oSIST prEN ISO 13628-17:2010

Petroleum and natural gas industries - Design and operation of subsea production systems - Part 17: Guidelines for flexible pipe ancillary equipment (ISO/DIS 13628-17:2010)

This recommended practice provides guidelines for the design, materials selection, analysis, testing, manufacture,
handling, transportation, installation and integrity management of flexible pipe ancillary equipment. This recommended practice supplements N384 which specifies minimum requirements for the design, material selection, manufacture, documentation, testing, marking, and packaging of flexible pipe ancillary.
This recommended practice is intended to be used in close conjunction with N384, EN ISO 13628-2 and prEN ISO 13628-11 in order to adopt a system approach in the design of theflexible pipe. Therefore reference to N384 and EN ISO 13628-2

Erdöl-, Petrochemische und Erdgasindustrie - Praxisempfehlungen für Zusatzausrüstungen von flexiblen Rohrleitungssystemen (ISO/DIS 13628-17:2010)

Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de production immergés - Partie 17: Lignes directrices pour accessoires de canalisations flexibles (ISO/DIS 13628-17:2010)

Industrija za predelavo nafte in zemeljskega plina - Načrtovanje in delovanje podvodnih proizvodnih sistemov - 17. del: Smernice za pomožno opremo iz gibkih cevnih sistemov (ISO/DIS 13628-17:2010)

General Information

• Status: Not Published
• Public Enquiry End Date: 04-Jul-2010
• ICS: 75.180.10 - Exploratory, drilling and extraction equipment
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 15-Jan-2020
• Due Date: 20-Jan-2020
• Completion Date: 15-Jan-2020
• Ref Project: prEN ISO 13628-17 - Petroleum and natural gas industries - Design and operation of subsea production systems - Part 17: Guidelines for flexible pipe ancillary equipment (ISO/DIS 13628-17:2010)

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2010
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD1DþUWRYDQMHLQGHORYDQMH
SRGYRGQLKSURL]YRGQLKVLVWHPRYGHO6PHUQLFH]DSRPRåQRRSUHPRL]JLENLK
FHYQLKVLVWHPRY,62',6
Petroleum and natural gas industries - Design and operation of subsea production
systems - Part 17: Guidelines for flexible pipe ancillary equipment (ISO/DIS 13628-
17:2010)
Erdöl-, Petrochemische und Erdgasindustrie - Praxisempfehlungen für
Zusatzausrüstungen von flexiblen Rohrleitungssystemen (ISO/DIS 13628-17:2010)
Industries du pétrole et du gaz naturel - Conception et exploitation des systèmes de
production immergés - Partie 17: Lignes directrices pour accessoires de canalisations
flexibles (ISO/DIS 13628-17:2010)
Ta slovenski standard je istoveten z: prEN ISO 13628-17
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
DRAFT
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2010
ICS 75.180.10
English Version
Petroleum and natural gas industries - Design and operation of
subsea production systems - Part 17: Guidelines for flexible pipe
ancillary equipment (ISO/DIS 13628-17:2010)
Industries du pétrole et du gaz naturel - Conception et Erdöl-, Petrochemische und Erdgasindustrie -
exploitation des systèmes de production immergés - Partie Praxisempfehlungen für Zusatzausrüstungen von flexiblen
17: Lignes directrices pour accessoires de canalisations Rohrleitungssystemen (ISO/DIS 13628-17:2010)
flexibles (ISO/DIS 13628-17:2010)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 12.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 13628-17:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (prEN ISO 13628-17:2010) has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" in collaboration
with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DIS 13628-17:2010 has been approved by CEN as a prEN ISO 13628-17:2010 without any
modification.
DRAFT INTERNATIONAL STANDARD ISO/DIS 13628-17
ISO/TC 67/SC 4 Secretariat: ANSI
Voting begins on: Voting terminates on:
2010-04-01 2010-09-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Petroleum and natural gas industries — Design and operation of
subsea production systems —
Part 17:
Guidelines for flexible pipe ancillary equipment
Industries du pétrole et du gaz naturel — Conception et exploitation des systèmes de production immergés —
Partie 17: Lignes directrices pour accessoires de canalisations flexibles
ICS 75.180.10
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
In accordance with the provisions of Council Resolution 15/1993 this document is circulated in
the English language only.
Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribué
en version anglaise seulement.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing and text composition will be undertaken at publication
stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©
International Organization for Standardization, 2010

ISO/DIS 13628-17
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user's country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,
recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO's
member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.
©
ii ISO 2010 – All rights reserved

ISO/DIS 13628-17
Contents Page
Foreword . vii
Introduction . viii
1 Scope . 1
2 Normative references . 2
3 Terms, definitions and abbreviated terms . 3
3.1 Terms and definitions . 3
3.2 Symbols and abbreviated terms . 14
4 General recommendations . 15
4.1 Introduction . 15
4.2 Ancillary equipment description . 17
4.3 Design considerations . 39
4.4 Materials . 43
4.5 Analysis considerations . 45
4.6 Prototype testing . 47
4.7 Manufacturing . 50
4.8 Handling, transportation, and installation . 51
4.9 Integrity management . 53
5 Bend stiffeners . 55
5.1 Applicability . 55
5.2 Design considerations . 55
5.3 Materials . 68
5.4 Analysis considerations . 69
5.5 Prototype testing . 72
5.6 Manufacturing . 74
5.7 Handling, transportation and installation . 76
5.8 Integrity management . 77
6 Bend restrictors . 78
6.1 Applicability . 78
6.2 Design considerations . 78
6.3 Materials . 85
6.4 Analysis considerations . 86
6.5 Prototype testing . 91
6.6 Manufacturing . 93
6.7 Handling and installation . 94
6.8 Integrity management . 96
7 Bellmouths . 102
7.1 General . 102
7.2 Des
...