SIST EN 60335-2-86:2003/A11:2016

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines

D134/C045: No NWI request needed for Amdts aligning existing standards prepared by CLC/TC 61 to the essential requirements of the Machinery Directive (2006/42/EC) * In hands of WG 6 * 2012-02-23 - UAP editing allocated to [e-mail]

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-86: Besondere Anforderungen für elektrische Fischereigeräte

Appareils électrodomestiques et analogues - Sécurité - Partie 2-86: Règles particulières pour les équipements électriques de pêche

Gospodinjski in podobni električni aparati - Varnost - 2-86. del: Posebne zahteve za električne ribiške stroje - Dopolnilo A11

General Information

• Status: Published
• Publication Date: 16-Feb-2016
• ICS: 65.150 - Fishing and fish breeding
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 27-Jan-2016
• Due Date: 02-Apr-2016
• Completion Date: 17-Feb-2016
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: EN 60335-2-86:2003/A11:2016 - Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines

Relations

• Amends: SIST EN 60335-2-86:2003 - Household and similar electrical appliances - Safety -- Part 2-86: Particular requirements for electric fishing machines
• Effective Date: 28-Jan-2023
• Revised: SIST EN 60335-2-86:2024 - Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines (IEC 60335-2-86:2018)
• Effective Date: 25-Apr-2017

Overview

EN 60335-2-86:2003/A11:2016 (CLC) specifies particular safety requirements for household and similar electrical appliances used as electric fishing machines. This 2016 amendment (A11) updates EN 60335-2-86:2003 to align certain requirements with the Machinery Directive (2006/42/EC) and the Low Voltage Directive (LVD 2006/95/EC). It covers both battery-operated and internal-combustion-engine‑powered electric fishing appliances and includes normative annexes for machines combining electric functionality with portable engines.

Key administrative dates:

• Approved by CENELEC: 2015-11-16 (dop)
• Conflicting national standards to be withdrawn by: 2018-11-16 (dow)

Key topics and technical requirements

• Scope and applicability: Particular safety requirements for electric fishing machines; Annex ZE addresses appliances with internal combustion engines intended for commercial use.
• Marking and instructions:
  • Battery-operated devices must include safe battery‑charging instructions.
  • Operators (except for stationary machines) must wear high‑visibility waistcoats showing IEC symbol 5036 and the text “caution electro fishing” (symbol height ≥ 250 mm; letter height ≥ 50 mm). For fish barriers and stationary installations additional signage and larger lettering (≥ 100 mm) are required.
  • Manuals must state intended use, auxiliary equipment, PPE, and accident procedures.
• Electrical and construction safety:
  • Protection against electrolyte leakage from batteries to prevent reduction of clearances and insulation failure.
  • Biased-off switches may be remote and foot- or hand‑operated; starting must only occur by intended control actuation.
  • Exhausts of combustion engines must direct gases away from the user.
• Noise and vibration:
  • Annex ZAA defines noise emission measurement procedures (EN ISO 3744 / EN ISO 11203) including microphone positions and a 1 m measurement distance, and guidance on measurement uncertainty.
  • Instructions must report A‑weighted sound pressure at workstations when > 70 dB(A).
  • Vibration information (EN ISO 22867) must be given when hand-arm r.m.s. acceleration exceeds 2.5 m/s².
• Annexes:
  • ZE (normative) - additional requirements for machines with portable internal combustion engines and relationship to Machinery Directive.
  • ZAA (normative) - acoustical noise emission measurement code.
  • ZF (informative) - allocation criteria under LVD or MD.

Applications and who uses this standard

• Manufacturers of electric fishing machines (battery and engine‑powered) for design, safety labeling, and CE marking.
• Test laboratories and conformity assessors performing noise, vibration and electrical safety verification.
• Certification bodies and notified bodies evaluating compliance with LVD and Machinery Directive requirements.
• Safety managers and procurement officers specifying equipment for commercial fisheries and fish‑barrier installations.

Related standards

• EN 60335-1 (general appliance safety)
• EN ISO 3744, EN ISO 4871, EN ISO 11203 (acoustics)
• EN ISO 22867 (vibration)
• Machinery Directive 2006/42/EC and LVD 2006/95/EC

Keywords: EN 60335-2-86, electric fishing machines standard, safety requirements, CLC, noise emission, vibration, battery safety, internal combustion engine, CE compliance.

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2016
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO3RVHEQH]DKWHYH
]DHOHNWULþQHULELãNHVWURMH'RSROQLOR$
Household and similar electrical appliances - Safety - Part 2-86: Particular requirements
for electric fishing machines
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-86:
Besondere Anforderungen für elektrische Fischereigeräte
Appareils électrodomestiques et analogues - Sécurité - Partie 2-86: Règles particulières
pour les équipements électriques de pêche
Ta slovenski standard je istoveten z: EN 60335-2-86:2003/A11:2016
ICS:
65.150 Ribolov in ribogojstvo Fishing and fish breeding
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60335-2-86:2003/A11

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2016
ICS 65.150
English Version
Household and similar electrical appliances - Safety - Part 2-86:
Particular requirements for electric fishing machines
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-86: Règles particulières pour les équipements ähnliche Zwecke - Teil 2-86: Besondere Anforderungen für
électriques de pêche elektrische Fischereigeräte
This amendment A11 modifies the European Standard EN 60335-2-86:2003; it was approved by CENELEC on 2015-11-16. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60335-2-86:2003/A11:2016 E

European foreword
This document (EN 60335-2-86:2003/A11:2016) has been prepared by CLC/TC 61 "Safety of
household and similar electrical appliances".
The following dates are fixed:
• latest date by which this document has
(dop) 2016-11-16
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national
(dow) 2018-11-16
standards conflicting with this
document have to be withdrawn
This amendment supplements or modifies the corresponding clauses of EN 60335-1:2012 and
EN 60335-2-86:2003 + A1:2005.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive 2006/42/EC, see informative Annex ZZ, which is an integral part
of this document.
Introduction
Replace the last paragraph:
The principle objectives of Low Voltage Directive 2006/95/EC are covered in this standard. The
Essential Health and Safety Requirements of the Machinery Directive 2006/42/EC, which can be
applicable to some appliances, covered by this part have also been taken into account.
1 Scope
Add the following after the fifth paragraph:
Additional requirements for electric fishing machines with an internal combustion engine are given in
Annex ZE.
2 Normative references
Replace the text by the following:
This clause of Part 1 is applicable except as follows.
Add the following standards:
EN ISO 3744, Acoustics — Determination of sound power levels and sound energy levels of noise
sources using sound pressure — Engineering methods for an essentially free field over a reflecting
plane (ISO 3744)
EN ISO 4871:2009, Acoustics — Declaration and verification of noise emission values of machinery
and equipment (ISO 4871:1996)
EN ISO 11203:2009, Acoustics — Noise emitted by machinery and equipment — Determination of
emission sound pressure levels at a work station and at other specified positions from the sound
power level (ISO 11203:1995)
EN ISO 22867, Forestry and gardening machinery — Vibration test code for portable hand-held
machines with internal combustion engine — Vibration at the handles (ISO 22867)
7 Marking and instructions
This clause of Part 1 is applicable except as follows.
7.12
Add the following after the warning:
The instructions for battery-operated electric fishing machines shall give instructions how to charge
safely the battery.
Electric fishing machines, except stationary electric fishing machines, shall state that the
operators have to wear waistcoats, printed with symbol 5036 of IEC 60417 and the following text
“caution electro fishing”. The symbol and the text on the waistcoat shall be clearly visible for fishermen
and observers. The height of this symbol shall be at least 250 mm and the height of the letters shall be
at least 50 mm.
The operator of the catching electrode (anode) shall wear a waistcoat in such a manner that the
warning is clearly visible. If the operator of the catching electrode is fishing out of sight of the return
electrode (cathode), the return electrode (cathode) has to be supervised by a further person wearing a
waistcoat. This further person shall be able to communicate with the operator of the catching
electrode.
NOTE Z101 The communication between the operator and the further person can be done by using mobile phones or similar
means.
Unless there are national and local regulation, the instructions of stationary electric fishing
machines and electric fish barriers shall state that the dangerous area shall be marked with signs
printed with symbol 5036 of IEC 60417 with a height of at least 250 mm and the following text “Caution
electric fishing machine/electric fish barrier – Keep away!”. For fish barriers, additional signs with the
following text shall be placed near the water: “Before work in contact with water is carried out, switch
off the electric fish barrier”. The height of the letters shall be at least 100 mm.
The colour of the background of the sign shall be yellow and the text shall be in black.
NOTE Z102 The dangerous area depends of the topology of the system, the conductivity of the water, the waveform and value
of the used voltage. Recommendations of the manufacturer are necessary to define the dangerous area.
22 Construction
22.112
Add the following in the first paragraph:
The biased-off switch may also be located separately from the electrodes; in this case, the biased-
off switch shall be operated by foot or hand.
Add the following new subclause:
22.Z101 Machines with batteries shall be designed in such a way that electrolyte leakage from the
battery shall not impair compliance with this standard; in particular, there shall be no possibility of the
electrolyte coming in contact with insulation, which could result in a reduction of clearances and
creepage distances below the values specified in Clause 29.
The battery housing shall be designed and constructed in such a way as to prevent the electrolyte
being ejected on to the user and to avoid the accumulation of harmful fumes in places occupied by the
user.
Compliance is checked by inspection and test.
Annexes
The annexes of Part 1 are applicable except as follows.
Annex ZE
(normative)
Specific additional requirement for electric fishing appliances
including an internal combustion engine
Annex ZE of Part 1 is applicable with the following modifications:
Introduction
Replacement:
For the verification of compliance of appliances or machines intended for commercial use and that
include a portable internal combustion engine with the Essential Health and Safety Requirements
(EHSR) of the Directive 2006/42/EC, the requirements in this Annex ZE shall additionally apply.
1 Scope
Replacement:
Annex ZE deals with additional requirements concerning electric fishing appliances intended for
commercial use and that include a portable internal combustion engine.
3 Terms and definitions
This clause of Annex ZE of Part 1 is applicable.
4 General requirement
This clause of Annex ZE of Part 1 is applicable with the following modification:
Addition of a new paragraph:
For the purpose of Annex ZE, the term ‘appliance’ as used in Part 1 is to be read as ‘machine’.
7 Marking and instructions
This clause of Annex ZE of Part 1 is applicable with the following modifications:
7.1
Add a new dashed item:
– gross weight of the machine as ready for use in kilograms;
7.12
Add the following:
The front cover of the instruction manual shall include the substance of the following warning:
CAUTION Read the instruction manual before using the appliance.
This wording may be replaced by symbols 0434 and 1641 of ISO 7000.
Add the following dashes to the dashed list:
• the intended use of the appliance and the auxiliary equipment as covered by the scope of this
standard;
• the essential characteristics of the auxiliary equipment which may be fitted to the appliance;
• the meaning of the symbols used on the appliance and in the instruction manual;
• information regarding personal protective equipment to be used when operating the appliance;
• the operating method to be followed in the event of accident.
If applicable, the instructions shall indicate the parts subject to wear and the criteria for replacement if
they affect the health and safety of the operator.
7.12.ZE1
In the sixth dashed item, replace the words “the relevant Part 2” by “Annex ZAA”.
In the sixth dashed item, replace the first sub-dashed item by:
– “the A-weighted emission sound pressure lev
...