iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST CR 12101-5:2001

(Main)

Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems

Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems

Migrated from Progress Sheet (TC Comment) (2000-07-10): MODIF. TD BTS1 C 47/92 ++ Res. 23 (SC 1) : will go to Enquiry (MB/981209) ++ To become a CR (BP note) ++ CR (Res BT C 232/1999) (CC/991115) ++ Res BT 9/2000: Publication of CR approved (CC/000410)

Sistemi za odvod dima in toplote - 5. del: Navodila za delovanje in računske metode za sisteme za odvod dima in toplote

General Information

Status
Withdrawn
Publication Date
28-Feb-2001
Withdrawal Date
30-Nov-2005
ICS
13.220.20 - Fire protection
91.140.30 - Ventilation and air-conditioning systems
Technical Committee
POZ - Požarna varnost
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Dec-2005
Due Date
01-Dec-2005
Completion Date
01-Dec-2005
Directive
89/106/EEC - Construction products
Ref Project
CR 12101-5:2000 - Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems

Relations

Replaced By
SIST-TP CEN/TR 12101-5:2005 - Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems
Effective Date
01-Dec-2005

Buy Standard

CR 12101-5:2001CR 12101-5:2001
PreviousNext
Technical report
CR 12101-5:2001
English language
96 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST CR 12101-5:2001
01-marec-2001
6LVWHPL]DRGYRGGLPDLQWRSORWHGHO1DYRGLOD]DGHORYDQMHLQUDþXQVNH
PHWRGH]DVLVWHPH]DRGYRGGLPDLQWRSORWH
Smoke and heat control systems - Part 5: Guidelines on functional recommendations
and calculation methods for smoke and heat exhaust ventilation systems
Ta slovenski standard je istoveten z: CR 12101-5:2000
ICS:
13.220.20 3RåDUQD]DãþLWD Fire protection
91.140.30 3UH]UDþHYDOQLLQNOLPDWVNL Ventilation and air-
VLVWHPL conditioning
SIST CR 12101-5:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 2 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 3 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 4 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 5 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 6 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 7 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 8 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 9 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 10 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 11 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 12 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 13 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 14 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 15 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 16 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 17 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 18 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 19 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 20 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 21 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 22 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 23 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 24 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 25 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 26 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 27 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 28 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 29 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 30 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 31 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 32 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 33 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 34 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 35 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 36 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 37 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 38 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 39 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 40 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 41 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 42 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 43 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 44 ----------------------

SIST CR 12101-5:2001

---------------------- Page: 45 ----------------------

SIST CR 12101-5:2001
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TS CEN/TS 12101-11:2022(Main)
Smoke and heat control systems - Part 11: Horizontal flow powered ventilation systems for enclosed car parks
CEN/TS 12101-11:2022

(1) This technical specification gives minimum design, installation and commissioning requirements for powered smoke and heat control systems for enclosed car parks using horizontal flow powered ventilation, with or without sprinkler protection, on one or more levels, for cars and light commercial vehicles (max 3,5 t), to reach the design objectives outlined in this technical specification.
see design objectives in CEN TC191 SC1 doc. N721, 5.1 (1):
For any fire location, the system shall keep at least one access route sufficiently clear of smoke for fire-fighters from the exterior or from a protected access route (e.g. stairwell) to a distance of 15 m from the front of the fire. Criteria should be verified when the conditions within the car park have reached a steady-state regime.
NOTE: The limit of 15 m is necessary to reach the fire with the jet from the hose nozzle.
(2) This technical specification is applicable for fires of cars powered by petrol or diesel or other fuels which will have a fire performance similar to vehicles powered by petrol or by electricity. It is not applicable for other fires within the car park (e.g. storage).
NOTE: It is assumed that cars powered by fuels other than petrol or diesel will have a fire performance similar to vehicles powered by petrol or diesel.
(3) This technical specification only covers traditional car parks that are with cars parked alongside each other with common access roadways/lanes for cars to be driven in and out. It does not cover other forms of car parking systems, such as stacking systems. Smoke and heat control systems for vehicles more than 3,5 t (lorry parks, coach parks, etc.) are not covered by this technical specification.
(4) This technical specification does not cover requirements for day‐to‐day ventilation.
(5) Any other risks than fire from cars are not covered by this technical specification.

  • Technical specification
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12101-2:2017(Main)
Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
EN 12101-2:2017

This European Standard applies to natural smoke and heat exhaust ventilators (NSHEV) operating as part of smoke and heat exhaust systems (NSHEVS), placed on the market. This standard specifies requirements and gives test methods for natural smoke and heat exhaust ventilators which are intended to be installed in smoke and heat control systems in buildings.

  • Standard
    88 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12101-7:2011(Main)
Smoke and heat control systems - Part 7: Smoke duct sections
EN 12101-7:2011

This European Standard applies to smoke control duct sections, placed on the market and intended to operate as part of a pressure differential system or smoke and heat exhaust system. This standard specifies requirements and gives reference to the test methods defined for smoke control duct sections and their associated components (for example, hangers and other items proven at the time of testing), which are intended to be installed in such systems in buildings. It also provides for the evaluation of conformity of the products to the requirements of this standard. Furthermore, marking and information on installation and maintenance of these products are also given in this European Standard.
To avoid duplication, reference is made to a variety of other standards. To this end, this standard is to be read in conjunction with EN 1366-8, EN 1366-9 and EN 1366-1, for details of the fire resistance testing and EN 13501-4 for corresponding classification.
This standard has not considered in detail the detrimental and/or corrosive effects that may be caused by process chemicals present in the atmosphere, which are drawn through the system intentionally or inadvertently.
This European Standard also governs associated components used together with smoke control duct sections such as turning vanes and silencers, with the exception of natural and powered smoke ventilators and smoke control dampers, which are covered by separate standards.
Ducts for use other than in smoke and heat exhaust/control systems are not covered by this standard.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12101-8:2011(Main)
Smoke and heat control systems - Part 8: Smoke control dampers
EN 12101-8:2011

This European Standard applies to smoke control dampers, placed on the market and intended to operate as part of a pressure differential system or smoke and heat control system. This standard specifies requirements and gives reference to the test methods defined for smoke control dampers and their associated components, such as actuators which are intended to be installed in such systems in buildings. It also provides for the evaluation of conformity of these products to the requirements of this standard. Furthermore, provision on marking and information on installation and maintenance of these products are also given.
This European Standard distinguish between two categories of smoke control dampers, i.e. single compartment smoke control dampers and multi-compartment fire resisting smoke control dampers.
Smoke control dampers covered by this European Standard can be installed into smoke control system ducts or onto the ducts´ surface. They can be installed also into a wall, floor or ceiling/roof elements or onto the surface of these elements.
To avoid duplication, reference is made to a variety of other standards. To this end, this standard is to be read in conjunction with EN 13501-4, prEN 1366-10 and EN 1366-2, for details of the furnace testing.
This standard does not consider in detail the detrimental and/or corrosive effects that may be caused by process chemicals present in the atmosphere, which are drawn through the system intentionally or inadvertently.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12101-4:2009(Main)
Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation
CEN/TR 12101-4:2009

This Technical Report applies to SHEVS when installed in a building. This Technical Report specifies the ability of the system to meet the required performances of the SHEVS as specified by the design of the system. This Technical Report is to help to translate the detailed engineering plan into an installed system, but this Technical Report does not state how the design is made. This Technical Report also covers requirements on components and compatibility between components to ensure that the requirements on the installed system will be met. This Technical report includes requirements for the assembly, installation, commissioning, function testing, maintenance, periodic servicing and routine testing of SHEVS.

  • Technical report
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12101-5:2005(Main)
Smoke and heat control systems - Part 5: Guidelines on functional recommendations and calculation methods for smoke and heat exhaust ventilation systems
CEN/TR 12101-5:2005

This Technical Report gives recommendations and guidance on functional and calculation methods for smoke and heat exhaust ventilation systems for steady-state design fires. It is intended for a variety of building types and applications, including single-storey buildings, mezzanine floors, warehouses with palletized or racked storage, shopping malls, atria and complex buildings, car parks, places of entertainment and public assembly and un-compartmented space within multi-storey buildings.
This Technical Report does not include any functional recommendations for design parameters where the primary purpose of the SHEVS is to assist fire-fighting.
NOTE   Such functional recommendations need to be agreed with the fire service responsible for the building in question. The calculation procedures set out in the annexes of this Technical Report can be used to design the SHEVS to meet whatever recommendations have been agreed.
This Technical Report does not cover the following:
-   smoke clearance, where smoke is exhausted from a building after the fire has been suppressed;
-   cross-ventilation, where wind-induced or fan-induced air currents sweep smoke through and out of the building, usually as part of fire-fighting operational procedures;
-   ventilation of stairwells, which usually represents a special application of smoke clearance and which does not necessarily protect the continued use of the stairwell;
-   fully-involved fires.

  • Technical report
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12101-7:2004(Main)
Smoke and heat control systems - Part 7: Smoke control ducts
prEN 12101-7

This European Standard applies to smoke control system ducts operating as part of smoke and heat control systems, placed on the market. This standard specifies requirements and refers to test methods for smoke control system ducts which are intended to be installed in smoke and heat control systems in buildings.
This European Standard also governs components used within such duct systems, such as turning vanes and silencers, with the exception of natural and powered smoke ventilators and smoke control system dampers, which are covered by separate standards.
Ducts for use other than in smoke and heat control systems are not covered by this standard.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 12101-2:2007
Smoke and heat control systems - Part 2: Specification for Natural smoke and heat exhaust ventilators
prEN 12101-2

Specifies requirements and gives test methods for natural smoke and heat exhaust ventilators which are intended to be installed as a component of a natural smoke and heat exhaust system.

  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
OSIST prEN 12101-8:2004(Main)
Smoke and heat control systems - Part 8: Specification for smoke control dampers
prEN 12101-8

This European Standard applies to smoke control dampers operating as part of a smoke and heat control system placed on the market. This standard specifies requirements and gives reference to the test methods defined for smoke control dampers, which are intended to be installed in smoke and heat control systems in buildings.
To avoid duplication, reference is made to a variety of other standards. To this end this standard is to be read in conjunction with prEN 1366-10, EN 1366-2, EN 1363-1 and EN 1363-2 for details of the furnace testing.
Smoke control dampers covered by this standard can be installed into or onto smoke control system ducts or into or onto the surface of a wall, floor or ceiling/roof. This standard has not considered in detail the detrimental and/or corrosive effects that may be caused by process chemicals present in the atmosphere which are drawn through the system intentionally or inadvertently.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 12101-11:2022(Main)
Smoke and heat control systems - Part 11: Horizontal flow powered ventilation systems for enclosed car parks
CEN/TS 12101-11:2022

(1) This technical specification gives minimum design, installation and commissioning requirements for powered smoke and heat control systems for enclosed car parks using horizontal flow powered ventilation, with or without sprinkler protection, on one or more levels, for cars and light commercial vehicles (max 3,5 t), to reach the design objectives outlined in this technical specification.
see design objectives in CEN TC191 SC1 doc. N721, 5.1 (1):
For any fire location, the system shall keep at least one access route sufficiently clear of smoke for fire-fighters from the exterior or from a protected access route (e.g. stairwell) to a distance of 15 m from the front of the fire. Criteria should be verified when the conditions within the car park have reached a steady-state regime.
NOTE: The limit of 15 m is necessary to reach the fire with the jet from the hose nozzle.
(2) This technical specification is applicable for fires of cars powered by petrol or diesel or other fuels which will have a fire performance similar to vehicles powered by petrol or by electricity. It is not applicable for other fires within the car park (e.g. storage).
NOTE: It is assumed that cars powered by fuels other than petrol or diesel will have a fire performance similar to vehicles powered by petrol or diesel.
(3) This technical specification only covers traditional car parks that are with cars parked alongside each other with common access roadways/lanes for cars to be driven in and out. It does not cover other forms of car parking systems, such as stacking systems. Smoke and heat control systems for vehicles more than 3,5 t (lorry parks, coach parks, etc.) are not covered by this technical specification.
(4) This technical specification does not cover requirements for day‐to‐day ventilation.
(5) Any other risks than fire from cars are not covered by this technical specification.

  • Technical specification
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day