SIST EN 60745-2-20:2004/A11:2007
Hand-held motor-operated electric tools - Safety -- Part 2-20: Particular requirements for band saws
Hand-held motor-operated electric tools - Safety -- Part 2-20: Particular requirements for band saws
Amandma A11:2007 je dodatek k standardu SIST EN 60745-2-20:2004
Deals with the safety of hand held motor operated electric tools, particular requirements for band saws. The rated voltage being not more than 250 V for single-phase a.c. or d.c., and 440 V for three phase a.c. tools.
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-20: Besondere Anforderungen für Bandsägen
Outils électroportatifs à moteur - Sécurité -- Partie 2-20: Règles particulières pour les scies à ruban
Ročna električna orodja - Varnost - 2-20. del: Posebne zahteve za tračne žage
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 60745-2-20:2004/A11:2007
01-oktober-2007
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO 3RVHEQH]DKWHYH]DWUDþQHåDJH
Hand-held motor-operated electric tools - Safety -- Part 2-20: Particular requirements for
band saws
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-20: Besondere
Anforderungen für Bandsägen
Outils électroportatifs à moteur - Sécurité -- Partie 2-20: Règles particulières pour les
scies à ruban
Ta slovenski standard je istoveten z: EN 60745-2-20:2003/A11:2007
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-20:2004/A11:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 60745-2-20:2004/A11:2007
---------------------- Page: 2 ----------------------
SIST EN 60745-2-20:2004/A11:2007
EUROPEAN STANDARD
EN 60745-2-20/A11
NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM
ICS 25.140.20
English version
Hand-held motor-operated electric tools -
Safety -
Part 2-20: Particular requirements for band saws
Outils électroportatifs à moteur - Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-20: Règles particulières Sicherheit -
pour les scies à ruban Teil 2-20: Besondere Anforderungen
für Bandsägen
This amendment A11 modifies the European Standard EN 60745-2-20:2003; it was approved by CENELEC on
2007-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-20:2003/A11:2007 E
---------------------- Page: 3 ----------------------
SIST EN 60745-2-20:2004/A11:2007
EN 60745-2-20:2003/A11:2007 - 2 -
Foreword
This amendment to the European Standard EN 60745-2-20:2003 was prepared by the Technical
Committee CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as amendment A11 to EN 60745-2-20:2003 on 2007-03-01.
This amendment was prepared to align the Subclause 6.2 with the new Subclause 6.2 in
EN 60745-1:2006. Moreover, vibration values determined with the new 6.2 are complying with the
requirements of the Physical Agents Directive Vibration 2002/44/EC.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-03-01
– latest date by which the national standards conflicting
with the amendment have to be withdrawn (dow) 2008-03-01
__________
---------------------- Page: 4 ----------------------
SIST EN 60745-2-20:2004/A11:2007
- 3 - EN 60745-2-20:2003/A11:2007
Foreword
th
Replace the 5 paragraph by the following:
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directive 98/37/EC (Machinery Directive), amended by Directive 98/79/EC. See Annex ZZ.
th h
Replace the 8 and 9t paragraphs by the following:
This standard follows the overall requirements of EN ISO 12100-1 and EN ISO 12100-2.
This Part 2-20 is to be used in conjunction with EN 60745-1:2006. When this standard states "addition",
"modification" or "replacement", the relevant text in Part 1 is to be adapted accordingly.
6 Environmental requirements
Replace the existing 6.2.2.4 by the following:
6.2.4.2 Location of the measurement
Addition:
Figure Z101 shows the positions for band saws.
6.2.6.3 Operating conditions
Modification:
Band saws are test
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.