Tannery machines - Moving platen machinery - Safety requirements

This European Standard specifies safety requirements for all the phases of the life of a machine listed in 3.11.a of EN 292-1:1991.  Moving platen machines are machines used for the processing of animal hides and skins. They are table type processing machines which are equipped with:  - vertical opening and closing movement, - alternative horizontal feed-in and feed-out movement.  This European standard covers the following machines (see figures 1 to 5 for typical configurations and normative annex C for descriptions):  a) vacuum dryers with vertical movement (...);  b) vacuum dryers with horizontal and vertical movement (...);  c) vacuum stretching machines (...);  d) platen ironing and embossing machines with vertical movement (...);  e) platen ironing and embossing machines with horizontal and vertical movement (...).  It takes account of intended use, foreseeable misuse, component and systems failure.  This European Standard applies to the machines manufactured after its date of issue.  All the significant hazards listed in clause 4 are covered by the requirements included in clause 5 except:  - dust, fume, vapour and liquid emissions  for which general guidelines are proposed in the informative annex B.  Designers and manufacturers shall verify directly that the methods adopted to reduce these hazards have been successful.

Gerberei-Maschinen - Maschinen mit beweglichen Platten - Sicherheitsanforderungen

Diese Europäische Norm beschreibt Sicherheitsanforderungen für die gesamte Lebensdauer einer Maschine gemäß 3.11a von EN 292-1:1991. Maschinen mit bewegten Platten sind Maschinen, die zur Bearbeitung von Tierhäuten und Fellen benutzt werden. Es sind Tischbearbeitungsmaschinen, welche ausgerüstet sind mit: vertikalen Öffnungs- und Schließbewegungen, wechselweise horizontalen Zuführ- und Abführbewegungen.

Machines de tannerie - Machines a plateaux mobiles - Prescriptions de sécurité

La présente norme européenne spécifie les prescriptions de sécurité pour toutes les phases de la vie d'une machine énumérées en 3.11.a de l'EN 292-1:1991.  Les machines a plateaux mobiles sont des machines utilisées pour le traitement des peaux et des cuirs d'animaux. Ce sont des machines a plateaux caractérisées par :  - un mouvement vertical d'ouverture et de fermeture ;  - un mouvement horizontal alternatif d'alimentation et de réception.

Tannery machines - Moving platen machinery - Safety requirements

General Information

Status
Published
Publication Date
31-Mar-2000
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2000
Due Date
01-Apr-2000
Completion Date
01-Apr-2000

RELATIONS

Buy Standard

Standard
SIST EN 1035:2000
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 1035:2000
01-april-2000
Tannery machines - Moving platen machinery - Safety requirements
Tannery machines - Moving platen machinery - Safety requirements

Gerberei-Maschinen - Maschinen mit beweglichen Platten - Sicherheitsanforderungen

Machines de tannerie - Machines a plateaux mobiles - Prescriptions de sécurité
Ta slovenski standard je istoveten z: EN 1035:1998
ICS:
59.140.40 Stroji in oprema za Machines and equipment for
proizvodnjo usnja in krzna leather and fur production
SIST EN 1035:2000 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1035:2000
---------------------- Page: 2 ----------------------
SIST EN 1035:2000
---------------------- Page: 3 ----------------------
SIST EN 1035:2000
---------------------- Page: 4 ----------------------
SIST EN 1035:2000
---------------------- Page: 5 ----------------------
SIST EN 1035:2000
---------------------- Page: 6 ----------------------
SIST EN 1035:2000
---------------------- Page: 7 ----------------------
SIST EN 1035:2000
---------------------- Page: 8 ----------------------
SIST EN 1035:2000
---------------------- Page: 9 ----------------------
SIST EN 1035:2000
---------------------- Page: 10 ----------------------
SIST EN 1035:2000
---------------------- Page: 11 ----------------------
SIST EN 1035:2000
---------------------- Page: 12 ----------------------
SIST EN 1035:2000
---------------------- Page: 13 ----------------------
SIST EN 1035:2000
---------------------- Page: 14 ----------------------
SIST EN 1035:2000
---------------------- Page
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.