SIST EN 62114:2002
(Main)Electrical insulation systems (EIS) - Thermal classification
Electrical insulation systems (EIS) - Thermal classification
Establishes the thermal classification of an electrical insulation system (EIS). It also identifies recognized procedures for the thermal evaluation of EIS. This standard is applicable to EIS used in electrotechnical devices where the thermal factor is the dominating ageing factor.
Elektrische Isoliersysteme (EIS) - Thermische Klassifizierung
Systèmes d'isolation électrique (SIE) - Classification thermique
Etablit la classification thermique d'un système d'isolation électrique (SIE). Elle identifie également les procédures reconnues pour l'évaluation thermique des SIE. Cette norme s'applique aux SIE utilisés dans les dispositifs électrotechniques pour lesquels le facteur thermique est le facteur de vieillissement principal.
Electrical insulation systems (EIS) - Thermal classification
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62114:2002
01-september-2002
Electrical insulation systems (EIS) - Thermal classification
Electrical insulation systems (EIS) - Thermal classification
Elektrische Isoliersysteme (EIS) - Thermische Klassifizierung
Systèmes d'isolation électrique (SIE) - Classification thermique
Ta slovenski standard je istoveten z: EN 62114:2001
ICS:
29.080.30 Izolacijski sistemi Insulation systems
SIST EN 62114:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62114:2002
---------------------- Page: 2 ----------------------
SIST EN 62114:2002
EUROPEAN STANDARD EN 62114
NORME EUROPÉENNE
EUROPÄISCHE NORM November 2001
ICS 29.080.30
English version
Electrical insulation systems (EIS) -
Thermal classification
(IEC 62114:2001)
Systèmes d'isolation électrique (SIE) - Elektrische Isoliersysteme (EIS) -
Classification thermique Thermische Klassifizierung
(CEI 62114:2001) (IEC 62114:2001)
This European Standard was approved by CENELEC on 2001-11-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62114:2001 E
---------------------- Page: 3 ----------------------
SIST EN 62114:2002
EN 62114:2001 - 2 -
Foreword
The text of document 98/132/FDIS, future edition 1 of IEC 62114, prepared by IEC TC 98, Electrical
insulation systems (EIS), was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62114 on 2001-11-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.