SIST EN 60745-2-9:2003/A1:2008

Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers

Superseded by EN 60745-2-9:2009

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-9: Besondere Anforderungen für Gewindeschneider

Outils électroportatifs à moteur - Sécurité -- Partie 2-9: Règles particulières pour les taraudeuses

Ročna električna orodja - Varnost - 2-9. del: Posebne zahteve za stroje za vrezovanje navojev (IEC 60745-2-9:2003/A1:2008)

General Information

• Status: Withdrawn
• Publication Date: 28-Jul-2008
• Withdrawal Date: 05-May-2011
• ICS: 25.100.50 - Taps and threading dies
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 06-May-2011
• Due Date: 29-May-2011
• Completion Date: 06-May-2011
• Directive: 98/37/EC - Machinery
• Ref Project: EN 60745-2-9:2003/A1:2008 - Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for tappers

Relations

• Replaced By: SIST EN 60745-2-9:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers
• Effective Date: 01-Dec-2009
• Amends: SIST EN 60745-2-9:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers
• Effective Date: 01-Sep-2008
• Replaced By: SIST EN 60745-2-9:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers
• Effective Date: 07-Jun-2022
• Amends: SIST EN 60745-2-9:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers
• Effective Date: 28-Jan-2023
• Amends: SIST EN 60745-2-9:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-9:2003/A1:2008
01-september-2008
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DVWURMH]D
YUH]RYDQMHQDYRMHY,(&$
Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for
tappers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-9: Besondere
Anforderungen für Gewindeschneider
Outils électroportatifs à moteur - Sécurité -- Partie 2-9: Règles particulières pour les
taraudeuses
Ta slovenski standard je istoveten z: EN 60745-2-9:2003/A1:2008
ICS:
25.100.50 Navojna rezalna orodja Taps and threading dies
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-9:2003/A1:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-9:2003/A1:2008

---------------------- Page: 2 ----------------------

SIST EN 60745-2-9:2003/A1:2008

EUROPEAN STANDARD
EN 60745-2-9/A1

NORME EUROPÉENNE
May 2008
EUROPÄISCHE NORM

ICS 25.140.20


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-9: Particular requirements for tappers
(IEC 60745-2-9:2003/A1:2008)


Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-9: Règles particulières Sicherheit -
pour les taraudeuses Teil 2-9: Besondere Anforderungen
(CEI 60745-2-9:2003/A1:2008) für Gewindeschneider
(IEC 60745-2-9:2003/A1:2008)




This amendment A1 modifies the European Standard EN 60745-2-9:2003; it was approved by CENELEC on
2008-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-9:2003/A1:2008 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-9:2003/A1:2008
EN 60745-2-9:2008 - 2 -
Foreword
The text of document 61F/674/CDV, future amendment 1 to IEC 60745-2-9:2003, prepared by SC 61F,
Safety of hand-held motor-operated electric tools, of IEC TC 61, Safety of household and similar electrical
appliances, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was
approved by CENELEC as amendment A1 to EN 60745-2-9:2003 on 2008-04-01.
The following dates were fixed:
– l
...

6/29(16., 6,67(1
RSU$

35('67$1'$5'
IHEUXDU
5RþQDHOHNWULþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DWLSNDOD
+DQGKHOGPRWRURSHUDWHGHOHFWULFWRROV6DIHW\3DUW3DUWLFXODUUHTXLUHPHQWV
IRUWDSSHUV
,&6 5HIHUHQþQDãWHYLOND

6,67(1
RSU$HQ
!"#$%&’( )&!*+,%- .

---------------------- Page: 1 ----------------------

61F/674/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJET DE COMITÉ POUR VOTE (CDV)
Project number IEC 60745-2-9-A1 Ed 2.0
Numéro de projet

IEC/TC or SC: Date of circulation Closing date for voting (Voting
SC 61F
Date de diffusion mandatory for P-members)
CEI/CE ou SC:

Date de clôture du vote (Vote
2006-10-20
obligatoire pour les membres (P))
2007-03-23
Titre du CE/SC:    TC/SC Title: Hand-held motor-operated electric
tools - Safety
Secretary: Robert Stoll
Secrétaire:
Also of interest to the following committees Supersedes document
Intéresse également les comités suivants Remplace le document
   61F/664/MCR
Functions concerned
Fonctions concernées
Safety EMC Environment Quality assurance
Sécurité
CEM Environnement Assurance qualité
CE DOCUMENT EST TOUJOURS À L'ÉTUDE ET SUSCEPTIBLE DE THIS DOCUMENT IS STILL UNDER STUDY AND SUBJECT TO CHANGE. IT
MODIFICATION. IL NE PEUT SERVIR DE RÉFÉRENCE. SHOULD NOT BE USED FOR REFERENCE PURPOSES.
LES RÉCIPIENDAIRES DU PRÉSENT DOCUMENT SONT INVITÉS À RECIPIENTS OF THIS DOCUMENT ARE INVITED TO SUBMIT, WITH THEIR
PRÉSENTER, AVEC LEURS OBSERVATIONS, LA NOTIFICATION DES COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF
DROITS DE PROPRIÉTÉ DONT ILS AURAIENT ÉVENTUELLEMENT WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING
CONNAISSANCE ET À FOURNIR UNE DOCUMENTATION EXPLICATIVE. DOCUMENTATION.



Titre :    Title : IEC 60745-2-9-A1 Ed 2.0: Hand-held
motor-operated electric tools - Safety. Part 2-9:

Particular requirements for tappers.



Note d'introduction Introductory note
This amendment aligns this Part 2 with IEC
French version will be circulated at the FDIS
th
60745-1 4 edition.
stage.

ATTENTION ATTENTION
VOTE PARALLÈLE IEC - CENELEC
CEI - CENELEC PARALLEL VOTING
L'attention des Comités nationaux de la CEI, members du The attention of the IEC National Committees, members of
CENELEC, est attirée sur le fait que ce projet de comité CENELEC, is drawn to the fact that this Committee Draft
pour vote (CDV) de Norme internationale est soumis au for Vote (CDV) for an International Standard is submitted
vote parallèe. for parallel voting.
Un bulletin de vote séparé pour le vote CENELEC leur sera A separate form for CENELEC voting will be sent to them
envoyé par le Secrétariat Central du CENELEC. by the CENELEC Central Secretariat.

Copyright © 2006 International Electrotechnical Commission, IEC. All rights reserved. It is
permitted to download this electronic file, to make a copy and to print out the content for the sole
purpose of preparing National Committee positions. You may not copy or "mirror" the file or
printed version of
...