iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1097-6:2002

(Main)

Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption

Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption

This European Standard specifies methods for the determination of the particle density and water absorption of aggregates. The first five methods are applicable to normal aggregates with a sixth method for lightweight aggregates. The principal methods specified are: a) a wire basket method for aggregates passing a 63 mm sieve but retained on a 31,5 mm sieve; b) pyknometer methods for aggregates passing a 31,5 mm sieve but retained on a 0,063 mm sieve.

Prüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 6: Bestimmung der Rohdichte und der Wasseraufnahme

Diese Europäische Norm legt Verfahren für die Bestimmung der Rohrdichte und Wasseraufnahme von Gesteinskörnungen fest. Die ersten fünf Verfahren sind für übliche Gesteinskörnungen anwendbar, das sechste Verfahren gilt für leichte Gesteinskörnungen. Die wichtigsten festgelegten Verfahren sind: a) ein Drahtkorbverfahren für Gesteinskörnungen, die durch ein 63-mm-Sieb hindurchgehen, jedoch von einem 31,5-mm-Sieb zurückgehalten werden; b) Pyknometer-Verfahren für Gesteinskörnungen, die durch ein 31,5-mm-Sieb hindurchgehen, jedoch von einem 0,063-mm-Sieb zurückgehalten werden.

Essais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 6: Détermination de la masse volumique réelle et du coefficient d'absorption d'eau

La présente Norme européenne spécifie les méthodes de détermination de la masse volumique réelle et du coeffient d'absorption d'eau des granulats. Les cinq premieres méthodes s'appliquent aux granulats courants, la sixieme concernant les granulats légers. Les principales méthodes spécifiées sont: a) la méthode du panier en treillis pour les granulats passant au tamis de 63 mm et refusés au tamis de 31,5 mm; b) les méthodes au pycnometre pour les granulats passant au tamis de 31,5 mm et refusés au tamis de 0,063 mm.

Preskusi mehanskih in fizikalnih lastnosti agregatov - 6. del: Določevanje prostorninske mase zrn in vpijanja vode

General Information

Status
Withdrawn
Publication Date
31-Aug-2002
Withdrawal Date
10-Sep-2013
ICS
91.100.15 - Mineral materials and products
Technical Committee
AGR - Aggregates
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
05-Sep-2013
Due Date
28-Sep-2013
Completion Date
11-Sep-2013
Directive
89/106/EEC - Construction products
Mandate
M/125 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on aggregates
Ref Project
EN 1097-6:2000 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption

Relations

Amended By
SIST EN 1097-6:2002/A1:2005 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Effective Date
22-Dec-2008
Corrected By
SIST EN 1097-6:2002/AC:2004 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Effective Date
22-Dec-2008
Replaced By
SIST EN 1097-6:2013 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Effective Date
01-Oct-2013
Amended By
SIST EN 1097-6:2002/A1:2005 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Effective Date
08-Jun-2022
Replaced By
SIST EN 1097-6:2013 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Effective Date
08-Jun-2022
Corrected By
SIST EN 1097-6:2002/AC:2004 - Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
Effective Date
08-Jun-2022

Buy Standard

EN 1097-6:2002EN 1097-6:2002
PreviousNext
Standard
EN 1097-6:2002
English language
28 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.ORþHYDQMHPrüfverfahren für mechanische und physikalische Eigenschaften von Gesteinskörnungen - Teil 6: Bestimmung der Rohdichte und der WasseraufnahmeEssais pour déterminer les caractéristiques mécaniques et physiques des granulats - Partie 6: Détermination de la masse volumique réelle et du coefficient d'absorption d'eauTests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 1097-6:2000SIST EN 1097-6:2002en01-septembe
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 933-6:2023(Main)
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
EN 933-6:2022

This document specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm.
NOTE 1   For coarse aggregates between 4 mm and 20 mm, the flow coefficient is linked with the percentage of crushed or broken surfaces of an aggregate and can therefore be used in association with the method specified in EN 933–5. Shape and surface texture characteristics also influence the result.
NOTE 2   Experience of this test has been generally limited to natural aggregates.
Examples of test data sheets are given in informative Annexes A and C.
Annex B (informative) contains precision data.
WARNING - The use of this part of EN 933 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1097-7:2023(Main)
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
EN 1097-7:2022

This document specifies the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. For other purposes, in particular factory production control, other methods can be used provided that an appropriate working relationship with the reference method has been established.
NOTE   Methods for determination of particle density of aggregates are specified in EN 1097 6.
Annexes are included that specify the procedures for calibration of the pyknometer (Annex A) and determination of the density of the liquid used to determine the particle density of the filler (Annex B).
Annex C (informative) contains precision data.
WARNING - The use of this part of EN 1097 can involve hazardous materials, operations and equipment (such as liquids, dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 933-5:2023(Main)
Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates
EN 933-5:2022

This document specifies the reference method, used for type testing and in case of dispute, for the determination of the percentages of crushed particles, totally crushed particles and totally rounded particles in a sample of natural coarse aggregate or all-in aggregate. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established.
NOTE 1   Examples of advanced test methods can be found in the Bibliography.
This document applies to gravel or to a mixture of natural coarse aggregates containing gravel. The test method specified is applicable to particle sizes between 4 mm and 63 mm.
NOTE 2   For coarse aggregate between 4 mm and 20 mm, the percentages of crushed surfaces are linked to the flow coefficient and can therefore be used in association with the test method specified in EN 933-6.
Subclause 7.1 specifies the procedure for test portions consisting of one particle size fraction and Subclause 7.2 specifies the procedure for test portions consisting of two or more particle size fractions.
Guidance for estimated mass of the test portion is given in informative Annex A.
Examples of application of the test procedure and an example of a test data sheet are given in informative Annexes B and C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 932-3:2022(Main)
Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description
EN 932-3:2022

This document specifies a basic procedure for the identification of the petrographic type of natural aggregates. Precise petrographic identification, of technical mineralogy and petrography for civil engineering or specific end uses, requires further examination and is therefore excluded from the scope of this document.
NOTE 1   A qualified geologist (petrographer), with experience of materials used in civil engineering and aware of the composition of the deposit, has sufficient skills to sample and name the rock.
NOTE 2   For precise petrographic identification, a non-exhaustive list of reference literature is given in the Bibliography.
This document covers only natural aggregates. It is used to describe massive rocks and unconsolidated rocks.
Annex A provides guidance on the petrographic nomenclature by giving definitions of simple petrographic terms applicable to rock types used for aggregates.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 933-9:2022(Main)
Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test
EN 933-9:2022

This document specifies the reference method used for type testing and in cases of dispute, for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also specifies the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the suitable reference method has been established.
A conformity check, adding a single quantity of dye solution equivalent to a specified limiting value and which can be used as part of a production control process, is described in informative Annex B.
Annex C specifies the preparation of 10 g/l methylene blue solution and Annex D specifies the procedure for the determination of the methylene blue value of kaolinite (MBk). Annexes C and D are normative.
An example of a test data sheet is given in informative Annex E.
WARNING - The use of this part of EN 933 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1097-6:2022(Main)
Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
EN 1097-6:2022

This document specifies the reference methods used for type testing and in case of dispute, for the determination of particle density and water absorption of normal weight and lightweight aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established. For convenience, some of these other methods are also described in this document.
The reference methods for normal weight aggregates are:
-   a wire basket method for aggregate particles retained on the 31,5 mm sieve (Clause 7, except for railway ballast which uses Annex B);
-   a pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained on the 4 mm test sieve (Clause 8);
-   a pyknometer method for aggregate particles passing the 4 mm test sieve and retained on the 0,063 mm test sieve (Clause 9).
In Clauses 7, 8 and 9, three different particle density parameters (oven-dried particle density, saturated and surface-dried particle density and apparent particle density) and water absorption are determined after a soaking period of 24 h. In Annex B, the oven-dried particle density parameter is determined after soaking in water to constant mass.
For aggregate particles passing the 31,5 mm test sieve and retained on the 4 mm test sieve, the wire basket method in Clause 7 can be used as an alternative to the pyknometer method in Clause 8.
NOTE 1   The wire basket method can also be used for single aggregate particles retained on the 63 mm sieve.
NOTE 2   The pyknometer method described in Clause 8 can be used as an alternative for aggregates passing the 4 mm sieve and retained on the 2 mm sieve.
The reference methods for lightweight aggregates are:
-   a pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained on the 4 mm test sieve (Annex C). Three different particle density parameters (oven-dried particle density, saturated and surface-dried particle density and apparent particle density) and water absorption are determined after pre-drying and a soaking period of 24 h;
-   a method for aggregate particles passing the 4 mm test sieve, mixed with water and filtered in a Büchner funnel (Annex D). The three particle densities and water absorption are determined using a vacuum in the range of 50 mbar to 100 mbar for at least five minutes.
Three other methods for normal weight aggregates can be used to determine the pre-dried particle density, as specified in normative Annexes A and H:
-   a wire basket method for aggregate particles passing the 63 mm test sieve and retained on the 31,5 mm test sieve (A.3);
-   a pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained on the 0,063 mm test sieve (A.4);
-   a pyknometer method for aggregate particles passing the 31,5 mm test sieve, including the 0/0,063 mm size fraction (Annex H).
NOTE 3   If water absorption is less than about 1,5 %, the apparent particle density can be assessed using the pre-dried particle density method as defined in Annex A.
The quick method in normative Annex E can be used in factory production control to determine the apparent particle density of lightweight aggregates.
The method in informative Annex F can be used to determine the particle density and water absorption of aggregates particles passing the 4 mm test sieve.
Data on the density of water at various temperatures is specified in normative Annex G.
Guidance on the significance and use of the various density and water absorption parameters is given in informative Annex I.
Annex J (informative) contains precision data.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1744-4:2022(Main)
Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
EN 1744-4:2021

This document specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture.
A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17438:2020(Main)
Source materials considered in the development of the Aggregate standards of TC 154
CEN/TS 17438:2020

This document informs users about the source materials that have been considered in the development of the aggregate standards:
-   EN 12620 'Aggregates for concrete';
-   EN 13043 'Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked are-as';
-   EN 13139 'Aggregates for mortar';
-   EN 13242 'Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction';
-   EN 13383-1 'Armourstone - Part 1: Product standard';
-   EN 13450 'Aggregates for railway ballast';
-   EN 13055 'Lightweight aggregates';
Only source materials with a history of use in one or more member states are included in this document. It also specifies source material with a history of use for the scope of only one specific aggregate standard.

  • Technical specification
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 933-2:2020(Main)
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
EN 933-2:2020

This document specifies the nominal sizes of apertures for test sieves used for determination of particle size of aggregates.
It applies to
-   test sieves of perforated metal plate having square holes of size from 4 mm and up to 125 mm;
-   test sieves of metal wire cloth having apertures sizes below 4 mm down to 0,063 mm.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1097-2:2020(Main)
Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation
EN 1097-2:2020

This European Standard describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established.
This European Standard applies to natural, manufactured or recycled aggregates used in building and civil engineering.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day