SIST EN 60512-20-1:2010

Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame (IEC 60512-20-1:2010)

This part of IEC 60512, when required by the detail specification, is used for testing connectors within the scope of technical committee 48. It may also be used for similar devices when specified in a detail specification. The object of this standard is to detail a standard method to determine the flammability of a connector when exposed to a needle-flame under specified conditions. The needle-flame test is intended to simulate the effect of small flames which may result from fault conditions within the equipment, i.e. the intensity of the ignition source used is of a similar order to that of an accidentally overheated or burning single electronic component.

Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 20-1: Prüfungen auf Feuersicherheit - Prüfung 20a: Brennbarkeit, Nadelflamme (IEC 60512-20-1:2010)

Connecteurs pour équipements électroniques - Essais et mesures - Partie 20-1: Essais relatifs aux risques du feu - Essai 20a: Inflammabilité, brûleur-aiguille (CEI 60512-20-1:2010)

La CEI 60512-20-1:2010 est utilisée pour les essais des connecteurs du domaine d'activité du comité d'études 48, lorsque la spécification particulière l'exige. Elle peut également être utilisée pour des dispositifs similaires lorsqu'une spécification particulière le stipule. L'objet de cette norme est de définir une méthode normalisée pour déterminer l'inflammabilité d'un connecteur exposé à un brûleur-aiguille dans des conditions déterminées. L'essai au brûleur-aiguille est destiné à simuler l'effet de petites flammes qui peuvent provenir de défauts internes à l'équipement, c'est-à-dire que l'intensité de la source d'allumage utilisée est du même ordre que celle provenant de la surchauffe accidentelle ou de la combustion d'un composant électronique individuel.

Konektorji za elektronsko opremo - Preskusi in meritve - 20-1. del: Preskusi požarne nevarnosti - Preskus 20a: Vnetljivost, iglasti plamen (IEC 60512-20-1:2010)

Ta del IEC 60512, kadar ga zahteva podrobna specifikacija, se uporablja za preskušanje konektorjev v okviru tehničnega odbora 48. Lahko se uporablja tudi za podobne naprave, kadar ga določa podrobna specifikacija. Cilj tega standarda je podrobno opredeliti metodo določevanja vnetljivosti konektorja, kadar je izpostavljen iglastemu plamenu pod določenimi pogoji. Preskus z iglastim plamenom je namenjen simulaciji učinka majhnih plamenov, katerih vzrok so lahko napačni pogoji znotraj opreme, t.j. intenzivnost uporabljenega vira vžiga je podobna intenzivnosti nenamerno preveč segrete ali goreče posamezne elektronske komponente.

General Information

• Status: Published
• Publication Date: 22-Jul-2010
• ICS: 13.220.40 - Ignitability and burning behaviour of materials and products
• ICS: 31.220.10 - Plug-and-socket devices. Connectors
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 14-Jul-2010
• Due Date: 18-Sep-2010
• Completion Date: 23-Jul-2010
• Ref Project: EN 60512-20-1:2010 - Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Konektorji za elektronsko opremo - Preskusi in meritve - 20-1. del: Preskusi požarne nevarnosti - Preskus 20a: Vnetljivost, iglasti plamen (IEC 60512-20-1:2010)Steckverbinder für elektronische Einrichtungen - Mess- und Prüfverfahren - Teil 20-1: Prüfungen auf Feuersicherheit - Prüfung 20a: Brennbarkeit, Nadelflamme (IEC 60512-20-1:2010)Connecteurs pour équipements électroniques - Essais et mesures - Partie 20-1: Essais relatifs aux risques du feu - Essai 20a: Inflammabilité, brûleur-aiguille (CEI 60512-20-1:2010)Connectors for electronic equipment - Tests and measurements - Part 20-1: Fire hazard tests - Test 20a: Flammability, needle-flame (IEC 60512-20-1:2010)31.220.10Plug-and-socket devices. Connectors13.220.40Sposobnost vžiga in obnašanje materialov in proizvodov pri gorenjuIgnitability and burning behaviour of materials and productsICS:Ta slovenski standard je istoveten z:EN 60512-20-1:2010SIST EN 60512-20-1:2010en01-september-2010SIST EN 60512-20-1:2010SLOVENSKI
STANDARD



SIST EN 60512-20-1:2010



EUROPEAN STANDARD EN 60512-20-1 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60512-20-1:2010 E
ICS 31.220.01
English version
Connectors for electronic equipment -
Tests and measurements -
Part 20-1: Fire hazard tests -
Test 20a: Flammability, needle-flame (IEC 60512-20-1:2010)
Connecteurs pour équipements électroniques -
Essais et mesures -
Partie 20-1: Essais relatifs aux risques
du feu -
Essai 20a: Inflammabilité, brûleur-aiguille (CEI 60512-20-1:2010)
Steckverbinder für elektronische Einrichtungen -
Mess- und Prüfverfahren -
Teil 20-1: Prüfungen auf Feuersicherheit - Prüfung 20a: Brennbarkeit, Nadelflamme (IEC 60512-20-1:2010)
This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60512-20-1:2010



EN 60512-20-1:2010 - 2 - Foreword The text of document 48B/2160/FDIS, future edition 1 of IEC 60512-20-1, prepared by SC 48B, Connectors, of IEC TC 48, Electromechanical components and mechanical structures for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60512-20-1 on 2010-07-01. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-04-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2013-07-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60512-20-1:2010 was approved by CENELEC as a European Standard without any modification. __________ SIST EN 60512-20-1:2010



- 3 - EN 60512-20-1:2010 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60695-11-5 - Fire hazard testing -
Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 -
SIST EN 60512-20-1:2010



SIST EN 60512-20-1:2010



IEC 60512-20-1Edition 1.0 2010-06INTERNATIONAL STANDARD NORME INTERNATIONALEConnectors for electronic equipment – Tests and measurements –
Part 20-1: Fire hazard tests – Test 20a: Flammability, needle-flame
Connecteurs pour équipements électroniques – Essais et mesures –
Partie 20-1: Essais relatifs aux risques du feu – Essai 20a: Inflammabilité, brûleur-aiguille
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE FICS 31.220.01 PRICE CODECODE PRIXISBN 978-2-88910-971-5
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ® SIST EN 60512-20-1:2010



– 2 – 60512-20-1 © IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
CONNECTORS FOR ELECTRONIC EQUIPMENT – TESTS AND MEASUREMENTS –
Part 20-1: Fire hazard tests –
Test 20a: Flammability, needle-flame
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Co
...