 300 132-3: "Environmental Engineering (EE); Power supply interface at the input to
telecommunications equipment; Part 3: Operated by rectified current source, alternating current
source or direct current source up to 400 V".
[4] ETSI EN 302 099: "Environmental Engineering (EE); Powering of equipment in access network".
[5] IEC/TR 62102: "Electrical safety - Classification of interfaces for equipment to be connected to
information and communications technology networks".
[6] IEC 60950-21: "Information technology equipment - Safety - Part 21: Remote power feeding".
ETSI
6 ETSI ES 202 336-8 V1.1.1 (2009-09)
[7] ETSI ES 202 336-6: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 6: Air conditioning system control and monitoring
information model".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] IEC 60950-1: "Information technology equipment - Safety -
...