SIST EN 2066:2004

Aerospace series - Extruded section in aluminium alloys - General tolerances

This standard specifies the general tolerances of:
Extruded section
in aluminium alloys
for aerospace applications.
It applies:
-   to sections, standardized or defined by a drawing, the cross section of which, regular or irregular, can be inscribed in a circle of 250  mm

Luft- und Raumfahrt - Strangpressprofile aus Aluminiumlegierungen - Allgemeine Toleranzen

Diese Norm legt die allgemeinen Toleranzen von:
Strangpressprofilen
aus Aluminiumlegierungen
für Anwendungen in der Luft- und Raumfahrt fest.
Sie ist anwendbar auf:
3 Genormte oder in einer Zeichnung festgelegte Profile, deren Querschnitt gleichmäßig oder ungleich-mäßig in einen Kreis von 250 mm eingeschrieben werden kann (siehe Bild 1);

Série aérospatiale - Profilés filés en alliages d'aluminium - Tolérances générales

La présente norme spécifie les tolérances générales des :
Profilés filés
en alliages d'aluminium
pour applications aérospatiales.
Elle s'applique :
-   aux profilés normalisés ou définis par un dessin dont la section, réguliere ou irréguliere, peut etre inscrite dans un cercle de 250 mm

Aerospace series - Extruded section in aluminium alloys - General tolerances

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.025.20 - Aluminium
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 2066:2001 - Aerospace series - Extruded section in aluminium alloys - General tolerances

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Extruded section in aluminium alloys - General tolerancesLuft- und Raumfahrt - Strangpressprofile aus Aluminiumlegierungen - Allgemeine ToleranzenSérie aérospatiale - Profilés filés en alliages d'aluminium - Tolérances généralesAerospace series - Extruded section
in aluminium alloys - General tolerances49.025.20AluminijAluminiumICS:Ta slovenski standard je istoveten z:EN 2066:2001SIST EN 2066:2004en01-maj-2004SIST EN 2066:2004SLOVENSKI
STANDARD



SIST EN 2066:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 2066December 2001ICS 49.025.20English versionAerospace series - Extruded section in aluminium alloys -General tolerancesSérie aérospatiale - Profilés filés en alliages d'aluminium -Tolérances généralesLuft- und Raumfahrt - Strangpreßprofile ausAluminiumlegierungen - Allgemeine ToleranzenThis European Standard was approved by CEN on 2 May 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 2066:2001 ESIST EN 2066:2004



EN 2066:2001 (E)2ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers(AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn atthe latest by June 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,Spain, Sweden, Switzerland and the United Kingdom.SIST EN 2066:2004



EN 2066:2001 (E)30IntroductionThis standard is part of the series of EN metallic material standards for aerospace applications. The generalorganization of this series is described in EN 4258.1ScopeThis standard specifies the general tolerances of:Extruded sectionin aluminium alloysfor aerospace applications.It applies:–to sections, standardized or defined by a drawing, the cross section of which, regular or irregular, canbe inscribed in a circle of 250
mm (see figure 1),
...