SIST EN ISO 9016:2022
(Main)Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2022)
Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2022)
This document specifies the method to be used when describing test specimen location and notch
orientation for the testing and reporting of impact tests on welded butt joints.
This document applies to impact tests on metallic materials in all forms of product made by any fusion
and pressure welding process.
It is used in addition to the ISO 148 series and includes test specimen denomination and additional
reporting requirements.
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen - Kerbschlagbiegeversuch - Probenlage, Kerbrichtung und Beurteilung (ISO 9016:2022)
Diese Internationale Norm legt vorwiegend die Anwendung der Verfahren für den Kerbschlagbiegeversuch an Stumpfschweißverbindungen fest, die zur Beschreibung der Probenlage und der Kerbrichtung zu verwenden sind.
Diese Internationale Norm gilt für Kerbschlagbiegeversuche an metallischen Werkstoffen jeder Herstellungsart unter Verwendung irgendeines Schweißprozesses.
Sie ist eine Ergänzung zu ISO 148 (alle Teile) und enthält die Probenbezeichnung sowie die zusätzlichen Anforderungen an die Berichterstattung.
Essais destructifs des soudures sur matériaux métalliques - Essai de flexion par choc - Position de l'éprouvette, orientation de l'entaille et examen (ISO 9016:2022)
Le présent document spécifie la méthode à utiliser pour décrire la position de l'éprouvette et l'orientation de l'entaille pour les essais de flexion par choc des assemblages soudés bout à bout et pour l'établissement des rapports d'essai correspondants.
Le présent document s'applique aux essais de flexion par choc d’assemblages soudés à partir de matériaux métalliques sous toute forme de livraison, réalisés par tout procédé de soudage par fusion ou de soudage avec pression.
Elle est utilisée en complément de la série ISO 148 et comprend la dénomination d'éprouvettes et des exigences supplémentaires relatives à l'établissement de rapports d'essai.
Porušitveno preskušanje zvarnih spojev na kovinskih materialih - Udarni preskusi - Položaj preskušanca, smer zareze in preiskava (ISO 9016:2022)
Ta dokument podaja metodo, ki se uporablja za opisovanje položaja preskušanca in smeri zareze pri preskušanju in poročanju o udarnih preskusih soležnih zvarnih spojev. Ta dokument se uporablja za udarne preskuse na kovinskih materialih v vseh oblikah izdelkov, ki so izdelani s postopkom talilnega varjenja in tlačnega varjenja. Uporablja se kot dodatek k standardom skupine ISO 148 ter vključuje imena preskušancev in dodatne zahteve za poročanje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9016:2022
01-september-2022
Nadomešča:
SIST EN ISO 9016:2013
Porušitveno preskušanje zvarnih spojev na kovinskih materialih - Udarni preskusi
- Položaj preskušanca, smer zareze in preiskava (ISO 9016:2022)
Destructive tests on welds in metallic materials - Impact tests - Test specimen location,
notch orientation and examination (ISO 9016:2022)
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen -
Kerbschlagbiegeversuch - Probenlage, Kerbrichtung und Beurteilung (ISO 9016:2022)
Essais destructifs des soudures sur matériaux métalliques - Essai de flexion par choc -
Position de l'éprouvette, orientation de l'entaille et examen (ISO 9016:2022)
Ta slovenski standard je istoveten z: EN ISO 9016:2022
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
SIST EN ISO 9016:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9016:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 9016:2022
EN ISO 9016
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 25.160.40 Supersedes EN ISO 9016:2012
English Version
Destructive tests on welds in metallic materials - Impact
tests - Test specimen location, notch orientation and
examination (ISO 9016:2022)
Essais destructifs des soudures sur matériaux Zerstörende Prüfung von Schweißverbindungen an
métalliques - Essai de flexion par choc - Position de metallischen Werkstoffen - Kerbschlagbiegeversuch -
l'éprouvette, orientation de l'entaille et examen (ISO Probenlage, Kerbrichtung und Beurteilung (ISO
9016:2022) 9016:2022)
This European Standard was approved by CEN on 9 February 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9016:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9016:2022
EN ISO 9016:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9016:2022
EN ISO 9016:2022 (E)
European foreword
This document (EN ISO 9016:2022) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9016:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 9016:2022 has been approved by CEN as EN ISO 9016:2022 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 9016:2022
---------------------- Page: 6 ----------------------
SIST EN ISO 9016:2022
INTERNATIONAL ISO
STANDARD 9016
Third edition
2022-03
Destructive tests on welds in metallic
materials — Impact tests — Test
specimen location, notch orientation
and examination
Essais destructifs des soudures sur matériaux métalliques — Essai de
flexion par choc — Position de l'éprouvette, orientation de l'entaille et
examen
Reference number
ISO 9016:2022(E)
© ISO 2022
---------------------- Page: 7 ----------------------
SIST EN ISO 9016:2022
ISO 9016:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 9016:2022
ISO 9016:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Method of denomination . 1
5.1 Lettering system . 1
5.2 Characters. 1
5.3 Additional information. 2
6 Examples of denomination .2
7 Examination . 6
8 Test report . 6
Annex A (informative) Example of a test report. 7
Bibliography . 8
iii
© ISO 2022 – All rights reserved
---------------------- Page: 9 ----------------------
SIST EN ISO 9016:2022
ISO 9016:2022(E)
Foreword
ISO (the International O
...
SLOVENSKI STANDARD
oSIST prEN ISO 9016:2020
01-september-2020
Porušitveni preskusi zvarov na kovinskih materialih - Udarni preskusi - Položaj
preskušanca, smer zareze in preiskava (ISO/DIS 9016:2020)
Destructive tests on welds in metallic materials - Impact tests - Test specimen location,
notch orientation and examination (ISO/DIS 9016:2020)
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen -
Kerbschlagbiegeversuch - Probenlage, Kerbrichtung und Beurteilung (ISO/DIS
9016:2020)
Essais destructifs des soudures sur matériaux métalliques - Essai de flexion par choc -
Position de l'éprouvette, orientation de l'entaille et examen (ISO/DIS 9016:2020)
Ta slovenski standard je istoveten z: prEN ISO 9016
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
oSIST prEN ISO 9016:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 9016:2020
---------------------- Page: 2 ----------------------
oSIST prEN ISO 9016:2020
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9016
ISO/TC 44/SC 5 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2020-07-15 2020-10-07
Destructive tests on welds in metallic materials — Impact
tests — Test specimen location, notch orientation and
examination
Essais destructifs des soudures sur matériaux métalliques — Essai de flexion par choc — Position de
l'éprouvette, orientation de l'entaille et examen
ICS: 25.160.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 9016:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
oSIST prEN ISO 9016:2020
ISO/DIS 9016:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 9016:2020
ISO/DIS 9016:2020(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Method of denomination. 1
5.1 Lettering system . 1
5.2 Characters . 1
5.3 Additional information . 2
6 Examples of denomination . 2
7 Examination . 5
8 Test report . 5
Annex A (informative) Example of a test report . 6
Bibliography . 7
© ISO 2020 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 9016:2020
ISO/DIS 9016:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanatio
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.