kSIST FprEN 4641-301:2024
(Main)Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure 50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
This document specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 50/125 µm Graded Index fibre core, 1,8 mm outside diameter for non-pull-proof contact designs.
Luft- und Raumfahrt - Lichtwellenleiterkabel, Mantelaußendurchmesser 125 µm - Teil 301: Fester Aufbau, 50/125 µm GI-Faser, Kabelaußendurchmesser 1,8 mm - Produktnorm
No Scope available
Série Aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 μm - Partie 301 : Câble à structure serrée, fibre à gradient d’indice 50/125 μm, diamètre extérieur 1,8 mm - Norme de produit
Le présent document spécifie les caractéristiques générales ainsi que les conditions de qualification, de réception et d'assurance qualité pour un câble à fibre optique avec une âme de fibre à gradient d'indice 50/125 µm, un diamètre extérieur de 1,8 mm, pour les conceptions de contact résistant à la traction.
Aeronavtika - Kabli, optični, zunanji premer obloge vlakna 125 µm - 301. del: Kompaktna struktura 50/125 µm GI, imenski zunanji premer kabla 1,8 mm - Standard za izdelek
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4641-301:2022
01-september-2022
Aeronavtika - Kabli, optični, zunanji premer obloge vlakna 125 µm - 301. del:
Kompaktna struktura 50/125 µm GI, imenski zunanji premer kabla 1,8 mm -
Standard za izdelek
Aerospace series - Cables, optical 125 μm diameter cladding - Part 301: Tight structure
50/125 μm GI, fibre nominal 1,8 mm, outside diameter - Product standard
Luft- und Raumfahrt - Lichtwellenleiterkabel, Mantelaußendurchmesser 125 µm - Teil
301: Fester Aufbau, 50/125 µm GI-Faser, Kabelaußendurchmesser 1,8 mm -
Produktnorm
Série Aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 μm -
Partie 301 : Câble à structure serrée, fibre à gradient d’indice 50/125 μm, diamètre
extérieur 1,8 mm - Norme de produit
Ta slovenski standard je istoveten z: prEN 4641-301
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4641-301:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4641-301:2022
---------------------- Page: 2 ----------------------
oSIST prEN 4641-301:2022
DRAFT
EUROPEAN STANDARD
prEN 4641-301
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2022
ICS 49.090
English Version
Aerospace series - Cables, optical 125 µm diameter
cladding - Part 301: Tight structure 50/125 µm GI, fibre
nominal 1,8 mm, outside diameter - Product standard
Série Aérospatiale - Câbles, optiques, diamètre Luft- und Raumfahrt - Lichtwellenleiterkabel,
extérieur de la gaine optique 125 µm - Partie 301 : Mantelaußendurchmesser 125 µm - Teil 301: Fester
Câble à structure serrée, fibre à gradient d'indice Aufbau, 50/125 µm GI-Faser, Kabelaußendurchmesser
50/125 µm, diamètre extérieur 1,8 mm - Norme de 1,8 mm - Produktnorm
produit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4641-301:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4641-301:2022
prEN 4641-301:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
5 Cable construction . 5
6 Materials .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.