oSIST prEN 13630-12:2021

Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses

This European Standard describes the method of measuring the burning duration of safety fuses.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 12: Bestimmung der Brenndauer von Sicherheitsanzündschnüren

Dieses Dokument legt Verfahren für die Bestimmung der Brenndauer von Sicherheitsanzündschnüren fest.
Die Anwendung des Prüfverfahrens erfolgt unter den Umgebungsbedingungen eines Prüfbereichs im Feld oder in einem Sprengbunker.

Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 12: Détermination de la durée de combustion des mèches de sûreté

Le présent document spécifie des méthodes de détermination de la durée de combustion des mèches de sûreté.
La méthode d'essai est applicable dans les conditions environnementales d'un terrain d’essai ou d'une casemate de tir.

Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 12. del: Ugotavljanje hitrosti gorenja počasi gorečih vžigalnih vrvic

General Information

• Status: Not Published
• Public Enquiry End Date: 02-May-2021
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: IEKS - Explosives
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 03-Mar-2021
• Due Date: 21-Jul-2021
• Completion Date: 07-May-2021
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: prEN 13630-12 - Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses

Relations

• Revised: SIST EN 13630-12:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses
• Effective Date: 01-Apr-2021
• Revised: SIST EN 13630-12:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses
• Effective Date: 18-Jan-2023
• Revised: SIST EN 13630-12:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of burning duration of safety fuses
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13630-12:2021
01-april-2021
Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 12.
del: Ugotavljanje hitrosti gorenja počasi gorečih vžigalnih vrvic
Explosives for civil uses - Detonating cords and safety fuses - Part 12: Determination of
burning duration of safety fuses
Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil
12: Bestimmung der Brenndauer von Sicherheitsanzündschnüren
Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 12:
Détermination de la durée de combustion des mèches de sûreté
Ta slovenski standard je istoveten z: prEN 13630-12
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13630-12:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13630-12:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13630-12:2021


DRAFT
EUROPEAN STANDARD
prEN 13630-12
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13630-12:2002
English Version

Explosives for civil uses - Detonating cords and safety
fuses - Part 12: Determination of burning duration of
safety fuses
Explosifs à usage civil - Cordeaux détonants et mèches Explosivstoffe für zivile Zwecke - Sprengschnüre und
de sûreté - Partie 12: Détermination de la durée de Sicherheitsanzündschnüre - Teil 12: Bestimmung der
combustion des mèches de sûreté Brenndauer von Sicherheitsanzündschnüren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13630-12:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13630-12:2021
prEN 13630-12:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
5.1 Climatic conditioning chamber . 4
5.2 Supporting device . 4
5.3 Tube . 4
5.4 Stopwatch . 5
5.5 Sand. 5
5.6 Means of initiation . 5
6 Preparation of test samples . 5
7 Procedure . 5
7.1 General. 5
7.2 Conditioning of test pieces . 5
7.3 Unconfined test . 6
7.4 Confined test . 6
8 Test report . 6
Annex ZA (informative) Relationship between this European Standard and the essential
safety requirements of Directive 2014/28/EU relating to the making available on the
market and supervision of explosives for civil uses aimed to be covered . 7
Bibliography . 8

2

---------------------- Page: 4 ----------------------
oSIST prEN 13630-12:2021
prEN 13630-12:2021 (E)
European foreword
This document (prEN 13630-12:2021) has been prepared by Technical Committee CEN/TC 321
“Explosives for civil uses”, the secretariat of which is held by UNE.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13630-12:2002.
In comparison with the previous edition, the following technical modifications have been made:
a) the normative references have been updated;
b) Clause 4, Principle, has been added;
c) Annex A, Range of applicability of the test method, has been removed and the content has been revised
and moved to Clause 1, Scope;
d) Annex ZA has been updated.
This document has been prepared under a Standardization Request (M/562) annexed to the Commission
Implementing Decision C(2019)6634 final as regards Explosives for civil uses given to CEN by the
European Commission and the European Free Trade Association, and supports Essential Safety
requir
...