Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at break and tensile energy absorption (ISO 12625-4:2005)

This part of prEN 12625 specifies a test method for the determination of the tensile strength, stretch at break and tensile energy absorption of tissue paper and tissue products using a tensile testing apparatus operating with a constant rate of elongation. This European Standard also specifies the method of calculating the tensile index and the tensile energy absorption index.

Tissue-Papier und Tissue-Produkte - Teil 4: Bestimmung der breitenbezogenen Bruchkraft, der Bruchdehnung und des Arbeitsaufnahmevermögens (ISO 12625-4:2005)

Dieser Teil der ISO 12625 legt ein Prüfverfahren zur Bestimmung der breitenbezogenen Bruchkraft, Bruchdehnung und des Arbeitsaufnahmevermögens von Tissue-Papier und Tissue-Produkten fest. Hierfür wird ein Zugprüfgerät, das mit konstanter Dehngeschwindigkeit arbeitet, verwendet.
Diese Internationale Norm legt außerdem noch ein Verfahren zur Berechnung des Bruchkraftindexes und des Arbeitsaufnahmevermögen-Indexes fest.
Darüber hinaus wird ausdrücklich darauf hingewiesen, dass zur Erkennung von Unreinheiten und Verunreinigungen in Tissue-Papier und Tissue-Produkten ISO 15755 angewendet werden sollte.
Für die Bestimmung des Feuchtegehaltes in Tissue-Papier und Tissue-Produkten sollte ISO 287 angewendet werden.

Papier tissu et produits en tissu - Partie 4: Détermination de la résistance a la rupture par traction, de l'allongement a la rupture par traction et de l'absorption d'énergie a la rupture par traction (ISO 12625-4:2005)

L'ISO 12625-4:2005 spécifie une méthode d'essai pour la détermination de la résistance à la rupture par traction, de l'allongement à la rupture par traction et de l'énergie absorbée à la rupture par traction, du papier tissue et des produits tissues. Elle utilise un appareil d'essai de traction fonctionnant à une vitesse d'allongement constante.
L'ISO 12625-4:2005 spécifie également la méthode de calcul de l'indice de rupture par traction et de l'indice d'énergie absorbée à la rupture par traction.

Tissue papir in proizvodi iz tissue papirja - 4. del: Ugotavljanje natezne trdnosti in absorpcijske natezne energije (ISO 12625-4:2005)

General Information

Status
Withdrawn
Publication Date
30-Jun-2005
Withdrawal Date
19-Feb-2017
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
17-Feb-2017
Due Date
12-Mar-2017
Completion Date
20-Feb-2017

RELATIONS

Buy Standard

Standard
SIST EN ISO 12625-4:2005
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 12625-4:2005
01-julij-2005
1DGRPHãþD
SIST EN 12625-4:2000

Tissue papir in proizvodi iz tissue papirja - 4. del: Ugotavljanje natezne trdnosti in

absorpcijske natezne energije (ISO 12625-4:2005)

Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at

break and tensile energy absorption (ISO 12625-4:2005)
Tissue-Papier und Tissue-Produkte - Teil 4: Bestimmung der breitenbezogenen
Bruchkraft, der Bruchdehnung und des Arbeitsaufnahmevermögens (ISO 12625-4:2005)

Papier tissu et produits en tissu - Partie 4: Détermination de la résistance a la rupture par

traction, de l'allongement a la rupture par traction et de l'absorption d'énergie a la rupture

par traction (ISO 12625-4:2005)
Ta slovenski standard je istoveten z: EN ISO 12625-4:2005
ICS:
85.080.20 Tissue papir Tissue paper
SIST EN ISO 12625-4:2005 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12625-4:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 12625-4:2005
EUROPEAN STANDARD
EN ISO 12625-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2005
ICS 85.060 Supersedes EN 12625-4:1999
English version
Tissue paper and tissue products - Part 4: Determination of
tensile strength, stretch at break and tensile energy absorption
(ISO 12625-4:2005)

Papier tissu et produits en tissu - Partie 4: Détermination Tissue-Papier und Tissue-Produkte - Teil 4: Bestimmung

de la résistance à la rupture par traction, de l'allongement à der breitenbezogenen Bruchkraft, der Bruchdehnung und

la rupture par traction et de l'absorption d'énergie à la des Arbeitsaufnahmevermögens (ISO 12625-4:2005)

rupture par traction (ISO 12625-4:2005)
This European Standard was approved by CEN on 15 March 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12625-4:2005: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12625-4:2005
EN ISO 12625-4:2005 (E)
Foreword

This document (EN ISO 12625-4:2005) has been prepared by Technical Committee CEN/TC 172 "Pulp,

paper and board", the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC

6 "Paper, board and pulps”.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn

at the latest by October 2005.
This document supersedes EN 12625-4:1999.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland

and United Kingdom.
---------------------- Page: 4 ----------------------
SIST EN ISO 12625-4:2005
INTERNATIONAL ISO
STANDARD 12625-4
First edition
2005-04-15
Tissue paper and tissue products —
Part 4:
Determination of tensile strength, stretch
at break and tensile energy absorption
Papier tissu et produits en tissu —
Partie 4: Détermination de la résistance à la rupture par traction, de
l'allongement à la rupture par traction et de l'absorption d'énergie à la
rupture par traction
Reference number
ISO 12625-4:2005(E)
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 12625-4:2005
ISO 12625-4:2005(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2005

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 12625-4:2005
ISO 12625-4:2005(E)
Contents Page

Foreword............................................................................................................................................................ iv

1 Scope...................................................................................................................................................... 1

2 Normative references ........................................................................................................................... 1

3 Terms and definitions........................................................................................................................... 2

4 Principle ................................................................................................................................................. 2

5 Apparatus............................................................................................................................................... 2

6 Conditioning .......................................................................................................................................... 3

7 Preparation of test pieces .................................................................................................................... 3

8 Procedure............................................................................................................................................... 4

9 Calculation............................................................................................................................................. 4

10 Test report.............................................................................................................................................. 6

11 Precision ................................................................................................................................................ 7

Bibliography ....................................................................................................................................................... 9

© ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 12625-4:2005
ISO 12625-4:2005(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 12625-4 was prepared by the European Committee for Standardization (CEN) Technical Committee

CEN/TC 172, Pulp, paper and board, in collaboration with Technical Committee ISO/TC 6, Paper, board and

pulps, Subcommittee SC 2, Test methods and quality specifications for paper and board, in accordance with

the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

This first edition cancels and replaces EN 12625-4:1999, which has been technically revised.

With regard to EN 12625-4:1999, the following changes have been made:
a) a more precise definition of the measurement was added;
b) “preparation of test pieces” was explained more exactly;
c) editorial updating.

ISO 12625 consists of the following parts, under the general title Tissue paper and tissue products:

 Part 1: General guidance on terms

 Part 3: Determination of thickness, bulking thickness and apparent bulk density

 Part 4: Determination of tensile strength, stretch at break and tensile energy absorption

 Part 5: Determination of wet tensile strength
 Part 6: Determination of grammage
 Part 7: Determination of optical properties

 Part 8: Water absorption time and water absorption capacity, basket immersion test method

 Part 9: Determination of ball burst strength
iv © ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 12625-4:2005
INTERNATIONAL STANDARD ISO 12625-4:2005(E)
Tissue paper and tissue products —
Part 4:
Determination of tensile strength, stretch at break and tensile
energy absorption
1 Scope

This part of ISO 12625 specifies a test method for the determination of the tensile strength, stretch at break

and tensile energy absorption of tissue paper and tissue products. It uses a tensile-testing apparatus

operating with a constant rate of elongation.

It also specifies the method of calculating the tensile index and the tensile energy absorption index.

It is expressly stated that the detection of impurities and contraries in tissue paper and tissue products should

be applied according to ISO 15755.

For the determination of moisture content in tissue paper and tissue products, ISO 287 should be applied.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.
ISO 186, Paper and board — Sampling to determine average quality

ISO 187, Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for

monitoring the atmosphere and conditioning of samples
ISO 536, Paper and board — Determination of grammage

ISO 1924-2:1994, Paper and board — Determination of tensile properties — Part 2: Constant rate of

elongation method

ISO 7500-1, Metallic materials — Verification of uniaxial testing machines — Part 1: Tension/compression

testing machines — Verification and calibration of the force-measuring system

ISO 12625-1, Tissue paper and tissue products — Part 1: General guidance on terms

ISO 12625-6, Tissue paper and tissue products — Part 6: Determination of grammage

© ISO 2005 – All rights reserved 1
---------------------- Page: 9 ----------------------
SIST EN ISO 12625-4:2005
ISO 12625-4:2005(E)
3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 12625-1 and the following apply.

3.1
tensile strength
maximum tensile fo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.