SIST ETS 300 477 E1:2003

Universal Personal Telecommunication (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device

This ETS describes the mechanical, electrical and logical interface between card and DTMF-devices. This includes the specification of card data and operations as well as of the necessary terminal functions for the communication between card and terminal.

Svetovne osebne telekomunikacije (UPT) – UPT, faza 2 – Funkcijska specifikacija vmesnika čipne kartice (ICC) sistema UPT in naprav za sprejemanje te kartice (CAD) – Dvotonska večfrekvenčna (DTMF) naprava, ki sprejema kartice UPT

General Information

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.040.35 - Telephone networks
• ICS: 35.240.15 - Identification cards. Chip cards. Biometrics
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI ETS 300 477 ed.1 (1996-09) - Universal Personal Telecommunication (UPT); UPT phase 2; Functional specification of the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices (CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ETS 300 477 E1:2003
01-december-2003
6YHWRYQHRVHEQHWHOHNRPXQLNDFLMH837±837ID]D±)XQNFLMVNDVSHFLILNDFLMD
YPHVQLNDþLSQHNDUWLFH,&&VLVWHPD837LQQDSUDY]DVSUHMHPDQMHWHNDUWLFH
&$'±'YRWRQVNDYHþIUHNYHQþQD'70)QDSUDYDNLVSUHMHPDNDUWLFH837
Universal Personal Telecommunication (UPT); UPT phase 2; Functional specification of
the interface of a UPT Integrated Circuit Card (ICC) and Card Accepting Devices
(CADs); UPT card accepting Dual Tone Multiple Frequency (DTMF) device
Ta slovenski standard je istoveten z: ETS 300 477 Edition 1
ICS:
33.040.35 Telefonska omrežja Telephone networks
35.240.15 Identifikacijske kartice in Identification cards and
sorodne naprave related devices
SIST ETS 300 477 E1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 477 E1:2003

---------------------- Page: 2 ----------------------

SIST ETS 300 477 E1:2003
EUROPEAN ETS 300 477
TELECOMMUNICATION September 1996
STANDARD
Source: ETSI TC-NA Reference: DE/NA-064008
ICS: 33.020
Key words: CARD, DTMF, UPT
Universal Personal Telecommunication (UPT);
UPT Phase 2;
Functional specification of the interface of a UPT Integrated
Circuit Card (ICC) and Card Accepting Devices (CADs);
UPT card accepting Dual Tone Multiple Frequency (DTMF) device
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the foregoing
restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 477 E1:2003
Page 2
ETS 300 477: September 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 477 E1:2003
Page 3
ETS 300 477: September 1996
Contents
Foreword .7
1 Scope .9
2 Normative references.9
3 Definitions, symbols and abbreviations.10
3.1 Definitions .10
3.2 Abbreviations .11
3.3 Symbols .12
4 Physical characteristics.13
4.1 Format and layout.13
4.1.1 ID-1 size .13
4.1.2 Plug-in size.13
4.2 Temperature range for card operation.13
4.3 Contacts.13
4.3.1 Provision of contacts .13
4.3.2 Activation and deactivation.13
4.3.3 Contact pressure.14
4.4 Precedence.14
5 Electronic signals and transmission protocols .14
5.1 Supply voltage.14
5.2 Reset (RST) (contact C2) .15
5.3 Programming voltage.15
5.4 Clock (CLK) .15
5.5 I/O (contact C7) .15
5.6 States.16
5.7 Baud rate .16
5.8 ATR.16
5.8.1 Structure and contents .16
5.8.2 PTS procedure .18
5.9 Error handling .19
6 Logical model .19
6.1 General model .19
6.2 File identifier.19
6.3 MF.20
6.4 Dedicated Files .20
6.5 EFs.20
6.5.1 Transparent EF .20
6.5.2 Linear fixed EF .21
6.5.3 Cyclic EF .21
6.6 Methods for selecting a file .22
6.7 Reservation of file IDs.23
7 Security services and facilities .24
7.1 Authentication key.24
7.2 Algorithms and processes .24
7.2.1 Card Holder Verification .24
7.2.2 Strong authentication .25
7.3 File access conditions.25
7.4 Function access condition .26
7.5 Identification, keying and algorithm information.26

---------------------- Page: 5 ----------------------

SIST ETS 300 477 E1:2003
Page 4
ETS 300 477: September 1996
8 Description of the functions . 26
8.1 SELECT . 27
8.2 READ BINARY .27
8.3 UPDATE BINARY . 27
8.4 READ RECORD. 28
8.5 UPDATE RECORD . 28
8.6 SEEK. 29
8.7 VERIFY CHV. 30
8.8 CHANGE CHV . 30
8.9 UNBLOCK CHV . 31
8.10 INTERNAL AUTHENTICATION. 31
9 Description of the commands. 31
9.1 Mapping principles . 31
9.1.1 Command Application Protocol Data Unit . 32
9.1.2 Response APDU. 32
9.1.3 Command APDU conventions. 32
9.2 Definitions and coding.32
9.3 Coding of the commands . 32
9.3.1 SELECT. 32
9.3.2 READ BINARY. 37
9.3.3 UPDATE BINARY. 37
9.3.4 READ RECORD . 37
9.3.5 UPDATE RECORD. 38
9.3.6 SEEK . 38
9.3.7 VERIFY CHV . 39
9.3.8 CHANGE CHV. 39
9.3.9 UNBLOCK CHV. 39
9.3.10 INTERNAL AUTHENTICATION . 39
9.3.11 GET RESPONSE . 40
9.4 Access condition coding. 40
9.5 Coding of CHVs and UNBLOCK CHVs. 41
9.6 Status conditions returned by the card. 41
9.6.1 Security management. 41
9.6.2 Memory management. 42
9.6.3 Referencing management . 42
9.6.4 Application independent errors . 42
9.6.5 Responses to commands which are correctly executed or supporting
chaining mechanism. 42
9.6.6 Commands versus possible status responses . 43
10 Contents of the EFs. 44
10.1 EF . 45
CHV1
10.2 Contents of the EFs at the MF level. 45
10.2.1 EF . 46
ID
10.2.2 EF . 46
ICC
10.2.3 EF (Directory) . 47
DIR
10.2.4 EF (Language preference). 47
LANG
10.2.5 EF . 48
NAME
10.3 Contents of files at the UPT application level. 48
10.3.1 EF . 48
CT
10.3.2 EF (PUI). 48
PUI
10.3.3 EF (Sequence number). 49
SEQ
10.3.4 EF (PIM service table) . 49
PST
10.3.5 EF (Time-out value) . 50
TV
10.3.6 EF (Maximum time-out value). 51
MTV
10.4 Contents of files at the telecom level . 51
10.4.1 EF (Abbreviated Dialling Numbers). 51
ADN
10.4.2 EF (Last number dialled) . 54
LND
10.4.3 EF (Extension1). 54
EXT1
11 Application protocol . 55
11.1 General procedures .57

---------------------- Page: 6 ----------------------

SIST ETS 300 477 E1:2003
Page 5
ETS 300 477: September 1996
11.1.1 Reading an EF (M) .57
11.1.2 Updating an EF (M) .57
11.1.3 Seeking in an EF (O).58
11.1.4 Selecting an EF or DF (M).58
11.2 PIM management procedures .59
11.2.1 PIM initialisation (M) .60
11.2.2 PIM session (M) .61
11.2.3 PIM session termination (M).61
11.2.4 Application selection procedure (M).62
11.2.5 Start timer.62
11.2.6 Timer value substitution (O) .62
11.3 CHV related procedures .63
11.3.1 CHV verification (M) .63
11.3.2 CHV value substitution (O).64
11.3.3 CHV unblocking (O) .64
11.4 UPT security related procedures .64
11.4.1 One pass strong authentication (M) .65
11.5 Telecom procedures (O).66
11.5.1 Dialling numbers.66
11.5.1.1 Update .66
11.5.1.2 Erasure .69
11.5.1.3 Request .70
11.5.1.4 Purge .71
11.6 General information procedures.72
11.6.1 NAME request procedure (O).72
11.6.2 Language preference procedures (O).72
11.6.2.1 Request .72
11.6.2.2 Update .73
Annex A (normative): Plug-in UPT card .74
Annex B (normative): Implementation Conformance Statement (ICS) for the PIM.75
B.1 ICS proforma for the PIM.75
B.2 Identification of the implementation, product supplier and test laboratory client .75
B.3 Identification of the standard.75
B.4 Global statement of conformance.76
B.5 Interpretation of the tables .76
B.6 Physical characteristics.76
B.6.1 ID-1 size .77
B.6.2 Plug-in size.77
B.6.3 Contacts .77
B.7 Electronic signals and transmission protocols.77
B.7.1 Supply voltage VCC (contact C1).78
B.7.2 Reset RST (contact C2) .78
B.7.3 Clock CLK (contact C3).78
B.7.4 I/O (contact C7).78
B.7.5 States .79
B.7.6 Answer to Reset (ATR) .79
B.8 Logical model.80
B.9 Security features and facilities .80
B.10 Description of functions .81
B.11 Contents of the EFs .81
Annex C (normative): Implementation Conformance Statement (ICS) for the CAD .82
UPT
C.1 ICS proforma for the CAD .82
UPT
C.2 Identification of the implementation, product supplier and test laboratory client .82
C.3 Identification of the standard.82
C.4 Global statement of conformance.82
C.5 Interpretation of the tables .83
C.6 Physical characteristics.83
C.7 Electronic signals and transmission protocols.84
C.7.1 Supply voltage VCC (contact C1).84
C.7.2 Reset RST (contact C2) .84

---------------------- Page: 7 ----------------------

SIST ETS 300 477 E1:2003
Page 6
ETS 300 477: September 1996
C.7.3 Clock CLK (contact C3) . 85
C.7.4 I/O (contact C7) . 85
C.7.5 States. 85
C.7.6 Answer to Reset (ATR). 86
C.8 Security features and facilities. 86
C.9 Coding of the commands . 86
C.10 Application protocol. 87
Annex D (informative): Example of a normal UPT session . 88
Annex E (informative): Bibliography . 89
History. 90

---------------------- Page: 8 ----------------------

SIST ETS 300 477 E1:2003
Page 7
ETS 300 477: September 1996
Foreword
This European Telecommunication Standard (ETS) has been produced by the Network Aspects (NA)
Technical Committee of the European Telecommunications Standards Institute (ETSI).
Transposition dates
Date of adoption of this ETS: 16 August 1996
Date of latest announcement of this ETS (doa): 31 December 1996
Date of latest publication of new National Standard
or endorsement of this ETS (dop/e): 30 June 1997
Date of withdrawal of any conflicting National Standard (dow): 30 June 1997

---------------------- Page: 9 ----------------------

SIST ETS 300 477 E1:2003
Page 8
ETS 300 477: September 1996
Blank page

---------------------- Page: 10 ----------------------

SIST ETS 300 477 E1:2003
Page 9
ETS 300 477: September 1996
1 Scope
This European Telecommunication Standard (ETS) defines the interface between the Universal Personal
Telecommunication (UPT) card and the Card Accepting Device (CAD) for the operational phase. It also
defines those aspects of the internal organization of the UPT card which are related to the operational
phase. This is to ensure interoperability between a UPT card and a CAD independently to the respective
manufacturers and UPT service provider.
This ETS only defines the interface between a UPT card and a card reading Dual Tone Multiple
Frequency (DTMF) device (ETS 300 380 [1]).
NOTE: Other types of CADs are under study.
This ETS defines:
- the requirements for the physical characteristics of the UPT card, the electrical signals and the
transmission protocol;
- the model which shall be used as a basis for the design of the logical structure of the UPT card;
- the security features;
- the interface functions;
- the commands for operating the interface functions;
- the contents of the files required for the UPT application;
- the service set to be supported in the UPT card;
- the application protocol (security, services, etc.);
- the Implementation Conformance Statement (ICS) proformas.
This ETS does not specify any aspects related to the administrative management phase. Any internal
technical realization of either the UPT card or the CAD are only specified where these reflect over the
interface. This ETS does not specify any of the security algorithms which may be used.
2 Normative references
This ETS incorporates by dated and undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications
apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest
edition of the publication referred to applies.
[1] I-ETS 300 380: "Universal Personal Telecommunication (UPT); Access devices;
Dual Tone Multi Frequency (DTMF) sender for acoustical coupling to the
microphone of a handset telephone".
[2] ETS 300 391-1: "Universal Personal Telecommunication (UPT); UPT Phase 2;
Realisation of the security architecture".
[3] I-ETS 300 045 (1992): "European digital cellular telecommunication system
(phase 1): Subscriber Identity Module - Mobile Equipment (SIM-ME) interface
specification (GSM 11.11)".
[4] CCITT Recommendation T.50 (1988): "International alphabet No 5
"(ISO 646: 1983, Information processing - ISO 7-bits coded characters set for
information interchange)".
[5] ISO 639 (1988): "Codes for the representation of names of languages".

---------------------- Page: 11 ----------------------

SIST ETS 300 477 E1:2003
Page 10
ETS 300 477: September 1996
[6] ISO 7810 (1985): "Identification cards - Physical characteristics".
[7] ISO 7811-1 (1985): "Identification cards - Recording technique - Part 1:
Embossing".
[8] ISO 7811-3 (1985): "Identification cards - Recording technique - Part 3: Location
of embossed characters".
[9] ISO/IEC 7816-1 (1987): "Identification cards - Integrated circuit(s) cards with
contacts, Part 1: Physical characteristics".
[10] ISO/IEC 7816-2 (1988): "Identification cards - Integrated circuit(s) cards with
contacts, Part 2: Dimensions and locations of the contacts".
[11] ISO/IEC 7816-3 (1990): "Identification cards - Integrated circuit(s) cards with
contacts, Part 3: Electronic signals and transmission protocols".
[12] ISO/IEC 7816-4: "Identification cards - Integrated circuit(s) cards with contacts,
Part 4: Inter-Industry commands for interchange".
[13] ISO 8859-1 (1987): "Information processing - 8-bit single-byte coded graphic
character sets - Part 1: Latin alphabet No. 1".
[14] EN 726-3 (1994): "Terminal Equipment (TE); Requirements for IC cards and
terminals for telecommunication use Part 3: Application independent card
requirements".
[15] EN 726-6 (1994): "Terminal Equipment (TE); Requirements for IC cards and
terminals for telecommunication use - Part 6: Telecommunication features".
[16] ENV 1375-1: "Identification card systems - Intersector integrated circuit(s) card
additional formats - Part 1: ID-000 card size and physical characteristics".
3 Defi
...