iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61243-2:2000/A2:2003

(Amendment)

Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.

Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.

EN following parallel vote

Arbeiten unter Spannung - Spannungsprüfer -- Teil 2: Resistive (ohmsche) Ausführungen für Wechselspannungen von 1 kV bis 36 kV

Travaux sous tension - Détecteurs de tension -- Partie 2: Type résistif pour usage sur des tensions alternatives de 1 kV à 36 kV

Delo pod napetostjo - Napetostni detektorji - 2. del: Uporovni tip za uporabo na napetostih od 1 kV do 36 kV izmenično (IEC 61243-2:1995/A2:2002)

General Information

Status
Published
Publication Date
31-Mar-2003
ICS
13.260 - Protection against electric shock. Live working
Technical Committee
DPN - Live Working
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-2003
Due Date
01-Apr-2003
Completion Date
01-Apr-2003
Ref Project
EN 61243-2:1997/A2:2002 - Live working - Voltage detectors - Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.

Relations

Amends
SIST EN 61243-2:2000 - Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
Effective Date
01-Apr-2003
Amends
SIST EN 61243-2:2000 - Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
Effective Date
21-Sep-2010
Amends
SIST EN 61243-2:2000 - Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
Effective Date
29-Jan-2023

Buy Standard

EN 61243-2:2000/A2:2003EN 61243-2:2000/A2:2003
PreviousNext
Amendment
EN 61243-2:2000/A2:2003
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61243-2:2000/A2:2003
01-april-2003
'HORSRGQDSHWRVWMR1DSHWRVWQLGHWHNWRUMLGHO8SRURYQLWLS]DXSRUDERQD
QDSHWRVWLKRGN9GRN9L]PHQLþQR ,(&$
Live working - Voltage detectors -- Part 2: Resistive type to be used for voltages of 1 kV
to 36 kV a.c.
Arbeiten unter Spannung - Spannungsprüfer -- Teil 2: Resistive (ohmsche)
Ausführungen für Wechselspannungen von 1 kV bis 36 kV
Travaux sous tension - Détecteurs de tension -- Partie 2: Type résistif pour usage sur
des tensions alternatives de 1 kV à 36 kV
Ta slovenski standard je istoveten z: EN 61243-2:1997/A2:2002
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
SIST EN 61243-2:2000/A2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61243-2:2000/A2:2003

---------------------- Page: 2 ----------------------

SIST EN 61243-2:2000/A2:2003
EUROPEAN STANDARD EN 61243-2/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2002
ICS 13.260; 29.240; 29.260.99
English version
Live working -
Voltage detectors
Part 2: Resistive type to be used for voltages of 1 kV to 36 kV a.c.
(IEC 61243-2:1995/A2:2002)
Travaux sous tension - Arbeiten unter Spannung -
Détecteurs de tension Spannungsprüfer
Partie 2: Type résistif pour usage Teil 2: Resistive (ohmsche) Ausführungen
sur des tensions alternatives für Wechselspannungen
de 1 kV à 36 kV von 1 kV bis 36 kV
(CEI 61243-2:1995/A2:2002) (IEC 61243-2:1995/A2:2002)
This amendment A2 modifies the European Standard EN 61243-2:1997; it was approved by CENELEC
on 2002-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta,
Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61243-2:1997/A2:2002 E

---------------------- Page: 3 ----------------------

SIST EN 61243-2:2000/A2:2003
EN 61243-2:1997/A2:2002 - 2 -
Foreword
The text of document 78/431/FDIS, future amendment 2 to IEC 61243-2:1995, prepared by
IEC TC 78, Live working, was submitted to the IEC-CENELEC paral
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62819:2023(Main)
Live working - Eye, face and head protectors against the effects of electric arc - Performance requirements and test methods (IEC 62819:2022)
EN IEC 62819:2023

This part of IEC 63275-1 gives a test method to evaluate gate threshold voltage shift of silicon carbide (SiC) power metal-oxide-semiconductor field-effect transistors (MOSFETs) using room temperature readout after applying continuous positive gate-source voltage stress at elevated temperature. The proposed method accepts a certain amount of recovery by allowing large delay times between stress and measurement (up to 10h).

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61318:2021(Main)
Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
EN IEC 61318:2021

This document defines methods to assess defects and to verify that products after the
manufacturer process meet the requirements of the corresponding product standard.
The principles of assessment of defects for live working products are detailed in this
document to assist product standard developers in prescribing the best means to achieve
suitable quality of every finished tool, device and piece of equipment.
The following elements are not covered by the present document, but are included in each
product standard:
– type tests;
– provisions and description for routine, sampling and acceptance tests;
– identification and classification of defects;
– risk analysis.
This document does not cover conformity assessment of commercial shipments or
certifications.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61243-1:2021(Main)
Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN IEC 61243-1:2021

This part of IEC 61243 is applicable to portable voltage detectors, with or without built-in power
sources, to be used on electrical systems for voltages of 1 kV to 800 kV AC, and frequencies
of 50 Hz and/or 60 Hz.
This document applies only to voltage detectors of capacitive type used in contact with the bare
part to be tested, as a complete device including its insulating element or as a separate device,
adaptable to an insulating stick which, as a separate tool, is not covered by this document
(see 4.4.2.1 for general design).
Other types of voltage detectors are not covered by this document.
NOTE Self ranging voltage detectors (formally "multi range voltage detectors") are not covered by this document.
Some restrictions or formal interdictions on their use are applicable in case of switchgear of
IEC 62271 series design, due to insulation coordination, on overhead line systems of electrified
railways (see Annex B) and systems without neutral reference. For systems without neutral
reference, the insulating level is adapted to the maximum possible voltage to the earth (ground).
Products designed and manufactured according to this document contribute to the safety of
users provided they are used by persons trained for the work, in accordance with the hot stick
working method and the instructions for use.
Except where otherwise specified, all the voltages defined in this document refer to values of
phase-to-phase voltages of three-phase systems. In other systems, the applicable phase-tophase
or phase-to-earth (ground) voltages are used to determine the operating voltage.

  • Standard
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61472-2:2021(Main)
Live working - Minimum approach distances - Part 2: Method of determination of the electrical component distance for AC systems from 1,0 kV to 72,5 kV
EN IEC 61472-2:2021

IEC 61472-2:2021 specifies a method for determining the electrical component of the minimum approach distances for live working, for AC systems 1 kV up to and including 72,5 kV. This document addresses system overvoltages and the working air distances between equipment and/or workers at different potentials.
The withstand voltage and minimum approach distances determined by the method described in this document can be used only if the following working conditions prevail:


       
  • workers are trained for, and skilled in, working live lines or close to live conductors or equipment;

    •    
  • the operating conditions are adjusted so that the statistical overvoltage does not exceed the value selected for the determination of the required withstand voltage;

    •    
  • transient overvoltages are the determining overvoltages;

    •    
  • tool insulation has no continuous film of moisture present on the surface;

    •    
  • no lightning is observed within 10 km of the work site;

    •    
  • allowance is made for the effect of the conducting components of tools.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60895:2020(Main)
Live working - Conductive clothing
EN IEC 60895:2020

This document is applicable to conductive clothing, worn during live working (especially barehand
working) on AC and DC electrical installations, to provide electrical continuity between all
parts of the clothing and a reduction of electric field inside the clothing.
This document is applicable to conductive clothing assembled from a conductive garment
(jackets and trousers or coveralls forming a one-piece garment) and from conductive component
parts (gloves, hoods or helmets, shoes or boots, overshoe socks and socks) in electrical
systems with nominal voltage up to 1 000 kV AC and up to ±800 kV DC.
This document does not indicate values of protection from the effects of the electric arc,
because any value indicated would not guarantee the necessary protection from the effects of
electric arcs, or the operator would need to wear very heavy and rigid conductive clothing, which
would not allow the execution of the work in safety.
The products designed and manufactured according to this document contribute to the safety
of the users provided they are used by persons trained for the work, in accordance with the live
working methods and the instructions for use.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60900:2018/AC:2020(Corrigendum)
Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC
EN IEC 60900:2018/AC:2020-05

TAN - // IEC Corrigendum

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61482-2:2020(Main)
Live working - Protective clothing against the thermal hazards of an electric arc - Part 2: Requirements
EN 61482-2:2020

IEC 61482-2 is applicable to protective clothing used in work where there is the risk of exposure to an electric arc hazard. This document specifies requirements and test methods applicable to materials and garments for protective clothing for electrical workers against the thermal hazards of an electric arc. Electric shock hazard is not covered by this document, which is applicable in combination with standards covering such hazards. Other effects than the thermal effects of an electric arc like noise, light emissions, pressure rise, hot oil, electric shock, the consequences of physical and mental shock or toxic influences are not covered by this document. Protection of eyes, face, head, hands and feet against electric arc hazard is not covered by this document.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61482-1-1:2019(Main)
Live working - Protective clothing against the thermal hazards of an electric arc - Part 1-1: Test methods - Method 1: Determination of the arc rating (ELIM, ATPV and/or EBT) of clothing materials and of protective clothing using an open arc
EN IEC 61482-1-1:2019

This document specifies test method procedures to determine the arc rating of flame resistant clothing materials and garments or assemblies of garments intended for use in clothing for workers if there is an electric arc hazard. An open arc under controlled laboratory conditions is used to determine the values of ELIM, ATPV or EBT of materials, garments or assemblies of garments. Other effects than the thermal effects of an electric arc like noise, light emissions, pressure rise, hot oil, electric shock, the consequences of physical and mental shock or toxic influences are not covered by this document. Protective clothing for work intentionally using an electric arc, e.g. arc welding, plasma torch, is not covered by this document.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST IEC 60050-651:2019
International Electrotechnical Vocabulary (IEV) - Part 651: Live working

This part of IEC 60050 defines terms specifically relevant to live working. It has the status of a
horizontal standard in accordance with IEC Guide 108, Guidelines for ensuring the coherency
of IEC publications – Application of horizontal standards.
The aim of this IEV part is to provide precise, brief and correct definitions of internationally
accepted concepts in the field of live working, and to name the terms by which these defined
concepts shall be known.
NOTE Complementary terms and definitions of tools, devices and equipment for live working are provided in
IEC 60743, Live working - Terminology for tools, devices and equipment.
This terminology is consistent with the terminology developed in the other specialized parts of
the IEV.
This horizontal standard is primarily intended for use by technical committees in the
preparation of standards in accordance with the principles laid down in IEC Guide 108.
One of the responsibilities of a technical committee is, wherever applicable, to make use of
horizontal standards in the preparation of its publications. The content of this horizontal
standard will not apply unless specifically referred to or included in the relevant publications.

  • Standard
    97 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60900:2018/AC:2019(Corrigendum)
Live working - Hand tools for use up to 1 000 V AC and 1 500 V DC
EN IEC 60900:2018/AC:2019-02

Based on IEC corrigendum

  • Corrigendum
    3 pages
    French language
    sale 10% off
    e-Library read for
    1 day