SIST EN 61754-8:1999
(Main)Fibre optic connector interfaces -- Part 8: Type CF08 connector family
Fibre optic connector interfaces -- Part 8: Type CF08 connector family
Defines the standard interface dimensions for the type CF08 family of connectors which is a single-way plug connector, characterized by a conical ferrule butting against a sphere. It includes a push -pull coupling mechanism and a ferrule spring loaded in the direction of the optical axis. The plug has a single male key which may be used to orient and limit the relative rotation between the connector and the component to which it is mated.
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 8: Bauart CF08 Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 8: Familles de connecteurs de type CF08
Définit les dimensions d'interface normalisées pour la famille de connecteurs de type CF08, composés d'une fiche monovoie et caractérisé par une ferrule conique, butant contre une sphère. Il comporte un mécanisme de verrouillage pousser-tirer et une ferrule comprimée par un ressort dans la direction de l'axe optique. La fiche a une clavette mâle unique qui peut être utilisée pour orienter et limiter la rotation relative entre le connecteur et le composant avec lequel il est accouplé.
Fibre optic connector interfaces - Part 8: Type CF08 connector family (IEC 61754-8:1996)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61754-8:1999
01-maj-1999
Fibre optic connector interfaces - Part 8: Type CF08 connector family (IEC 61754-
8:1996)
Fibre optic connector interfaces -- Part 8: Type CF08 connector family
Steckgesichter von Lichtwellenleiter-Steckverbindern -- Teil 8: Bauart CF08
Steckverbinderfamilie
Interfaces de connecteurs pour fibres optiques -- Partie 8: Familles de connecteurs de
type CF08
Ta slovenski standard je istoveten z: EN 61754-8:1997
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61754-8:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
NORME
CEI
INTERNATIONALE
IEC
1754-8
INTERNATIONAL
Première édition
STANDARD
First edition
1996-10
Interfaces de connecteurs
pour fibres optiques –
Partie 8:
Familles de connecteurs de type CF08
Fibre optic connector interfaces –
Part 8:
CF08 connector family
CEI 1996 Droits de reproduction réservés Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission
microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
CODE PRIX
Commission Electrotechnique Internationale
H
International Electrotechnical Commission PRICE CODE
Pour prix, voir catalogue en vigueur
For price, see current catalogue
---------------------- Page: 2 ----------------------
1754-8 © IEC:1996 – 3 –
CONTENTS
Page
FOREWORD. 5
Clause
1 Scope. 7
2 Description. 7
3 Interfaces . 7
Tables
1 Dimensions of the plug connector interface. 11
2 Dimensions of adaptor and receptacle interfaces . 15
Figures
1 Plug connector interface . 9
2 Adaptor and receptacle interfaces. 13
---------------------- Page: 3 ----------------------
1754-8 © IEC:1996 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
__________
FIBRE OPTIC CONNECTOR INTERFACES –
Part 8: Type CF08 connector family
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, the IEC publishes International Standards. Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization
for Standardization (ISO) in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the form
of standards, technical reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject
of patent rights. The IEC shall not be held responsible for identif
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.