SIST EN 300 718-1 V1.2.1:2003

ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 1: Technical characteristics and test methods

To draft an EN to be harmonised under the R&TTE directive based on an existing ETS with a technical update too. Part 1: Radiocommunications aspects, technical characteristics and methods of measurement. Part 2: Essential requirements according to the R&TTE directive. Part 3: Non-Radiocommunications requirements.

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Lavinske žolne – Oddajno-sprejemni sistemi – 1. del: Tehnične karakteristike in preskusne metode

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 13.200 - Accident and disaster control
• ICS: 33.060.20 - Receiving and transmitting equipment
• ICS: 33.100.01 - Electromagnetic compatibility in general
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 300 718-1 V1.2.1 (2001-05) - ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 1: Technical characteristics and test methods

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 300 718-1 V1.2.1:2003
01-december-2003
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50±
/DYLQVNHåROQH±2GGDMQRVSUHMHPQLVLVWHPL±GHO7HKQLþQHNDUDNWHULVWLNHLQ
SUHVNXVQHPHWRGH
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); Avalanche Beacons;
Transmitter-receiver systems; Part 1: Technical characteristics and test methods
Ta slovenski standard je istoveten z: EN 300 718-1 Version 1.2.1
ICS:
13.200 3UHSUHþHYDQMHQHVUHþLQ Accident and disaster control
NDWDVWURI
33.060.20 Sprejemna in oddajna Receiving and transmitting
oprema equipment
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 300 718-1 V1.2.1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 300 718-1 V1.2.1:2003

---------------------- Page: 2 ----------------------

SIST EN 300 718-1 V1.2.1:2003
ETSI EN 300 718-1 V1.2.1 (2001-05)
European Standard (Telecommunications series)
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
Avalanche Beacons;
Transmitter-receiver systems;
Part 1: Technical characteristics and test methods

---------------------- Page: 3 ----------------------

SIST EN 300 718-1 V1.2.1:2003
2 ETSI EN 300 718-1 V1.2.1 (2001-05)
Reference
REN/ERM-RP08-0409-1
Keywords
Radio, safety, SAR, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: [phone] Fax: [phone]
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at http://www.etsi.org/tb/status/
If you find errors in the present document, send your comment to:
[e-mail]
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2001.
All rights reserved.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 300 718-1 V1.2.1:2003
3 ETSI EN 300 718-1 V1.2.1 (2001-05)
Contents
Intellectual Property Rights .6
Foreword.6
1 Scope.7
2 References.7
3 Definitions, symbols and abbreviations .7
3.1 Definitions . 7
3.2 Abbreviations. 8
3.3 Symbols . 8
4 General.8
4.1 Presentation of equipment for testing. 8
4.2 Mechanical and electrical design. 8
4.2.1 General. 8
4.2.2 Controls and indicators. 9
4.2.3 Maintaining the transmit mode. 9
4.2.4 Battery type . 9
4.2.5 Operating time. 9
4.2.6 Battery check. 9
4.2.7 Carrying system. 9
4.2.8 Operating Frequency. 9
4.2.9 Operating instructions . 9
4.2.10 Short form operating instructions. 10
4.2.11 Operating and storage temperatures. 10
4.3 Interpretation of the measurement results. 10
5 Test conditions, power sources and ambient temperatures .10
5.1 Normal and extreme test conditions . 10
5.2 External test power source. 10
5.3 Normal test conditions. 11
5.3.1 Normal temperature and humidity . 11
5.3.2 Normal test voltage. 11
5.4 Extreme test conditions. 11
5.4.1 Extreme temperatures. 11
5.5 Extreme test voltages. 11
5.5.1 Procedure for tests at extreme temperatures . 11
6 General conditions.12
6.1 Normal test signals. 12
6.2 Test fixture. 12
6.3 Test sites and general arrangements for radiated measurements . 12
6.4 Measuring receiver. 12
7 Environmental tests .13
7.1 Procedure. 13
7.2 Drop test on hard surface. 13
7.2.1 Definition . 13
7.2.2 Method of measurement. 13
7.2.3 Requirements. 13
7.3 Temperature tests . 13
7.3.1 General. 13
7.3.2 Dry heat cycle. 13
7.3.3 Low temperature cycle. 14
7.3.4 Requirements. 14
7.4 Immersion test. 14
7.4.1 Method of measurement. 14
7.4.2 Requirements. 14
ETSI

---------------------- Page: 5 ----------------------

SIST EN 300 718-1 V1.2.1:2003
4 ETSI EN 300 718-1 V1.2.1 (2001-05)
7.5 Solar radiation. 14
7.5.1 Method of measurement. 14
7.5.2 Requirements. 14
7.6 Tensile test. 15
7.6.1 Method of measurement. 15
7.6.2 Requirements. 15
8 Transmitter parameters .15
8.1 Modulation and carrier keying. 15
8.1.1 Definition . 15
8.1.2 Method of measurement. 15
8.1.3 Limits. 15
8.2 Frequency error. 16
8.2.1 Definition . 16
8.2.2 Method of measurement. 16
8.2.3 Limits. 16
8.3 Output field strength (H-field) . 16
8.3.1 Definition . 16
8.3.2 Method of measurement. 16
8.3.3 Limits. 16
8.3.3.1 Minimum transmitted field. 16
8.3.3.2 Maximum transmitted field. 17
8.4 Transmitter spurious emissions. 17
8.4.1 Definition . 17
8.4.2 Radiated H-field. 17
8.4.2.1 Method of measurement (< 30 MHz) .17
8.4.2.2 Limits. 17
8.4.3 Effective radiated power . 17
8.4.3.1 Method of measurement (≥ 30 MHz). 17
8.4.3.2 Limits. 18
9 Receiver parameters.18
9.1 Receiver sensitivity . 18
9.1.1 Definition . 18
9.1.2 Method of measurement. 19
9.1.3 Limits. 19
9.2 Changes in the received signal. 19
9.2.1 Definition . 19
9.2.2 Requirement . 19
9.3 Receiver spurious emissions . 19
9.3.1 Definition . 19
9.3.2 Radiated H-field. 19
9.3.2.1 Method of measurement (< 30 MHz) .19
9.3.2.2 Limits. 20
9.3.3 Effective radiated power . 20
9.3.3.1 Method of measurement (≥ 30 MHz). 20
9.3.3.2 Limits. 21
10 Measurement uncertainty.21
Annex A (normative): Radiated measurements.22
A.1 Test sites and general arrangements for measurements involving the use of radiated fields .22
A.1.1 Outdoor test site . 22
A.1.1.1 Standard position . 22
A.1.2 Test antenna. 23
A.1.2.1 Below 30 MHz. 23
A.1.2.2 Above 30 MHz . 23
A.1.3 Substitution antenna . 23
A.1.4 Optional additional indoor site. 24
A.2 Guidance on the use of radiation test sites .25
A.2.1 Measuring distance. 25
A.2.2 Test antenna. 25
ETSI

---------------------- Page: 6 ----------------------

SIST EN 300 718-1 V1.2.1:2003
5 ETSI EN 300 718-1 V1.2.1 (2001-05)
A.2.3 Substitution antenna . 25
A.2.4 Artificial antenna. 25
A.2.5 Auxiliary cables . 25
A.3 Further optional alternative indoor test site using an anechoic chamber .26
A.3.1 Example of the construction of a shielded anechoic chamber. 26
A.3.2 Influence of parasitic reflections in anechoic chambers . 26
A.3.3 Calibration of the shielded RF anechoic chamber. 27
Annex B (normative): Spurious limits, radiated H-field at 10 m distances .29
Annex C (normative): Simulated solar radiation source.30
Annex D (informative): E-fields in the near field at low frequencies .31
Annex E (normative): H-field limit correction factor for generated E-fields .33
History .34
ETSI

---------------------- Page: 7 ----------------------

SIST EN 300 718-1 V1.2.1:2003
6 ETSI EN 300 718-1 V1.2.1 (2001-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://www.etsi.org/ipr).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
For non-EU countries the present document may be used for regulatory (Type Approval) purposes.
The present document is part 1 of a multi-part deliverable covering the Avalanche Beacons; Transmitter-receiver
systems, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive";
Part 3: "Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive".
National transposition dates
Date of adoption of this EN: 18 May 2001
Date of latest announcement of this EN (doa): 31 August 2001
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 28 February 2002
Date of withdrawal of any conflicting National Standard (dow): 28 February 2002
ETSI

---------------------- Page: 8 ----------------------

SIST EN 300 718-1 V1.2.1:2003
7 ETSI EN 300 718-1 V1.2.1 (2001-05)
1 Scope
The present document covers requirements for avalanche beacons. Avalanche beacons are portable radio systems used
for locating avalanche victims, for the purpose of direct rescue, i.e. for rescue by comrades not buried by the avalanche.
These systems comprise a transmitter as well as a receiver part operating at 457 kHz.
2 References
The following documents contain provisions which, through reference in this text, constitute provisions of the present
document.
• References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• For a non-specific reference, the latest version applies.
[1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their
conformity (R&TTE Directive).
[2] ETSI ETR 028: "Radio Equipment and Systems (RES); Uncertainties in the measurement of
mobile radio equipment characteristics".
[3] CISPR 16-1: "Specification for radio disturbance and immunity measuring apparatus and methods;
Part 1: Radio disturbance and immunity measuring apparatus".
[4] ITU Radio Regulations (1998), Appendix S1 "Classification of emissions and necessary
bandwidths".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in the R&TTE Directive [1], and the
following apply.
environmental profile: range of environmental conditions under which equipment within the scope of the present
document is required to comply with the provisions of the present document
artificial antenna: tuned reduced-radiating dummy load equal to the nominal impedance specified by the applicant
conducted measurements: measurements which are made using a direct connection to the equipment under test
E-field: electric component of the field measured as voltage per unit length
H-field: magnetic component of the field measured as current per unit length
H-field test antenna: electrically screened loop or equivalent antenna, with which the magnetic component of the field
can be measured
integral antenna: antenna designed as an indispensable part of the equipment, with or without the use of an antenna
connector
ETSI

---------------------- Page: 9 ----------------------

SIST EN 300 718-1 V1.2.1:2003
8 ETSI EN 300 718-1 V1.2.1 (2001-05)
radiated measurements: measurements which involve the absolute measurement of a radiated field
(S + N)/N: ratio, expressed in Decibels, between the sum of the wanted signal plus the noise floor and the noise floor
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
R&TTE Radio and Telecommunications Terminal Equipment
RF Radio Frequency
3.3 Symbols
For the purposes of the present document, the following symbols apply:
A1A Class of emission (ITU Radio Regulations [4])
E Electrical field strength
Eo Reference electrical field strength, (see annex A)
f Frequency
H Magnetic field strength
Ho Reference magnetic field strength, (see annex A)
NNewton
PPower
R Distance
Ro Reference distance, (see annex A)
tTime
Z Wave impedance
l Wavelength (see annex A)
4 General
4.1 Presentation of equipment for testing
The applicant shall supply all relevant ancillary equipment needed for testing.
The applicant should also supply an operating manual for the device(s).
4.2 Mechanical and electrical design
4.2.1 General
The equipment shall be designed, constructed and manufactured in accordance with good engineering practice, and with
the aim of minimizing harmful interference to other equipment and services.
Transmitter and receiver shall be combined in one unit and be capable of being attached to the user's body.
The equipment shall be portable and capable of being used for rescue operations, caused by avalanche, between persons
that are in snowy, arctic areas or in similar areas.
The equipment shall in one unit comprise at least:
• an transmitter/receiver including antenna and battery;
• a control unit including an on/off switch; and
• a means for conveying information about the received signals to the user.
ETSI

---------------------- Page: 10 ----------------------

SIST EN 300 718-1 V1.2.1:2003
9 ETSI EN 300 718-1 V1.2.1 (2001-05)
4.2.2 Controls and indicators
The equipment shall have the following controls:
• on/off switch for the equipment with a visual indication that the equipment is switched on;
• a mean for conveying information about the received signals to the user; and
• a battery check feature.
4.2.3 Maintaining the transmit mode
A safety feature against involuntary or accidental leaving of the transmit mode shall be provided in the equipment.
4.2.4 Battery type
The equipment shall use a widely obtained battery type.
4.2.5 Operating time
With a set of batteries as recommended by the applicant, the equipment shall be capable of at least 200 hours of
transmitting at a temperature of +10°C and subsequent receiving for 1 hour at a temperature of -10°C, in compliance
with the requirements as stated in clauses 8.3 and 9.1.
4.2.6 Battery check
The equipment shall include a battery check feature. A positive check shall indicate the capability of at least 20 hours of
transmitting at a temperature of +10°C and subsequent receiving for 1 hour at a temperature of -10°C, in compliance
with the requirements as stated in clauses 8.3 and 9.1.
4.2.7 Carrying system
The equipment shall include a carrying system that gives the possibility for easy operation and safe placing. The
carrying system can be a part of the equipment or an accessory device. The carrying system shall have a joint tensile
strength of at least 50 N.
4.2.8 Operating Frequency
The equipment shall operate at the nominal frequency of 457 kHz in the transmit as well as in the receive mode.
4.2.9 Operating instructions
Operating instructions shall be delivered with every equipment. They shall cover the following subjects:
a) a statement on avalanche danger;
b) instruction for checking the battery, transmitter and receiver performance and range;
c) instructi
...