SIST EN 12503-4:2013
(Main)Sports mats - Part 4: Determination of shock absorption
Sports mats - Part 4: Determination of shock absorption
This European Standard specifies a method of test for the determination of shock absorption characteristics of sports mats types 1 to 8 of EN 12503-1:2013, 9 to 11 of EN 12503-2:2001 and 12 of EN 12503-3:2001.
Sportmatten - Teil 4: Bestimmung der Dämpfungseigenschaften
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Dämpfungseigenschaften von Sportmatten der Typen 1 bis 8 (von EN 12503-1:2001), 9 bis 11 (von EN 12503-2:2001) und 12 (von EN 12503-3:2001) fest.
Tapis de sport - Partie 4 : Détermination des caractéristiques d'amortissement au choc
Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Dämpfungseigenschaften von Sportmatten der Typen 1 bis 8 (von EN 12503-1:2001), 9 bis 11 (von EN 12503-2:2001) und 12 (von EN 12503-3:2001) fest.
Športne blazine - 4. del: Ugotavljanje ublažitve udarca
Ta evropski standard določa preskusno metodo za ugotavljanje ublažitve udarca tipov športnih blazin od 1 do 8 po EN 12503-1:2013, od 9 do 11 po EN 12503-2:2001 in 12 po EN 12503-3:2001.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Športne blazine - 4. del: Ugotavljanje ublažitve udarcaSportmatten - Teil 4: Bestimmung der DämpfungseigenschaftenTapis de sport - Partie 4 : Détermination des caractéristiques d'amortissement au chocSports mats - Part 4: Determination of shock absorption97.220.30Oprema za dvoranske športeIndoor sports equipmentICS:Ta slovenski standard je istoveten z:EN 12503-4:2013SIST EN 12503-4:2013en,fr,de01-september-2013SIST EN 12503-4:2013SLOVENSKI
STANDARDSIST EN 12503-4:20021DGRPHãþD
SIST EN 12503-4:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12503-4
July 2013 ICS 97.220.30 Supersedes EN 12503-4:2001English Version
Sports mats - Part 4: Determination of shock absorption
Tapis de sport - Partie 4 : Détermination des caractéristiques d'amortissement au choc
Sportmatten - Teil 4: Bestimmung der Dämpfungseigenschaften This European Standard was approved by CEN on 12 April 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12503-4:2013: ESIST EN 12503-4:2013
EN 12503-4:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Principle. 4 4 Apparatus . 4 4.1 Indentors . 4 4.2 Release mechanism . 6 4.3 Accelerometer . 6 4.4 Data capture and processing . 6 4.5 Thickness measurement . 6 5 Test piece . 6 6 Conditioning and test temperature. 7 7 Procedure . 7 7.1 Procedure A (types 1 to 11) . 7 7.2 Procedure B (type 12) . 8 7.2.1 Homogeneity test . 8 7.2.2 Shock absorption test . 9 8 Expression of results . 10 8.1 Procedure A . 10 8.2 Procedure B . 10 8.2.1 Homogeneity test . 10 8.2.2 Shock absorption test . 10 9 Test report . 10 Bibliography. 12
SIST EN 12503-4:2013
EN 12503-4:2013 (E) 3 Foreword This document (EN 12503-4:2013) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2014, and conflicting national standards shall be withdrawn at the latest by January 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12503-4:2001. This standard EN 12503 "Sports mats" consists of: Part 1: Gymnastic mats, safety requirements Part 2: Pole vault and high jump mats, safety requirements Part 3: Judo mats, safety requirements Part 4: Determination of shock absorption Part 5: Determination of the base friction Part 6: Determination of the top friction Part 7: Determination of static stiffness In relation to EN 12503-4:2001 the following main changes have been made: a) Clause 5 "Test piece" has been amended. b) The document has been editorially revised. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12503-4:2013
EN 12503-4:2013 (E) 4 1 Scope This European Standard specifies a method of test for the determination of shock absorption characteristics of sports mats types 1 to 8 of EN 12503-1:2013, 9 to 11 of EN 12503-2:2001 and 12 of EN 12503-3:2001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated referenc
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Športne blazine - 4. del: Ugotavljanje ublažitve udarcaSports mats - Part 4: Determination of shock absorption97.220.30Oprema za dvoranske športeIndoor sports equipmentICS:Ta slovenski standard je istoveten z:FprEN 12503-4kSIST FprEN 12503-4:2012en,fr,de01-december-2012kSIST FprEN 12503-4:2012SLOVENSKI
STANDARD
kSIST FprEN 12503-4:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 12503-4
October 2012 ICS 97.220.30 Will supersede EN 12503-4:2001English Version
Sports mats - Part 4: Determination of shock absorption
Tapis de sport - Partie 4 : Détermination des caractéristiques d'amortissement au choc
Sportmatten - Teil 4: Bestimmung der Dämpfungseigenschaften This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 136.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 12503-4:2012: EkSIST FprEN 12503-4:2012
FprEN 12503-4:2012 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Principle .44 Apparatus .44.1 Indentors .44.2 Release mechanism .64.3 Accelerometer .64.4 Data capture and processing .64.5 Thickness measurement .65 Test piece .66 Conditioning and test temperature .77 Procedure .77.1 Procedure A (types 1 to 11) .77.2 Procedure B (type 12) .87.2.1 Homogeneity test .87.2.2 Shock absorption test .98 Expression of results . 108.1 Procedure A . 108.2 Procedure B . 108.2.1 Homogeneity test . 108.2.2 Shock absorption test . 109 Test report . 10Bibliography . 12 kSIST FprEN 12503-4:2012
FprEN 12503-4:2012 (E) 3 Foreword This document (FprEN 12503-4:2012) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 12503-4:2001. This standard EN 12503 "Sports mats" consists of: Part 1: Gymnastic mats, safety requirements Part 2: Pole vault and high jump mats, safety requirements Part 3: Judo mats, safety requirements Part 4: Determination of shock absorption Part 5: Determination of the base friction Part 6: Determination of the top friction Part 7: Determination of static stiffness In relation to EN 12503-4:2001 the following main changes have been made: a) Clause 5 "Test piece" has been amended. b) The document has been editorially revised. kSIST FprEN 12503-4:2012
FprEN 12503-4:2012 (E) 4 1 Scope This European Standard specifies a method of test for the determination of shock absorption characteristics of sports mats types 1 to 8 of EN 12503-1:2001, 9 to 11 of EN 12503-2:2001 and 12 of EN 12503-3:2001. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12504-2, Testing concrete in structures — Part 2: Non-destructive testing — Determination of rebound
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.