SIST EN 61300-2-37:2007

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-37: Tests - Cable bending for fibre optic closures

This part of IEC 61300, when required by the relevant specification, evaluates the effectiveness of the sealing and clamping hardware of a fibre optic closure that functions to protect, secure and store passive fibre optic components (splices, connectors, branching devices) when the cable entering or exiting fibre optic closure is subjected to bending.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-37: Prüfungen - Kabelbiegung bei Muffen

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-37: Essais - Efforts de flexion sur le câble pour les boîtiers de fibres optiques

Cette partie de la CEI 61300, lorsque cela est exigé par la spécification applicable, évalue l'efficacité du dispositif d'étanchéité et de fixation d'un boîtier à fibres optiques assurant la protection, la sécurisation et la conservation des composants passifs à fibres optiques (épissures, connecteurs, dispositifs de couplage) lorsqu'un câble entrant ou sortant du boîtier de fibres optiques est soumis à un effort de flexion.

Optični spojni elementi in pasivne komponente – Osnovni preskuševalni in merilni postopki – 2-37. del: Preskušanje – Upogibanje kabla za ohišja optičnih kablov (IEC 61300-2-37:2006)

General Information

• Status: Withdrawn
• Publication Date: 16-Jul-2007
• Withdrawal Date: 12-Jun-2017
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Jun-2017
• Due Date: 06-Jul-2017
• Completion Date: 13-Jun-2017
• Ref Project: EN 61300-2-37:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures

Relations

• Replaced By: SIST EN 61300-2-37:2016 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures (IEC 61300-2-37:2016)
• Effective Date: 16-Aug-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-37:2007
01-september-2007
1DGRPHãþD
SIST EN 61300-2-37:1999
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH±2VQRYQLSUHVNXãDOQLLQPHULOQL
SRVWRSNL±GHO3UHVNXãDQMH±8SRJLEDQMHNDEOD]DRKLãMDRSWLþQLKNDEORY
,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-37: Tests - Cable bending for fibre optic closures (IEC
61300-2-37:2006)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-37: Prüfungen - Kabelbiegung bei Muffen (IEC 61300-2-37:2006)
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-37: Essais - Efforts de flexion sur le
câble pour les boîtiers de fibres optiques (IEC 61300-2-37:2006)
Ta slovenski standard je istoveten z: EN 61300-2-37:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-37:2007 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61300-2-37

NORME EUROPÉENNE
January 2007
EUROPÄISCHE NORM

ICS 33.180.20 Supersedes EN 61300-2-37:1997


English version


Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-37: Tests -
Cable bending for fibre optic closures
(IEC 61300-2-37:2006)


Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-37: Essais - Teil 2-37: Prüfungen -
Efforts de flexion sur le câble Kabelbiegung bei Muffen
pour les boîtiers de fibres optiques (IEC 61300-2-37:2006)
(CEI 61300-2-37:2006)




This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-37:2007 E

---------------------- Page: 2 ----------------------

EN 61300-2-37:2007 - 2 -
Foreword
The text of document 86B/2366/FDIS, future edition 2 of IEC 61300-2-37, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-37 on 2006-11-01.
This European Standard supersedes EN 61300-2-37:1997.
Specific technical changes from EN 61300-2-37:1997 include tests on functions of the closure to protect,
secure and store passive fibre optic components (splices, connectors, branching devices) when the cable
entering or exiting fibre optic closure is subjected to bending.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-37:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61300-2-23 NOTE  Harmonized as EN 61300-2-23:1997 (not modified).
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61300-2-37:2007
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 61300-1 - Fibre optic interconnecting devices and EN 61300-1 2003
passive components - Basic test and
measurement procedures -
Part 1: General and guidance


1) 2)
IEC 61300-2-38 - Fibre optic interconnecting devices and EN 61300-2-38 2006
passive components - Basic test and
measurement procedures -
Part 2-38: Tests - Sealing for pressurized
fibre optic closures


1) 2)
IEC 61300-3-1 - Fibre optic interconnecting devices and EN 61300-3-1 2005
passive components - Basic test and
measurement procedures -
Part 3-1: Examinations and measurements -
Visual examination


1) 2)
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 2003
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss


1) 2)
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 2002
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss




1)
Undated reference.
2)
Valid edition at date of issue.

---------------------- Page: 4 ----------------------

NORME CEI
INTERNATIONALE
IEC



61300-2-37
INTERNATIONAL


Deuxième édition
STANDARD

Second edition

2006-10


Dispositifs d’interconnexion et
composants passifs à fibres optiques –
Méthodes fondamentales d’essais et de mesures –
Partie 2-37:
Essais –
Efforts de flexion sur le câble pour
les boîtiers de fibres optiques

Fibre optic interconnecting
devices and passive components –
Basic test and measurement procedures –
Part 2-37:
Tests –
Cable bending for fibre optic closures
© IEC 2006 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

---------------------- Page: 5 ----------------------

61300-2-37 © IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references.9
3 Terms and definitions .9
4 General description.11
4.1 Specimen .11
4.2 Test procedure .11
5 Apparatus.11
6 Procedure.13
6.1 Preparation of the specimen .13
6.2 Pre-conditioning .13
6.3 Initial merasurents .13
6.4 Conditioning .13
6.5 Bending procedure .13
6.6 Recovery .15
6.7 Final measurements .15
7 Severity .15
8 Details to be specified in the test report .15

Bibliography .17

---------------------- Page: 6 ----------------------

61300-2-37 © IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________

FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-37: Tests – Cable bending for fibre optic closures


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the tw
...