iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13045:2001

(Main)

Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

This standard specifies the diameter, length, wall thickness and shoulder geometry of cylindrical plastic flexible tubes. It is applicable to tubes used for packing pharmaceutical, cosmetic, hygiene, food and other dom stic and industrial products.

Packmittel - Zylindrische Kunststofftuben - Maße und Grenzabmaße

Diese Norm legt die Durchmesser, Längen, Manteldicken und Schultergeometrie zylindrischer Kunststofftuben fest. Sie findet Anwendung bei Tuben zum Verpacken von Produkten der Pharmazie, der Kosmetik, der Hygiene sowie für Lebensmittel und für Industrie- und Haushaltsprodukte.

Emballage - Tubes souples cylindriques plastiques - Dimensions et tolérances

Le présent document spécifie les diametres, longueurs, épaisseurs de parois et la géométrie des épaules des tubes souples plastiques cylindriques. Il s'applique aux tubes utilisés pour le conditionnement de produits pharmaceutiques, cosmétiques, produits d'hygiene, ainsi qu'aux produits a usage alimentaire, et autre produits industriels ou domestiques.

Embalaža - Upogibne valjaste plastične tube - Mere in odstopanja

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
12-Oct-2009
ICS
55.120 - Cans. Tins. Tubes
Technical Committee
EPO - Packaging - sales and grouped
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Oct-2009
Due Date
04-Nov-2009
Completion Date
13-Oct-2009
Directive
80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
Ref Project
EN 13045:2000 - Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances

Relations

Replaced By
SIST EN 13045:2009 - Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
Effective Date
01-Nov-2009

Buy Standard

EN 13045:2001EN 13045:2001
PreviousNext
Standard
EN 13045:2001
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Packmittel - Zylindrische Kunststofftuben - Maße und GrenzabmaßeEmballage - Tubes souples cylindriques plastiques - Dimensions et tolérancesPackaging - Flexible cylindrical plastic tubes - Dimensions and tolerances5
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12374:2023(Main)
Packaging - Flexible tubes - Terminology
EN 12374:2022

This standard defines the technical vocabulary in German, French and English, widely in use for flexible tubes.
It is applicable to metal, plastic, multilayer or laminated tubes that are used for packing pharmaceutical, cosmetic,
hygiene, food and other domestic or industrial products.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12377:2023(Main)
Packaging - Flexible tubes - Test method for the air tightness of closures
EN 12377:2022

This European Standard specifies a test method for airtightness of the closures for flexible tubes.
It is applicable to flexible single-layer metal or plastics tubes and multilayer or laminated tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16565:2023(Main)
Packaging - Flexible tubes - Test method to determine the orientation of the flip-top cap
EN 16565:2022

This European Standard specifies a method to test the orientation of the flip-top cap on flexible tubes.
It is applicable to aluminium, plastic and laminated tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.
Attention: During the systematic review 2020 Turkey submitted a comment that the scope will probably have to be limited to cylindrical tubes. This needs to be discussed within CEN/TC 261/SC 5/WG 26.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13048:2023(Main)
Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method
EN 13048:2022

This document specifies a method for the determination of the thickness of the lacquer film applied inside cylindrical and conical aluminium tubes. The method is a reference. It can also be used as a reference when calibrating other electronic instruments suitable for determining coating weight thickness, e.g. by capacitance measurement by eddy current. It is applicable to aluminium tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic products.
NOTE   Although not specified in this standard there are available suitable automatic film thickness measurement instruments that provide instantaneous results with good accuracy (< 1 µm).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13045:2022(Main)
Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances
EN 13045:2022

This standard specifies the diameter, length, wall thickness and shoulder geometry of cylindrical plastic flexible tubes.
It is applicable to tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16285:2022(Main)
Packaging - Flexible aluminium tubes - Test method to measure the deformation of the aluminium tube body (Guillotine test)
EN 16285:2021

This document specifies a method to measure the deformation of the aluminium tube body.
It is applicable to cylindrical aluminium tubes used for packing pharmaceutical, cosmetic, hygiene, food and other domestic and industrial products.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15421:2022(Main)
Packaging - Flexible aluminium tubes - Determination of the adhesion of the internal and external protective lacquering
EN 15421:2021

This standard specifies a method for the determination of the adhesion of the internal and external protective lacquer of aluminium tubes.
It is applicable to aluminium tubes that are coated with an internal or external protective lacquer and which are used for packing, e.g. pharmaceutical, cosmetic, hygiene, food and other household products.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17220:2019(Main)
Packaging - Flexible aluminium tubes - Tube nozzles
EN 17220:2019

This standard is applicable to flexible aluminum tubes.
This standard defines the dimensions of the tube nozzle including orifice and thread.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15384-1:2017(Main)
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 1: Sodium chloride test
EN 15384-1:2017

This European Standard is applicable for internally coated cylindrical and conical aluminium tubes, mainly used for the packing of pharmaceutical, cosmetic, hygiene, food or other household products.
The internal coating is used as a barrier and should avoid any contact between aluminium and the product. This European Standard defines the sodium chloride method to detect the electrolyte conductivity as one criterion for the quality of the internal coating.
NOTE   The electrolyte conductivity of the internal coating is only one criterion for evaluation of the quality of an internal coating. It does not give any information on the quantity or size of any pores or uncoated areas, nor any hint on possible reactions between the aluminium tube and the product. The electrolyte conductivity is never used as the sole criterion for quality evaluation of the internal coating, but always with other parameters, e.g. film thickness, acetone and/or ammonia resistance and of course results of enhanced stability studies.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15384-2:2017(Main)
Packaging - Test method to determine the porosity of the internal coating of flexible aluminium tubes - Part 2: Copper sulphate test
EN 15384-2:2017

This European Standard is applicable for internally coated cylindrical aluminium tubes, mainly used for the packing of pharmaceutical, cosmetic, hygiene, food or other household products.
The internal coating is used as a barrier and should avoid any contact between aluminium and the product. This European Standard defines the copper sulphate method to detect the electrolyte conductivity as one criterion for the quality of the internal coating.
NOTE   The electrolyte conductivity of the internal coating is only one criterion for evaluation of the quality of an internal coating. It does not give any information on the quantity or size of any pores or uncoated areas, nor any hint on possible reactions between the aluminium tube and the product. The electrolyte conductivity is never used as the sole criterion for quality evaluation of the internal coating, but always with other parameters, e.g. film thickness, acetone and/or ammonia resistance and of course results of enhanced stability studies.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day