kSIST FprEN ISO 12643-4:2023

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/FDIS 12643-4:2023)

This part of ISO 12643 provides safety requirements for the design and construction of converting equipment and systems used in the corrugated board, package printing, converting and graphic technology industries (see clause 5). It is applicable to converting equipment not covered by other parts of ISO 12643. This part of ISO 12643 shall be used in conjunction with ISO 12643-1.

Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der graphischen Technik - Teil 4: Ausrüstungen und Systeme der Papierverarbeitung (ISO/FDIS 12643-4:2023)

Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de technologie graphique - Partie 4: Systèmes et équipement de façonnage (ISO/FDIS 12643-4:2023)

Le présent document traite de tous les phénomènes dangereux, situations dangereuses ou événements dangereux significatifs concernant les systèmes et l'équipement de façonnage utilisés dans les secteurs du carton ondulé, de l'impression d'emballage, du façonnage et des technologies graphiques (voir Article 5), lorsqu'ils sont utilisés conformément à l'usage prévu et en cas de mauvais usage raisonnablement prévisible du point de vue du fabricant.
Le présent document est applicable à l'équipement de façonnage non couvert par d'autres parties de l'ISO 12643.
Le présent document n'est pas applicable aux machines et aux composants de machines fabriqués avant sa date de publication.

Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in sisteme - 4. del: Oprema in sistemi za predelavo, dodelavo in oplemenitenje (ISO/FDIS 12643-4:2023).

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Nov-2023
• ICS: 37.100.10 - Reproduction equipment
• Technical Committee: GRT - Graphical technology
• Current Stage: 5520 - Unique Acceptance Procedure (UAP) (Adopted Project)
• Start Date: 05-Sep-2023
• Due Date: 23-Jan-2024
• Completion Date: 09-Nov-2023
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: FprEN ISO 12643-4 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/FDIS 12643-4:2023)

Relations

• Revises: SIST EN 1010-5:2005 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 5: Machines for the production of corrugated board and machines for the conversion of flat and corrugated board
• Effective Date: 28-Jan-2023
• Revises: SIST EN 1010-4:2004+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST FprEN ISO 12643-4:2023
01-november-2023
Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in
sisteme - 4. del: Oprema in sistemi za predelavo, dodelavo in oplemenitenje
(ISO/FDIS 12643-4:2023).
Graphic technology - Safety requirements for graphic technology equipment and
systems - Part 4: Converting equipment and systems (ISO/FDIS 12643-4:2023)
Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der
graphischen Technik - Teil 4: Ausrüstungen und Systeme der Papierverarbeitung
(ISO/FDIS 12643-4:2023)
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de
technologie graphique - Partie 4: Systèmes et équipement de façonnage (ISO/FDIS
12643-4:2023)
Ta slovenski standard je istoveten z: FprEN ISO 12643-4
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
kSIST FprEN ISO 12643-4:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST FprEN ISO 12643-4:2023

---------------------- Page: 2 ----------------------
kSIST FprEN ISO 12643-4:2023
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12643-4
ISO/TC 130
Graphic technology — Safety
Secretariat: SAC
requirements for graphic technology
Voting begins on:
2023-08-23 equipment and systems —
Voting terminates on:
Part 4:
2023-10-18
Converting equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et
l'équipement de technologie graphique —
Partie 4: Systèmes et équipement de façonnage
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12643-4:2023(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 3 ----------------------
kSIST FprEN ISO 12643-4:2023
ISO/FDIS 12643-4:2023(E)
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 12643-4
ISO/TC 130
Graphic technology — Safety
Secretariat: SAC
requirements for graphic technology
Voting begins on:
equipment and systems —
Voting terminates on:
Part 4:
Converting equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et
l'équipement de technologie graphique —
Partie 4: Systèmes et équipement de façonnage
COPYRIGHT PROTECTED DOCUMENT
© ISO 2023
ISO/CEN PARALLEL PROCESSING
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
RECIPIENTS OF THIS DRAFT ARE INVITED TO
ISO copyright office
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
CP 401 • Ch. de Blandonnet 8
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
CH-1214 Vernier, Geneva
DOCUMENTATION.
Phone: [phone]
IN ADDITION TO THEIR EVALUATION AS
Reference number
Email: [e-mail]
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 12643-4:2023(E)
Website: www.iso.org
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
Published in Switzerland
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
ii
  © ISO 2023 – All rights reserved
NATIONAL REGULATIONS. © ISO 2023

---------------------- Page: 4 ----------------------
kSIST FprEN ISO 12643-4:2023
ISO/FDIS 12643-4:2023(E)
Contents Page
Foreword .viii
Introduction .x
1 Scope . 1
2 Normative references .
...