oSIST prEN IEC 61298-3:2024
(Main)Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities
Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities
Prozessmess-, -steuer- und -regelgeräte - Allgemeine Methoden und Verfahren für die Bewertung des Betriebsverhaltens - Teil 3: Prüfungen der Auswirkungen von Einflussgrößen
Dispositifs de mesure et de commande de processus - Méthodes et procédures générales d'évaluation des performances - Partie 3: Essais pour la détermination des effets des grandeurs d'influence
Naprave za merjenje in nadzor procesa - Splošne metode in postopki za ocenjevanje lastnosti - 3. del: Preskusi na učinke vplivnih veličin
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Naprave za merjenje in nadzor procesa - Splošne metode in postopki za
ocenjevanje lastnosti - 3. del: Preskus na učinke vplivnih veličin
Process measurement and control devices - General methods and procedures for
evaluating performance - Part 3: Tests for the effects of influence quantities
Prozessmess-, -steuer- und -regelgeräte - Allgemeine Methoden und Verfahren für die
Bewertung des Betriebsverhaltens - Teil 3: Prüfungen der Auswirkungen von
Einflussgrößen
Dispositifs de mesure et de commande de processus - Méthodes et procédures
générales d'évaluation des performances - Partie 3: Essais pour la détermination des
effets des grandeurs d'influence
Ta slovenski standard je istoveten z: prEN IEC 61298-3:2024
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
65B/1271/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61298-3 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2024-09-06 2024-11-29
SUPERSEDES DOCUMENTS:
65B/1247/CD, 65B/1260/CC
IEC SC 65B : MEASUREMENT AND CONTROL DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Wallie Zoller
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some
Countries” clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the
final stage for submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Process measurement and control devices - General methods and procedures for evaluating
performance - Part 3: Tests for the effects of influence quantities
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing National
Committee positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for
any other purpose without permission in writing from IEC.
IEC CDV 61298-3 ED3 © IEC 2024 -2- 65B/1271/CDV
1 CONTENTS
2 FOREWORD . 4
3 INTRODUCTION . 6
4 1 Scope . 7
5 2 Normative references . 7
6 3 Terms and definitions . 9
7 4 General considerations . 9
8 4.1 Criteria . 9
9 4.2 General procedures . 9
10 4.3 General EMC requirements . 10
11 5 Ambient temperature effects . 10
12 5.1 Criteria . 10
13 5.2 Test procedure . 10
14 6 Ambient relative humidity effects . 11
15 7 Vibration . 12
16 7.1 General considerations . 12
17 7.2 Initial resonance search . 13
18 7.3 Endurance conditioning by sweeping . 13
19 7.4 Final resonance search . 13
20 7.5 Final measurements . 13
21 8 Shock, drop and topple . 14
22 9 Mounting position . 14
23 10 Over-range . 14
24 11 Output load effects . 15
25 11.1 Electrical output . 15
26 11.2 Pneumatic output . 15
27 12 Power supply . 15
28 12.1 Supply voltage and frequency variations . 15
29 12.2 Transient supply voltage effects . 16
30 12.3 Supply voltage depression . 16
31 12.4 Short-term supply voltage interruptions . 17
32 12.5 Fast transient/burst immunity requirements. 18
33 12.6 Surge immunity requirements . 18
34 12.7 Reverse supply voltage protection (d.c. devices) . 18
35 12.8 Supply pressure variations. 18
36 12.9 Supply pressure interruptions . 18
37 12.10 Conducted radio frequency requirements . 18
38 13 Superimposed voltages . 19
39 13.1 Line to earth voltages . 19
40 13.2 Line to line voltages (series mode) . 19
41 13.3 Earthing . 19
42 14 Harmonic distortion effects . 19
43 15 Magnetic field effects. 20
44 16 Electromagnetic field immunity test . 20
45 17 Electrostatic discharge . 20
IEC CDV 61298-3 ED3 © IEC 2024 -3- 65B/1271/CDV
46 18 Effect of open-circuited and short-circuited input . 20
47 19 Effect of open-circuited and short-circuited output . 21
48 20 Effects of process medium conditions . 21
49 20.1 Temperature of process fluid . 21
50 20.2 Flow of process fluid through the device . 21
51 Static line pressure effect . 21
20.3
52 21 Atmospheric pressure effects . 22
53 22 Flow of purge gas through the device . 22
54 23 Accelerated operational life test. 23
55 24 Operational long-term drift test (optional) . 23
56 Bibliography . 25
58 Figure 1 – Arrangement for supply voltage depression or interruption tests . 17
59 Figure 2 – Arrangement for harmonic distortion effects test . 20
60 Figure 4 – Test set-up of the effects of static pressure . 22
61 Figure 5 – Time schedule of input changes and changes of ambient temperature . 23
63 Table 1 – Ambient temperature test ranges . 10
64 Table 2 – Vibration test levels . 12
65 Table 3 – Power supply classes (IEC 60654-2) . 16
66 Table 4 – Power supply commutations-interruptions (IEC 60654-2) . 17
67 Table 7 – Conducted RF characteristics (IEC 61326-1) . 18
IEC CDV 61298-3 ED3 © IEC 2024 -4- 65B/1271/CDV
71 INTERNATIONAL ELECTROTECHNICAL COMMISSION
72 –––––––––––
74 PROCESS MEASUREMENT AND CONTROL DEVICES –
75 GENERAL METHODS AND PROCEDURES
76 FOR EVALUATING PERFORMANCE –
78 Part 3: Tests for the effects of influence quantities
81 FOREWORD
82 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
83 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
84 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
85 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
86 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
87 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
88 in the subject dealt with may participate in this preparatory work. International, governmental and non-
89 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
90 with the International Organization for Standardization (ISO) in accordance with conditions determined by
91 agreement between the two organizations.
92 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
93 consensus of opinion on the relevant subjects since each technical committee has representation from all
94 interested IEC National Committees.
95 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
96 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
97 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
98 misinterpretation by any end user.
99 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
100 transparently to the maximum extent possible in their national and regional publications. Any divergence
101 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
102 the latter.
103 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
104 equipment declared to be in conformity with an IEC Publication.
105 6) All users should ensure that they have the latest edition of this publication.
106 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
107 members of its technical committees and IEC National Committees for any personal injury, property damage or
108 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
109 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
110 Publications.
111 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
112 indispensable for the correct application of this publication.
113 9) Atte
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.