SIST EN ISO 8230-2:2009
Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)
Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)
This part of ISO 8230 specifies safety requirements for dry-cleaning machines that exclusively use perchloroethylene (herein after known as "perc") as their cleaning medium. It is applicable to such dry-cleaning machines, within the scope of ISO 8230-1, when they are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer. It is not applicable to: - open-circuit dry-cleaning machines; - transfer machines. This part of ISO 8230, in conjunction with ISO 8230-1, deals with all significant hazards, significant hazardous situations and significant hazardous events that have been identified as being significant to the types of machines covered by this part of ISO 8230 and which require specific action by the designer or manufacturer to eliminate or reduce the risk. It deals with the following significant hazards specific to the use of perc, which can lead to the inhalation of unhealthy vapours, to perc contact with the skin (including of the feet) or eyes of the machine operator and those of other personnel and members of the public, as well as to water and ground contamination: a) perc emission to the workroom, seepage into the ground and sewer during operation and maintenance of the water separator; b) percemission resulting from operation, cleaning and maintenance of the distilling installation. This part of ISO 8230 applies to machines manufactured after the date of its issue.
Sicherheitsanforderungen an Textilreinigungsanlagen - Teil 2: Maschinen, bei denen Perchlorethylen verwendet wird (ISO 8230-2:2008)
Sämtliche im Abschnitt 1 von Teil 1 dieser Internationalen Norm beschriebenen Anwendungsbereiche und Ausnahmen gelten für Textilreinigungsmaschinen, in denen Per verwendet wird.
Dieser Teil der Internationalen Norm gilt nicht für:
- Textilreinigungsmaschinen mit offenem Kreislauf und
- Umlademaschinen.
Exigences de sécurité pour les machines de nettoyage a sec - Partie 2: Machines utilisant du perchloroéthylene (ISO 8230-2:2008)
L'ISO 8230-2:2008 spécifie les exigences de sécurité pour les machines de nettoyage à sec utilisant exclusivement du perchloroéthylène comme moyen de nettoyage.
Elle s'applique aux machines de nettoyage au sec couvertes par le domaine d'application de l'ISO 8230‑1, lorsqu'elles sont utilisées normalement et dans les conditions de mauvaise utilisation raisonnablement prévisibles par le constructeur.
L'ISO 8230-2:2008 traite, conjointement avec l'ISO 8230‑1, de tous les phénomènes dangereux significatifs et des situations ou événements dangereux significatifs qui ont été identifiés comme étant pertinents aux machines couvertes par l'ISO 8230-2:2008, et qui exigent une action spécifique de la part du concepteur ou du fabricant pour éliminer ou réduire le risque.
Elle couvre tous les phénomènes dangereux significatifs spécifiques aux machines de nettoyage à sec utilisant du perchloroéthylène qui peuvent conduire à l'inhalation de vapeurs nocives par l'opérateur de la machine (ou par tout autre personnel ou personnes se trouvant sur les lieux), à un contact du perc avec la peau (incluant les pieds) ou avec les yeux de l'opérateur de la machine (ou ceux de tout autre personnel ou personnes se trouvant sur les lieux), ainsi qu'à la contamination de l'eau et du sol: émission de perc dans l'atelier, infiltration dans le sol et les égouts pendant le fonctionnement et l'entretien du séparateur d'eau; émission de perc résultant du fonctionnement, du nettoyage et de l'entretien de l'installation de distillation.
Varnostne zahteve za stroje za kemično čiščenje - 2. del: Stroji, ki uporabljajo perkloretilen (ISO 8230-2:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 8230-2:2009
01-april-2009
1DGRPHãþD
SIST EN ISO 8230:2000
9DUQRVWQH]DKWHYH]DVWURMH]DNHPLþQRþLãþHQMHGHO 6WURMLNLXSRUDEOMDMR
SHUNORUHWLOHQ ,62
Safety requirements for dry-cleaning machines - Part 2: Machines using
perchloroethylene (ISO 8230-2:2008)
Sicherheitsanforderungen an Textilreinigungsanlagen - Teil 2: Maschinen, bei denen
Perchlorethylen verwendet wird (ISO 8230-2:2008)
Exigences de sécurité pour les machines de nettoyage a sec - Partie 2: Machines
utilisant du perchloroéthylene (ISO 8230-2:2008)
Ta slovenski standard je istoveten z: EN ISO 8230-2:2008
ICS:
97.060 Aparati za nego perila Laundry appliances
SIST EN ISO 8230-2:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 8230-2:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 8230-2:2009
EUROPEAN STANDARD
EN ISO 8230-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2008
ICS 97.060 Supersedes EN ISO 8230:1997
English Version
Safety requirements for dry-cleaning machines - Part 2:
Machines using perchloroethylene (ISO 8230-2:2008)
Exigences de sécurité pour les machines de nettoyage à Sicherheitsanforderungen an Textilreinigungsanlagen - Teil
sec - Partie 2: Machines utilisant du perchloroéthylène (ISO 2: Maschinen, bei denen Perchlorethylen verwendet wird
8230-2:2008) (ISO 8230-2:2008)
This European Standard was approved by CEN on 13 September 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8230-2:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 8230-2:2009
EN ISO 8230-2:2008 (E)
Contents Page
Foreword.3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 8230-2:2009
EN ISO 8230-2:2008 (E)
Foreword
This document (EN ISO 8230-2:2008) has been prepared by Technical Committee ISO/TC 72 "Textile
machinery and machinery for dry-cleaning and industrial laundering" in collaboration with Technical
Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the
latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8230:1997.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directives.
For relationship with EC Directives, see informative Annex ZA, B, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8230-2:2008 has been approved by CEN as a EN ISO 8230-2:2008 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 8230-2:2009
EN ISO 8230-2:2008 (E)
Annex ZA
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 98/37/EC, Machinery, amended by 98/79/EC.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
4
---------------------- Page: 6 ----------------------
SIST EN ISO 8230-2:2009
EN ISO 8230-2:2008 (E)
Annex ZB
(informative)
Relationship between this International Standard and the Essential
Requirements of EU Directive 2006/42/EC
This International Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC, Machinery.
Once this standard is cited in the Official Journal of the European Communities under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
5
---------------------- Page: 7 ----------------------
SIST EN ISO 8230-2:2009
---------------------- Page: 8 ----------------------
SIST EN ISO 8230-2:2009
INTERNATIONAL ISO
STANDARD 8230-2
First edition
2008-10-01
Safety requirements for dry-cleaning
machines —
Part 2:
Machines using perchloroethylene
Exigences de sécurité pour les machines de nettoyage à sec —
Partie 2: Machines utilisant du perchloroéthylène
Reference number
ISO 8230-2:2008(E)
©
ISO 2008
---------------------- Page: 9 ----------------------
SIST EN ISO 8230-2:2009
ISO 8230-2:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 8230-2:2009
ISO 8230-2:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8230-2 was prepared by Technical Committee ISO/TC 72, Textile machinery and accessories,
Subcommitt
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.