Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape - Type M2

Defines dimensions and other characteristics of equipment which are necessary to ensure the interchangeability of recorded cassettes. The requirements relate to 525 line-60 field and 625 line-50 field systems.

Videoband-Kassettensystem mit Schrägspuraufzeichnung auf Magnetband 12,65 mm (0,5 in) - Typ M2

Système de magnétoscope à cassette à balayage hélicoïdal utilisant la bande magnétique de 12,65 mm (0,5 in) de type M2

Définit les dimensions et autres caractéristiques des équipements qui sont nécessaires à l'interchangeabilité des cassettes enregistrées. Les exigences indiquées sont relatives aux systèmes à 525 lignes-60 trames et aux systèmes à 625 lignes-50 trames.

Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape - Type M2 (IEC 61118:1993)

General Information

Status
Published
Publication Date
31-Mar-1999
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Apr-1999
Due Date
01-Apr-1999
Completion Date
01-Apr-1999

Buy Standard

Standard
EN 61118:1999
English language
88 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61118:1999
01-april-1999
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape -
Type M2 (IEC 61118:1993)
Helical-scan video tape cassette system using 12,65 mm (0,5 in) magnetic tape - Type
M2
Videoband-Kassettensystem mit Schrägspuraufzeichnung auf Magnetband 12,65 mm
(0,5 in) - Typ M2
Système de magnétoscope à cassette à balayage hélicoïdal utilisant la bande
magnétique de 12,65 mm (0,5 in) de type M2
Ta slovenski standard je istoveten z: EN 61118:1993
ICS:
33.160.40 Video sistemi Video systems
SIST EN 61118:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61118:1999

---------------------- Page: 2 ----------------------

SIST EN 61118:1999

---------------------- Page: 3 ----------------------

SIST EN 61118:1999

---------------------- Page: 4 ----------------------

SIST EN 61118:1999

---------------------- Page: 5 ----------------------

SIST EN 61118:1999

---------------------- Page: 6 ----------------------

SIST EN 61118:1999
CEI
NORME
IEC
INTERNATIONALE
1118
INTERNATIONAL
Première édition
STANDARD
First edition
1993-07
Système de magnétoscope à cassette
à balayage hélicoïdal utilisant
la bande magnétique de 12,65 mm (0,5 in)
de type M2
Helical-scan video tape cassette
system using 12,65 mm (0,5 in)
magnetic tape – Type M2
© CEI 1993 Droits de reproduction réservés — Copyright - all rights reserved
zed ini
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or util
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission
cédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX "^
International Electrotechnical Commission
PRICE CODE J^
Memaywapoitiae 3netcrporexHwvecwaa HoMMccwa
IEC
Pour prix, voir catalogue en vigueur •

For price, see current cata logue

---------------------- Page: 7 ----------------------

SIST EN 61118:1999
1118 ©I EC:1993 - 3 -
CONTENTS
Page
FOREWORD 9
SECTION 1: GENERAL
Clause
11
1.1 Scope
11
1.2 Normative references
11
1.3 Environment and test conditions
11
1.3.1 Environment
13
1.3.2 Reference tape
13
1.3.3 Calibration tape
SECTION 2: VIDEO TAPE CASSETTE
15
2.1 Mechanical parameters
15
2.1.1 Cassette type
15 2.1.2 Dimensions of cassettes
15 2.1.3 Cassette dimension datum system
15
2.1.4 Window and label-pasting faces
17
2.1.5 Identification holes
19
2.1.6 Dimensions of reels
19
2.1.7 Tape windings
2.1.8 Unlocking of lid 19
2.1.9 Opening of lid 19
19
2.1.10 Releasing of reel brake
19
2.1.11 Automatic stop
SECTION 3: VIDEO CASSETTE RECORDERS
3.1 Definitions 19
3.1.1 Scanner 19
3.1.2 Drum 19
3.1.3 Upper drum 19
21
3.1.4 Lower drum
21 3.1.5 Effective drum diameter
21
3.1.6 Helix angle
21
3.1.7 Track angle
3.2 Drum diameter and structure 21
21 3.2.1 Actual upper drum diameter
21
3.2.2 Actual lower drum diameter
3.2.3 Upper drum section 21
21
3.3 Scanner pole tips
3.3.1 Pole tip projection 21
23
3.3.2 Pole tips
23
3.3.3 Chordal distance between luminance and chrominance pole tips

---------------------- Page: 8 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 — 5 —

Page
Clause
23
chrominance pole tips 3.3.4 Axial distance between luminance and
3.3.5 Channel identification 23
23
3.4 Helix angle
23
3.5 Dimensions and locations of records
23
3.5.1 Test environment
25
3.5.2 Tape speed
25
Record locations and dimensions 3.5.3
25 3.5.4 Video record curvature
25 3.5.5 Gap azimuth
25
3.6 Recording characteristics
SECTION 4: TAPE CHARACTERISTICS
4.1 Dimensions of video tape 29
4.1.1 Magnetic tape thickness 29
4.1.2 Magnetic tape width 29
29
4.2 Magnetic tape properties
4.2.1 Type of magnetic tape 29
4.2.2 Magnetic orientation 29
4.2.3 Coercivity 29
4.3 Leader tape and trailer tape 29
4.3.1 Automatic stop 29
Dimensions of leader and trailer tape 29
4.3.2
Splicing 29
4.3.3
SECTION 5: RECORDING CHARACTERISTICS
31 5.1 Video signal recording
5.1.1 Luminance channel 31
5.1.2 Chrominance channel 37
43
5.1.3 Y-C timing
43
Vertical interval subcarrier (VISC) 5.1.4
45
5.2 Longitudinal audio signal recording
45
5.2.1 Recording method
45
Recording/Reproducing reference levels 5.2.2
45
5.2.3 Frequency characteristics
47 5.2.4 Track usage (common audio mode)
49 5.2.5 Program audio head phasing
Recording polarity 49
5.2.6
49 5.3 FM audio signal recording (optional)
49 Recording/Reproducing reference levels 5.3.1
49 5.3.2 Noise reduction
51
Pre-emphasis 5.3.3
51 5.3.4 Frequency modulation
51 5.3.5 Recording head current
51
5.3.6 Recording polarity

---------------------- Page: 9 ----------------------

SIST EN 61118:1999
1118 ©I EC:1993 — 7 —
Page
Clause
51
5.4 Time and control code signal recording
51
5.4.1 Time and control code
51
5.4.2 Recording track
53
5.4.3 Recording method
53
Recording level 5.4.4
53
5.5 Tracking control signal recording
53
5.5.1 Recording track
53 5.5.2 Recording waveform and level
53
5.5.3 Polarity of remanent magnetization
53
5.5.4 Timing and period
53
5.5.5 Colour framing information
53 5.5.6 Magnetization level
53
5.5.7 Rise time
55
5.6 PCM audio recording (PCM audio mode)
55
5.6.1 Source coding
57
5.6.2 Signal processing
75
Figures
169
Annex A — Reference tape

---------------------- Page: 10 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 - 9 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM
USING 12,65 mm (0,5 in) MAGNETIC TAPE –
TYPE M2
FOREWORD
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
1)
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
2)
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use published in the form of standards, technical
3)
reports or guides and they are accepted by the National Committees in that sense.
In order to promote international unification, IEC National Committees undertake to apply IEC International
4)
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
International Standard IEC 1118 has been prepared by IEC by sub-committee 60B: Video
recording, of IEC technical committee 60: Recording.
The text of this standard is based on the following documents:
DIS Report on Voting
60B(CO)162
608(00)135
rt
Full information on the voting for the approval of this standard can be found in the repo
on voting indicated in the above table.

---------------------- Page: 11 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 - 11 -
HELICAL-SCAN VIDEO TAPE CASSETTE SYSTEM
USING 12,65 mm (0,5 in) MAGNETIC TAPE –
TYPE M2
SECTION 1: GENERAL
1.1 Scope
This International Standard is applicable to magnetic video recording using 12,65 mm
(0,5 in) tape cassettes on helical-scan video tape recorders and defines the basic M2
format video cassette system.
This standard also specifies two different audio recording modes:
common audio mode and
1)
2) pulse code modulation audio mode.
PCM audio mode has a limited interchangeability. FM audio recording shown in this
standard is optional.
The object of this International Standard is to define dimensions and other characteristics
of equipment which are necessary to ensure the interchangeability of recorded cassettes.
The requirements given relate to 525 line-60 field and 625 line-50 field systems.
1.2 Normative references
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this International Standard. At the time of publication, the edi-
rties to
tions indicated were valid. All normative documents are subject to revision, and pa
agreements based on this International Standard are encouraged to investigate the possi-
bility of applying the most recent editions of the normative documents indicated below.
Members of IEC and ISO maintain registers of currently valid International Standards.
Magnetic tape sound recording and reproducing systems - Part 1: General
IEC 94-1: 1981,
conditions and requirements.
Time and control code for video tape recorders.
IEC 461: 1986,
Conservation of the polarity of audio signals in radio and television
EBU R-50: 1989,
production installations.
1.3 Environment and test conditions
1.3.1 Environment
Tests and measurements made on the system to check the requirements of this Inter-
national Standard shall be made under the following conditions unless otherwise specified:

---------------------- Page: 12 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 - 13 -
Temperature (drum diameter): 20 °C ± 0,5 °C
Temperature (all other tests): 20 °C ± 1 °C
50% ± 2 %
Relative humidity:
86 kPa to 106 kPa
Barometric pressure:
Conditioning before testing: 24 h
1.3.2 Reference tape
Blank tape to be used for reference recordings may be purchased from the manufacturers
listed in annex A. Electromagnetic compatibility parameters and their specifications shall
be specified by the manufacturer and controlled accordingly.
Electromagnetic compatibility parameters and their specifications are indicated in
annex A.
1.3.3 Calibration tape
Calibration tapes satisfying the following requirements will be available for purchase from
manufacturers of video tape recorders and players in accordance with this format specifi-
cation.
1.3.3.1 Record locations and dimensions
In principle, 50 % reduction in the tolerances shown in table 1 shall be applied to calibra-
tion tapes to be used for the purpose of calibrating the mechanical accuracy of recorders
or players in accordance with this format specification. If necessary, the record locations
and dimensions may be specially modified for some calibration tapes in order to avoid
certain calibration errors or to facilitate certain calibration work.
1.3.3.2 Calibration signals
Two classes of signals shall be recorded on the calibration tapes:
a) A series of conventional analogue component test signals for video tape recorders.
Audio
Video
- 1 kHz - 0 VU
Colour bars
- 15 kHz - 0 VU
Multi-burst
- 20 or 40 Hz - 10 VU
Bowtie
- 1 kHz - 10 VU
Pulse and bar
- 7,5 kHz -10VU
- 10 kHz-10 VU
- 15 kHz -10VU
AFM
- 1 kHz, 70 kHz deviation.

---------------------- Page: 13 ----------------------

SIST EN 61118:1999
- 15 -
1118©IEC:1993
b) Special test signals developed by each manufacturer for product alignment. These
signals are not universally applicable to the products from each manufacturer and are
not specified in this International Standard.
SECTION 2: VIDEO TAPE CASSETTE
2.1 Mechanical parameters
2.1.1 Cassette type
There are two cassette types, characterized by the outside dimensions shown below:
106 mm x 188 mm x 25 mm
- large cassette:
- small cassette: 87 mm x 130 mm x 25 mm
2.1.2 Dimensions of cassettes
The dimensions permitting the interchangeability of cassettes shall be in accordance with
figures 1 to 5 and figures 7 to 11.
Cassette dimension datum system
2.1.3
2.1.3.1 Datum holes
These shall be holes serving for the reference when loading a cassette into the video tape
recorder, and shall also be the reference for the cassette dimensions (see figures 2, 4, 8
and 10).
2.1.3.2 Datum plane Z
This shall be a plane containing three datum positions A, B and C on the bottom of the
cassette (see figures 4 and 10).
Datum plane X
2.1.3.3
rthogonal to datum plane Z and containing
Large cassette: This shall be a plane o
the centre lines of datum holes A and B (see figures 2 and 4).
Small cassette: This shall be a plane parallel to the long side face of the cassette
hogonal to datum plane Z and containing the centre line of
o rt
datum hole A (see figures 8 and 10).
2.1.3.4 Datum plane Y
This shall be the plane orthogonal to both datum planes X and Z and containing the centre
line of datum hole A (see figures 2, 4, 8 and 10).
2.1.4 Window and label-pasting faces
Large cassettes shall conform to figure 1.
Small cassettes shall conform to figure 7.

---------------------- Page: 14 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 - 17 -
2.1.5 Identification holes
8).
Various holes shall be provided for identifying cassette conditions (see figures 2 and
Each hole may be set in the closed state or the open state.
0,25 mm; be able to withstand the
Closed state: The hole depth shall be 0 mm to
0,5 N
normal load of
0,3
3 mm; The hole depth shall be 5 mm or
Open state: The hole diameter shall be
more.
Erasure prevention identification hole
2.1.5.1
Large cassettes shall be defined by figure 2.
Small cassettes shall be defined by figure 8.
The erasure prevention identification hole shall be coupled to the erasure prevention
and may be changed between the closed state and
mechanism shown in figure 1 and 7
the open state. Each state shall be defined as follows:
Identification hole closed: Ready to record.
Not ready to record.
Identification hole open:
2.1.5.2 Tape type identification hole
2.
Large cassettes shall be defined by figure
8.
Small cassettes shall be defined by figure
The closed state of the identification hole shall be defined as follows:
Identification hole closed: Metal tape.
A/m).
(Coercive force: approximately 120 x 10 3
2.1.5.3 Tape thickness identification hole
2.
Large cassettes shall be defined by figure
Small cassettes shall be defined by figure 8.
The closed state of the identification hole shall be defined as follows:
13,5 gm ± 0,5 Rm.
Identification hole closed: Tape total thickness is
2.1.5.4 Extra identification holes
These holes are provided for future usage. The positions of these holes shall be as shown
below:
Large cassettes shall be as defined in figure 2 (five holes).
8 (two holes).
Small cassettes shall be as defined in figure

---------------------- Page: 15 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 - 19 -
2.1.6 Dimensions of reels
Dimensions of the reels shall be in accordance with figure 5 and 11.
2.1.7 Tape windings
The tape winding method and path shall be in accordance with figures 6 and 12.
2.1.8 Unlocking of lid
the large
The lid shall be unlocked when a force of not more than 0,15 N in the case of
cassette, or a force of not more than 0,30 N in the case of the small cassette is applied to
the unlocking clutch as indicated in note 8 of figure 1 and note 6 of figure 7.
2.1.9 Opening of lid
The force necessary for opening the lid shall be not more than 1 N until the lid is opened
to the maximum.
Releasing of reel brake
2.1.10
The reel brakes shall be released by a force of not more than 0,7 N by means of a reel
brake unlocking pin as shown in note 4 of figure 3 and note 3 of figure 9.
2.1.11 Automatic stop
At the end of the tape, transparent leader and trailer tapes are provided for either auto-
matic shut-off or automatic rewind.
SECTION 3: VIDEO CASSETTE RECORDERS
3.1 Definitions
For the purpose of this International Standard, the following definitions apply.
3.1.1 Scanner
A mechanical assembly containing a drum, rotating pole tips and the tape-guiding
elements used to record and reproduce video, FM audio and PCM audio signals.
Drum
3.1.2
A cylindrical column around which the tape is at least partially wrapped in order to form
the head-to-tape interface of the video tape recording system.
3.1.3 Upper drum
of the drum which does not contact the reference edge of the tape (see
That pa rt
figure 14a).

---------------------- Page: 16 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 - 21 -
3.1.4 Lower drum
That part of the drum which contacts the reference edge of the tape and provides tape-
guiding functions (see figure 14a).
3.1.5 Effective drum diameter
The value of drum diameter which yields the actual video and PCM audio record dimen-
sions in a theoretical calculation. This value is greater than or equal to the actual drum
diameter.
3.1.6 Helix angle
The angle formed between the path of the rotating heads and the tape reference edge
guiding system.
3.1.7 Track angle
The angle formed between the video record and the reference edge of the tape.
3.2 Drum diameter and structure
The track angle is determined by parameters such as effective drum diameter, tape
tension, helix angle and tape speed. Different methods of design and/or minor variations
in drum diameter and tape tension will produce equivalent recordings for interchange
purposes.
Actual upper drum diameter
3.2.1
The actual upper drum diameter shall be the dimension specified in figure 14a.
Actual lower drum diameter
3.2.2
The actual lower drum diameter shall be the dimension specified in figure 14a.
3.2.3 Upper drum section
The upper drum section shall rotate together with the video heads.
3.3 Scanner pole tips
Four circumferential pole tips shall be located as shown in figure 13.
3.3.1 Pole tip projection
Each pole tip shall project radially 0,035 mm (nominal value) above the upper drum
surface.

---------------------- Page: 17 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 – 23 –
3.3.2 Pole tips
3.3.2.1 Luminance pole tips
Two pole tips circumferentially arranged 180° ± 0,003° apart shall be provided for the lumi-
nance signal.
3.3.2.2 Chrominance pole tips
Each luminance pole tip shall have an associated pole tip for the time compressed
signal and the FM audio signal.
chrominance
chrominance pole tips
3.3.3 Chordal distance between luminance and
The chordal distance shall be as shown in figure 14b.
Axial distance between luminance and chrominance pole tips
3.3.4
The axial distance shall be as shown in figure 14b.
3.3.5 Channel identification
Suitable means, such as a pulse generator producing one pulse per drum revolution, shall
be provided for identifying the head pair which records Field 1. This pair is identified as
channel 1, and the other pair is identified as channel 2.
3.4 Helix angle
The helix angle formed by the scanner and all associated tape guides shall be 4,250°
± 0,001°.
3.5 Dimensions and locations of records
3.5.1 Test environment
3.5.1.1 In addition to the environmental and general test requirements of clause 1.3, the
following additional conditions shall be met in order to meet requirements of clause 3.5.
Tape tension: 0,31 N ± 0,05 N.
3.5.1.2 Conditioning of the tape stock before recording and testing shall be as follows:
environment: established to the conditions specified in 3.5.1.1;
tape tension: wound on a reel at 0,4 N ± 0,1 N;
conditioning time: 24 h.
3.5.1.3 The reference edge of the tape for dimensions specified in this standard shall be
the lower edge as shown in figures 15 to 18, where the magnetic coating faces are shown.

---------------------- Page: 18 ----------------------

SIST EN 61118:1999
- 25 -
1118 ©IEC:1993
3.5.2 Tape speed
The tape speed shall be as follows:
mm/s, basic;
525 line-60 field system: 67,693
625 line-50 field system: 66,295 mm/s, basic.
3.5.3 Record locations and dimensions
The locations of the common audio mode record shall be as specified in figure 15.
3.5.3.1
Under this
The locations of the PCM audio mode shall be as specified in figure 16.
3.5.3.2
condition, only one longitudinal audio record shall be available.
chrominance (C) signals shall be as
3.5.3.3 The record locations of luminance (Y) and
17 line-60 field system.
specified in figure for the 525
(C) signals shall be as
3.5.3.4 The record locations of luminance (Y) and chrominance
line field system.
specified in figure 18 for the 625 -50
The record dimensions shall be as specified in table 1.
3.5.3.5
The dimensions specified in table 1 are for the tensioned tape; therefore, the
3.5.3.6
elasticity of the tape shall be taken into account for the direct measurements of the tape
without tension.
3.5.4 Video record curvature
The center line of the video and PCM audio records shall be within two parallel straight
lines 0,006 mm apart.
3.5.5 Gap azimuth
The azimuth of the audio, time-and-control codes and tracking control head gaps
3.5.5.1
15 and 16).
shall be perpendicular to the tape transport direction (see figures
-15° and
The azimuth of the video head gaps for the luminance signal shall be
3.5.5.2
+15° to the perpendicular to the head moving direction
for the chrominance signal shall be
(see figures 17 and 18).
3.6 Recording characteristics
The recording characteristics of video tape recorders shall be in accordance with the
5.
requirements specified in section

---------------------- Page: 19 ----------------------

SIST EN 61118:1999
1118 © – 27 –
IEC:1993
Table 1 - Record locations and dimensions
525 line-60 field 625 line-50 field
Item
Nominal Maximum
Minimum Nominal Maximum Minimum
0 0
Time code track lower edge 0 0 0 0 A:
450 500 400 450 500
B: Time code track upper edge 400
38 36 38
C: Colour track width 34 36 34
40,7 42,2 43,7 49,2 49,7 50,2
D. Y-C track pitch
850 900 950
E: Control track lower edge 850 900 950
250 1 300 1 350 1 250 1 300 1 350
F: Control track upper edge 1
1 471 1 499 1 527
G. Video track lower edge 1 469 1 503 1 537
10 668
10 601 10 634 10 668 10 611 10 640
H: Video track upper edge
10 870 10 830 10 850 10 870
J: Audio 1 lower edge 10 830 10 850
11 400 11 450 11 500
K: Audio 1 track upper edge 11 400 11 450 11 500
12 000 11 900 11 950 12 000
L: Audio 2 track lower edge 11 900 11 950
12 650
12 500 12 550 12 650 12 500 12 550 M: Audio 2 track upper edge
56 58
N: Y track width 42 44 46 54
3H ref. 3,5H ref.
O: Lead signal overlap
4 533 (=12H) ref.
P: Y-C track offset 4 505 (=10H) ref.
84,5 ref. 99,4 ref.
O: Video track pitch
11 8254,3 (262,5H) ref. 11 8058,3 (312,5H) ref.
R: Video track length
8 847,1 ref.
W: Video area effective width 8 847,1 ref.
9 973,5 ref. 9 973,5 ref.
W': Video and PCM audio (CH6)
area effective width
202 000 202 000
X: Audio, time code and control track
record offset
1 626 1 631
1 621 1 626 1 631 1 621 Y: Lower limit of W
4,2906° (basic)
4,2977° (basic)
9: Track angle
10717
10 676 10 709 10 743 10 660 10 689 PA: Effective PCM audio track lower edge
(luminance head)
10 768
10 724 10 758 10 791 10 712 10 740
PB: Effective PCM audio track lower edge
(chrominance head)
11 709
11 660 11 693 11 727 11 652 11 680
PC: PCM audio track upper edge
(chrominance head)
416 491
360 450 541 340 PD: Pre-amble
PE: PCM audio data area
11 820 ref. 11 900 ref.
360 450 541 340 416 491
PF: Post-amble
Unit: µm, unless otherwise specified.
NOTE - Ref. indicates those measurements which are fixed by other parameters and are given for reference
purposes only.

---------------------- Page: 20 ----------------------

SIST EN 61118:1999
1118©IEC:1993 - 29 -
TAPE CHARACTERISTICS
SECTION 4:
4.1 Dimensions of video tape
4.1.1 Magnetic tape thickness
The thickness of the magnetic tape, including the coating, shall be 13,5 µm ± 0,5 µm.
4.1.2 Magnetic tape width
The width of the magnetic tape shall be 12,65 mm ± 0,01 mm.
4.2 Magnetic tape properties
4.2.1 Type of magnetic tape
A high coercivity metal particle tape shall be used.
4.2.2 Magnetic orientation
The magnetic coating shall be longitudinally oriented.
4.2.3 Coercivity
A/m).
The coercivity shall be class 1 500 (120 x 10 3
4.3 Leader tape and trailer tape
4.3.1 Automatic stop
The transmittance of the leader and trailer tapes shall be 50 % or more to ensure that the
automatic stopping device of the machine operates properly at both ends of the magnetic
tape.
Dimensions of leader and trailer tape
4.3.2
Leader and trailer tape length shall be 170 mm ± 15 mm for the large cassette and
140 mm ± 10 mm for the small cassette.
Leader and trailer tape thickness shall be 13 pm to 36 pm and the width shall be
12,65 mm ± 0,02 mm.
4.3.3 Splicing
The splice and the attachment of the leader and trailer tapes to the magnetic tape and the
N. The splicing gap shall be 60 pm or less.
hub shall be capable of resisting a force of 20

---------------------- Page: 21 ----------------------

SIST EN 61118:1999
31 -
1118©IEC:1993 -
SECTION 5: RECORDING CHARACTERISTICS
5.1 Video signal recording
Type M2 video tape recorder shall record component video signals. This component video
recording system shall provide independent signal channels for the luminance and
chrominance signals respectively. These component signals shall be recorded on two inde-
pendent tracks on the video tape as frequency modulated signals. Two separate tracks
shall be designated as the Y track for the luminance signals and the C track for the
chrominance signals. The chrominance signals, that is, the R-Y and B-Y colour difference
signals, shall be recorded in the form of a time compressed and time division multiplexed
signal on the C track.
In the case of the FM audio signal recording specified in clause 5.3, it shall be recorded in
the form of a frequency multiplexed signal together with the FM colour difference signal on
the C track.
5.1.1 Luminance channel
5.1.1.1 A signal processing system, as specified in this standard, shall contain the follow-
ing elements in the order of the signal flow:
(1) A circuit for adding a timing burst signal to the luminance signal.
(2) A circuit for adding a vertical interval sub-carrier when appropriate.
(3) A luminance non-linear pre-emphasis circuit.
A luminance pre-emphasis network.
(4)
(5) A circuit for clipping the pre-emphasized luminance signal.
(6) A linear frequency modulator.
A circuit for mixing the PCM audio CH5 signal specified in clause 5.6 with the
(7)
frequency modulated luminance signal.
A recording current amplifier for the Y track and the PCM track video heads.
(8)
5.1.1.2 Burst signal addition
The waveforms of the luminance signal with the burst signal added shall be as shown in
the following figures:
525 line-60 field system: figures 19a to 19c;
625 line-50 field system: figures 20a to 20c.
Burst frequency is locked to horizontal line frequency.
Luminance non-linear emphasis
5.1.1.3
The non-linear emphasis circuits should be as shown in the following figures:

---------------------- Page: 22 ----------------------

SIST EN 61118:1999
1118 ©IEC:1993 - 33 -
525 line-60 field system: figure 21 or its equivalent;
625 line-50 field system: figure 22 or its equivalent.
The typical frequency characteristics of the non-linear emphasis circuit output signal
should be as shown in table 2.
Table 2 - Frequency characteristics of non-linear emphasis
Relative input level
(dB)
Frequency
625 line-50 field system
525 line-60 field system
(MHz)
-20,0
0 -10,0 -20,0 0 -10,0
0
0,01 0 0 0 0 0
-0,50 -0,4
0,1 -0,1 -0,2 +0,1 -0,3
-0,65 -0,65 -0,1
0,2 •-0,4 +0,1 +0,4
-0,80 +0,25 +1,7
0,5 -0,7 +1,1 +1,7
-0,30 +1,90 +4,3
1,0 0 +3,0 +4,0
+4,8 +6,1 +0,15 +3,20 +6,5
2,0 +0,9
+6,8 +0,30 +3,75 +7,6
3,0 +1,3 +5,5
+0,35 +4,10 +8,0
5,0 +1,7 +6,1 +7,2
NOTES
1 For the 525 line-60 field system: 0 dB means 100 % amplitude except sync signal.
For the 625 line-50 field system: 0 dB means 100 % amplitude except sync signal.
2
5.1.1.4 Luminance pre-emphasis
The network and circuit parameters shall be as shown in figure 23.
5.1.1.5 Amplitude clipping
Any positive or negative amplitude excursion exceeding the specified limits shall be
clipped.
The limits determined on the basis of the blanking level shall be as shown in table 3.

---------------------- Page: 23 ----------------------

SIST EN 61118:1999
1118 © IEC:1993 - 35 -
Table 3 - Amplitude clipping levels
625 line-50 field system
525 line-60 field system
+270 % ± 10 %
Positive limit +338 ± 10 %
% ± 10 %
Negative limit -190 % ± 10% -170
above clipping levels are values for the signals where blanking is at 0 % and peak white at 100 % level
NOTE – The
5.1.1.6 FM carrier frequency
Carrier frequencies corresponding to the reference video level shall be as shown in
table 4.
Table 4 - Carrier frequencies corresponding to reference video levels (MHz)
625 line-50 field system
525 line-60 field system
9,20 (nominal)
7,70 (nominal)
100 % white
6,95 (nominal) 8,30 (nominal)
50 % level
6,20 ± 0,05 7,40 ± 0,05
Blanking
5,60 (nominal) 6,63 (nominal)
Sync tip
1,50 ± 0,05 1,80 ± 0,05
Video deviation
5.1.1.7 Recording head current
5.1.1.7.1 The amplitude of the record current for the Y track shall be such that the maxi-
mum level of remanent flux on the tape is produced when recording the Y signal with 50
average picture level.
5.1.1.7.2 The amplitude of the Y track record current shall decrease with increasing
frequency according to a straight line in the range of 2 MHz to 10 MHz contained within
limit lines as shown in figu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.