SIST EN ISO 22631:2019

Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)

This document specifies a test method to measure the adhesion of a resilient or textile floor covering or wall covering bonded to a given substrate under peel forces. The term "wall covering" does not include any type of wallpaper.

Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Schälversuch (ISO 22631:2019)

Dieses Dokument legt ein Prüfverfahren für die Messung der Haftung eines mit einem vorgegebenen Substrat geklebten flexiblen oder textilen Boden- oder Wandbelags unter der Einwirkung von Schälkräften fest. Die Benennung „Wandbelag“ umfasst keine Art von Papier-Wandtapeten.

Adhésifs - Méthodes d'essai d'adhésifs pour revêtements du sol et muraux - Essai de pelage (ISO 22631:2019)

Le présent document spécifie une méthode d'essai pour mesurer l'adhésion d'un revêtement de sol ou d'un revêtement mural, textile ou résilient, collé sur un support donné et soumis à des forces de pelage. Le terme « revêtement de mur » (ou « revêtement mural ») n'inclut aucun type de papier peint.

Lepila - Preskusna metoda za lepila za talne in stenske obloge - Preskus luščenja (ISO 22631:2019)

Ta evropski standard določa preskusno metodo za merjenje adhezije netekstilne ali tekstilne talne obloge ali stenske obloge, zlepljene na dano podlago pri silah luščenja. Izraz »stenska obloga« ne zajema nobene vrste tapet.

General Information

• Status: Published
• Public Enquiry End Date: 31-Jul-2018
• Publication Date: 18-Aug-2019
• ICS: 83.180 - Adhesives
• Technical Committee: IPMA - Polimer materials and products
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Aug-2019
• Due Date: 06-Oct-2019
• Completion Date: 19-Aug-2019
• Ref Project: EN ISO 22631:2019 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO 22631:2019)

Relations

• Replaces: SIST EN 1372:2015 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test
• Effective Date: 31-Jul-2019
• Revised: SIST EN 1372:2015 - Adhesives - Test method for adhesives for floor and wall coverings - Peel test
• Effective Date: 13-Nov-2017

Overview

EN ISO 22631:2019 - titled Adhesives - Test method for adhesives for floor and wall coverings - Peel test - is a CEN-endorsed adoption of ISO 22631:2019. It specifies a laboratory test method to measure the peel adhesion of resilient or textile floor coverings and wall coverings (note: wall covering excludes wallpaper) bonded to a substrate. The method quantifies resistance to peel forces before and after specified conditioning to help assess adhesive performance and durability.

Key Topics and Requirements

• Scope and purpose: Measures peel resistance of coverings bonded to substrates under defined conditions; intended for resilient and textile coverings.
• Substrates: Uses either fibre cement (autoclaved, 8 mm thick panels) or plywood (5 mm thick panels). Panel width is (50 ± 0.5) mm; test covering pieces are typically 250 mm × 50 mm.
• Apparatus:
  • Notched trowel (notch dimensions set by adhesive manufacturer).
  • Roller (example: 60 ± 5 mm width, mass ~3.50 ± 0.05 kg).
  • Heating/conditioning chamber (20–200 °C adjustable per ISO 9142).
  • Tensile testing machine meeting ISO 7500-1 (class 1).
  • Peeling device with specified rolls.
• Specimen preparation:
  • Cleaning, adhesive sampling (ISO 15605), and conditioning of materials at (23 ± 2) °C and (50 ± 5) % RH (ISO 554).
  • Fibre-cement panels are preheated (e.g., 6 h at ~80 °C) then reconditioned before use.
  • Adhesive applied with a notched trowel and rolled to ensure uniform contact.
• Test procedure and evaluation:
  • Peel resistance is measured using a tensile testing machine and peeling device.
  • Results reported for specified conditioning sequences and expressed according to the standard’s evaluation rules.
• Safety and environmental notes: Normal laboratory practice and responsible waste disposal recommended.

Applications and Who Uses It

• Adhesive manufacturers - product development, quality control, and comparative performance data.
• Flooring and wall-covering manufacturers - validating adhesive/covering compatibility.
• Independent test laboratories and certification bodies - standardized testing for compliance and claims.
• Specifiers, architects, and installers - selecting adhesives suited to substrates (fibre cement or plywood) and service conditions.
• R&D teams - ageing studies and formulation optimization.

Related Standards

• Supersedes EN 1372:2015; identical to ISO 22631:2019.
• Normative references include ISO 472, ISO 554, ISO 7500-1, ISO 9142, ISO 10365, ISO 15605, and EN 1067.

Keywords: EN ISO 22631:2019, peel test, adhesives, floor coverings, wall coverings, test method, adhesion, fibre cement, plywood, conditioning.

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2019
Nadomešča:
SIST EN 1372:2015
Lepila - Preskusna metoda za lepila za talne in stenske obloge - Preskus luščenja
(ISO 22631:2019)
Adhesives - Test method for adhesives for floor and wall coverings - Peel test (ISO
22631:2019)
Klebstoffe - Prüfverfahren für Klebstoffe für Boden- und Wandbeläge - Schälversuch
(ISO 22631:2019)
Adhésifs - Méthodes d'essai d'adhésifs pour revêtements du sol et muraux - Essai de
pelage (ISO 22631:2019)
Ta slovenski standard je istoveten z: EN ISO 22631:2019
ICS:
83.180 Lepila Adhesives
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 22631
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 83.180 Supersedes EN 1372:2015
English Version
Adhesives - Test method for adhesives for floor and wall
coverings - Peel test (ISO 22631:2019)
Adhésifs - Méthodes d'essai d'adhésifs pour Klebstoffe - Prüfverfahren für Klebstoffe für Boden-
revêtements du sol et muraux - Essai de pelage (ISO und Wandbeläge - Schälversuch (ISO 22631:2019)
22631:2019)
This European Standard was approved by CEN on 8 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22631:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 22631:2019) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 193 “Adhesives” the secretariat of which is held by
UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1372:2015.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 22631:2019 has been approved by CEN as EN ISO 22631:2019 without any modification.

INTERNATIONAL ISO
STANDARD 22631
First edition
2019-07
Adhesives — Test methods for
adhesives for floor and wall coverings
— Peel test
Adhésifs — Méthodes d'essai d'adhésifs pour revêtements du sol et
muraux — Essai de pelage
Reference number
ISO 22631:2019(E)
©
ISO 2019
ISO 22631:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

ISO 22631:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus and materials. 2
6 Preparation of the test specimens . 5
6.1 Cleaning . 5
6.2 Sampling of adhesive . 5
6.3 Conditioning of materials . 5
6.3.1 Adhesive and floor and wall coverings . 5
6.3.2 Fibre cement substrate . . 5
6.3.3 Plywood substrate . 5
6.4 Application of adhesive . 5
6.5 Bonding of the test covering . . 5
7 Conditioning of the test specimens . 6
8 Test procedure . 6
9 Evaluation and expression of results . 7
10 Test report . 8
Bibliography . 9
ISO 22631:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see www .iso
.org/iso/foreword .html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 11,
Products.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/members .html.
iv © ISO 2019 – All rights reserved

INTERNATIONAL STANDARD ISO 22631:2019(E)
Adhesives — Test methods for adhesives for floor and wall
coverings — Peel test
SAFETY PRECAUTIONS — Persons using this document should be familiar with the normal
laboratory practice
...