oSIST prEN ISO/ASTM 52928:2023

Additive manufacturing of metals - Feedstock materials - Powder life cycle management (ISO/ASTM DIS 52928:2022)

This document specifies requirements and describes aspects for the lifecycle management of metal feedstock materials for powder based additive manufacturing processes. Those aspects include:
• Powder properties,
• Powder lifecycle,
• Test methods and
• Powder quality assurance.
Note : This document can be used by manufacturers of metal powders, purchasers of powder feedstock for additive manufacturing, those responsible for the quality assurance of additively manufactured parts and suppliers of measurement and testing equipment for characterizing metal powders for use in powder-based additive manufacturing processes

Additive Fertigung von Metallen - Ausgangsmaterialien - Steuerung des Lebenszyklus von Pulvern (ISO/ASTM DIS 52928:2022)

Fabrication additive de métaux - Matières premières - Gestion du cycle de vie de la poudre (ISO/ASTM DIS 52928:2022)

Aditivna proizvodnja kovinskih izdelkov - Surovine - Obvladovanje življenskega cikla prahu (ISO/ASTM DIS 52928:2022)

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Feb-2023
• ICS: 25.030 - Additive manufacturing
• Technical Committee: VAR - Welding
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 23-Nov-2022
• Due Date: 12-Apr-2023
• Completion Date: 12-Jan-2023
• Ref Project: prEN ISO/ASTM 52928 - Additive manufacturing of metals - Feedstock materials - Powder life cycle management (ISO/ASTM DIS 52928:2022)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52928:2023
01-januar-2023
[Not translated]
Additive manufacturing of metals - Feedstock materials - Powder life cycle management
(ISO/ASTM DIS 52928:2022)
Additive Fertigung von Metallen - Ausgangsmaterialien - Steuerung des Lebenszyklus
von Pulvern (ISO/ASTM DIS 52928:2022)
Fabrication additive de métaux - Matières premières - Gestion du cycle de vie de la
poudre (ISO/ASTM DIS 52928:2022)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52928
ICS:
25.030 3D-tiskanje Additive manufacturing
oSIST prEN ISO/ASTM 52928:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52928:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52928:2023
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52928
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-11-17 2023-02-09
Additive manufacturing of metal — Feedstock materials —
Powder life cycle management
ICS: 25.030
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52928:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52928:2023
ISO/ASTM DIS 52928:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52928
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:

Additive manufacturing of metal — Feedstock materials —
Powder life cycle management
ICS: 25.030
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2022 THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
NOT BE REFERRED TO AS AN INTERNATIONAL
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below STANDARD UNTIL PUBLISHED AS SUCH.
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
ISO copyright office ASTM International
TECHNOLOGICAL, COMMERCIAL AND
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
USER PURPOSES, DRAFT INTERNATIONAL
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
Phone: [phone] Phone: [phone]
POTENTIAL TO BECOME STANDARDS TO
Fax: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail] Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org Website: www.astm.org ISO/ASTM DIS 52928:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO/ASTM International 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO/ASTM 52928:2023
ISO/ASTM DIS 52928:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references .
...